From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] Re: bluetooth 1.2 and 2.0 dongles support From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <01C5D0BE.7F71DF60.emonturus@teltronic.es> References: <01C5D0BE.7F71DF60.emonturus@teltronic.es> Content-Type: text/plain Message-Id: <1129287610.5057.42.camel@localhost.localdomain> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Fri, 14 Oct 2005 13:00:10 +0200 Hi Esteban, > >> 2. I have a Cellink BTA-3120 dongle. Although Cellink says that it is > >> Bluetooth 1.2 compliant, when I use it with BlueZ, the HCI version I get > >> with hciconfig is 1.1. Is that wright? > > >Send in the "hciconfig hci0 features" output. > > EWS4:/ # hciconfig hci0 features > hci0: Type: USB > BD Address: 00:0A:94:11:77:F5 ACL MTU: 120:20 SCO MTU: 64:0 > Features: 0xff 0xff 0x05 0x00 0x00 0x00 0x00 0x00 > <3-slot packets> <5-slot packets> > > > this is a Bluetooth 1.1 dongle. > >> 3. I also have an old Belkin F8T001 dongle. When I plugged it BlueZ loaded > >> always some firmware stuff and it worked properly. My old version of BlueZ > >> had a bluez-bluefw-1.0-202 rpm packet. I think this is equivalent to the > >> new tarball bluez-firmware that I have downloaded from BlueZ's homepage and > >> installed, but the reality is that this dongle doesn't work anymore. > > >Use bluez-firmware and the bcm203x kernel driver for the 2.6 kernels. > > How do I use this driver? I have tried to load it with insmod and I get the following: > > EWS4:~/paquetes_rpm # insmod /lib/modules/2.6.4-52-smp/kernel/drivers/bluetooth/bcm203x.ko > insmod: error inserting '/lib/modules/2.6.4-52-smp/kernel/drivers/bluetooth/bcm203x.ko': -1 Unknown symbol in module > > At the same time the following lines appear in the /var/log/messages file: > > Oct 14 12:38:07 EWS4 kernel: bcm203x: Unknown symbol release_firmware > Oct 14 12:38:07 EWS4 kernel: bcm203x: Unknown symbol request_firmware Load the firmware_class kernel module and place the firmware files under /lib/firmware/ Regards Marcel ------------------------------------------------------- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users