From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Socket Rev H? From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <20051009021816.GA25928@suave.net> References: <20051007150204.GA18594@suave.net> <1128774980.5212.6.camel@blade> <20051009021816.GA25928@suave.net> Content-Type: text/plain Message-Id: <1128849028.15821.2.camel@blade> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Sun, 09 Oct 2005 11:10:28 +0200 Hi Anthony, > Ugh.. still having problems... looking all over for serial_cs modules > for 2.4.18-rmk7-pxa3-embedix... I found some precompiled ones that I > loaded but dmesg says "ds: unable to create instance of 'serial_cs'!" > > Also, when dmesg says > ttyS03 at port 0xc48603f8 (irq = 35) is a 16C950/954 > > I assume that means /dev/ttyS3... I tried > hciattach ttyS3 csr > hciattach ttyS3 bcsp > and > hciattach ttyS3 any > > None of those seem to work.. any gives back hciconfig, but the > address is all zeros... you need to use bcsp and specify the correct baudrate. Check the mailing list archive for details. Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users