[Bluez-users] Socket Rev H?

[Bluez-users] Socket Rev H?

[Anthony R. J. Ball]

  I have been looking all around and going crazy. It seems like 
every time I buy Linux supported hardware the manufacturer has
upped the revision to screw my compatibilty (WRT54GS, PVR-150, now
the socket card, sigh).

  As far as I can tell this card does work, but I am having trouble
finding directions on which incantation I need to perform the proper
magic.

  I am trying to put it on a Zaurus SL-5500 running OpenZaurus 3.5.3
which has a 2.4x kernel in it.

  Can someone point me in the right direction, please? 

-- 
     www.suave.net - Anthony Ball - ant@suave.net
        OSB - http://rivendell.suave.net/Beer
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Use hope and imagination as weapons of survival and progress.



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket Rev H?

[Marcel Holtmann]

Hi Anthony,

>   I have been looking all around and going crazy. It seems like 
> every time I buy Linux supported hardware the manufacturer has
> upped the revision to screw my compatibilty (WRT54GS, PVR-150, now
> the socket card, sigh).
> 
>   As far as I can tell this card does work, but I am having trouble
> finding directions on which incantation I need to perform the proper
> magic.
> 
>   I am trying to put it on a Zaurus SL-5500 running OpenZaurus 3.5.3
> which has a 2.4x kernel in it.
> 
>   Can someone point me in the right direction, please? 

the revision H of the card should work with the serial_cs driver and
then you have to use the hci_uart driver and hciattach to make this card
known to the Bluetooth core.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket Rev H?

[Anthony R. J. Ball]

  Ugh.. still having problems... looking all over for serial_cs modules
for 2.4.18-rmk7-pxa3-embedix... I found some precompiled ones that I
loaded but dmesg says "ds: unable to create instance of 'serial_cs'!"

  Also, when dmesg says
ttyS03 at port 0xc48603f8 (irq = 35) is a 16C950/954
 
  I assume that means /dev/ttyS3... I tried
hciattach ttyS3 csr
hciattach ttyS3 bcsp
and
hciattach ttyS3 any

  None of those seem to work.. any gives back hciconfig, but the
address is all zeros... 

  Thanks a lot for the help, sorry I haven't figured this out already...



On Sat, Oct 08, 2005 at 02:36:20PM +0200, Marcel Holtmann wrote:
> Hi Anthony,
> 
> >   I have been looking all around and going crazy. It seems like 
> > every time I buy Linux supported hardware the manufacturer has
> > upped the revision to screw my compatibilty (WRT54GS, PVR-150, now
> > the socket card, sigh).
> > 
> >   As far as I can tell this card does work, but I am having trouble
> > finding directions on which incantation I need to perform the proper
> > magic.
> > 
> >   I am trying to put it on a Zaurus SL-5500 running OpenZaurus 3.5.3
> > which has a 2.4x kernel in it.
> > 
> >   Can someone point me in the right direction, please? 
> 
> the revision H of the card should work with the serial_cs driver and
> then you have to use the hci_uart driver and hciattach to make this card
> known to the Bluetooth core.
> 
> Regards
> 
> Marcel
> 
> 
> 
> 
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads, discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> Bluez-users mailing list
> Bluez-users@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-users
> 

-- 
     www.suave.net - Anthony Ball - ant@suave.net
        OSB - http://rivendell.suave.net/Beer
-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Good printers do it without wrinkling the sheets. 



-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] Socket Rev H?

[Marcel Holtmann]

Hi Anthony,

>   Ugh.. still having problems... looking all over for serial_cs modules
> for 2.4.18-rmk7-pxa3-embedix... I found some precompiled ones that I
> loaded but dmesg says "ds: unable to create instance of 'serial_cs'!"
> 
>   Also, when dmesg says
> ttyS03 at port 0xc48603f8 (irq = 35) is a 16C950/954
>  
>   I assume that means /dev/ttyS3... I tried
> hciattach ttyS3 csr
> hciattach ttyS3 bcsp
> and
> hciattach ttyS3 any
> 
>   None of those seem to work.. any gives back hciconfig, but the
> address is all zeros... 

you need to use bcsp and specify the correct baudrate. Check the mailing
list archive for details.

Regards

Marcel




-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users