* [Bluez-devel] dfutool - IBM X23 refuses to update ;)
@ 2005-10-21 16:16 Nils Faerber
2005-10-21 16:30 ` Nils Faerber
2005-10-21 16:30 ` Marcel Holtmann
0 siblings, 2 replies; 5+ messages in thread
From: Nils Faerber @ 2005-10-21 16:16 UTC (permalink / raw)
To: bluez-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hi all!
Some time ago I purchased an IBM X23 notebook (nice thing BTW) with
Bluetooth. The Bluetooth chip is, of course, a CSR one, labeled as ITSE.
IBM offers a Bluetooth firmware upgrade for it to help support of
multiple connections.
So I would like to upgrade my firmware using the dfutool. IBM's uprade
file can easily be unpacked and what you get is the, I guess, proper DFU
file for the upgrade.
Using the dfutool I can nicely backup my firmware to a file - works like
charm!
But when I try to flash the new firmware the dfutool waits a couple of
seconds at "switching device to dfu mode", then sais "Dowloading
firmware" without progress indication and then sais "Can't get status:
Broken pipe (32)".
Pity, so close but yet so far ;)
If it is of help I can provide the original and update firmware files.
Here is additonally what hciconfig tells me about my chip:
root@miu:~ # hciconfig hci0 revision
hci0: Type: USB
BD Address: 00:80:98:24:80:BE ACL MTU: 128:8 SCO MTU: 64:8
HCI 11.3
Chip version: BlueCore01b
SCO mapping: HCI
root@miu:~ # hciconfig hci0 version
hci0: Type: USB
BD Address: 00:80:98:24:80:BE ACL MTU: 128:8 SCO MTU: 64:8
HCI Ver: 1.1 (0x1) HCI Rev: 0x73 LMP Ver: 1.1 (0x1) LMP Subver: 0x73
Manufacturer: Cambridge Silicon Radio (10)
And this is the name of the new firmware file
ITSE_00003_07_IBM_BDC_Firmware128_Rev310.dfu
So, does anyone have an idea how to debug or even fix this?
If yes, I would be quite glad ;)
Cheers
nils faerber
- --
kernel concepts Tel: +49-271-771091-12
Dreisbachstr. 24 Fax: +49-271-771091-19
D-57250 Netphen Mob: +49-176-21024535
- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDWRRUJXeIURG1qHgRAj9zAJ44uxswEeiI7QGqOs/xTTHzZxWRbgCglEIE
bH8E26NDvBvH0gev1KSCMlc=
=XgsB
-----END PGP SIGNATURE-----
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [Bluez-devel] dfutool - IBM X23 refuses to update ;)
2005-10-21 16:16 [Bluez-devel] dfutool - IBM X23 refuses to update ;) Nils Faerber
@ 2005-10-21 16:30 ` Nils Faerber
2005-10-21 16:43 ` Marcel Holtmann
2005-10-21 16:30 ` Marcel Holtmann
1 sibling, 1 reply; 5+ messages in thread
From: Nils Faerber @ 2005-10-21 16:30 UTC (permalink / raw)
To: bluez-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Hmm... I just compared the original DFU and the upgrade DFU using the
verify option:
./dfutool verify ITSE_00003_07_IBM_BDC_Firmware128_Rev310.dfu
Filename ITSE_00003_07_IBM_BDC_Firmware128_Rev310.dfu
Filesize 338168
Checksum b589a143
DFU suffix 10 03 ff ff ff ff 00 01 55 46 44 10 43 a1 89 b5
idVendor ffff
idProduct ffff
bcdDevice 310
bcdDFU 1.0
ucDfuSignature DFU
bLength 16
dwCRC b589a143
Firmware type CSR-dfu1
Firmware check valid checksum
./dfutool verify org.dfu
Filename org.dfu
Filesize 320480
Checksum 8c89a52e
DFU suffix 15 01 10 03 bf 04 00 01 55 46 44 10 2e a5 89 8c
idVendor 04bf
idProduct 0310
bcdDevice 115
bcdDFU 1.0
ucDfuSignature DFU
bLength 16
dwCRC 8c89a52e
Firmware type CSR-dfu1
Firmware check valid checksum
Might the missing product and vendor ID be the problem with upgrade
file? Can/should I try to change those?
Cheers
nils faerber
- --
kernel concepts Tel: +49-271-771091-12
Dreisbachstr. 24 Fax: +49-271-771091-19
D-57250 Netphen Mob: +49-176-21024535
- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDWReOJXeIURG1qHgRAtC7AJ9iAvwadWMke5r0twPZ4G3ypUiUpQCdEPGa
wmpwY6FRUXWUpRh8Zopeh4A=
=cx8b
-----END PGP SIGNATURE-----
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-devel] dfutool - IBM X23 refuses to update ;)
2005-10-21 16:30 ` Nils Faerber
@ 2005-10-21 16:43 ` Marcel Holtmann
2005-10-21 16:56 ` Nils Faerber
0 siblings, 1 reply; 5+ messages in thread
From: Marcel Holtmann @ 2005-10-21 16:43 UTC (permalink / raw)
To: bluez-devel
Hi Nils,
> Hmm... I just compared the original DFU and the upgrade DFU using the
> verify option:
>
> ./dfutool verify ITSE_00003_07_IBM_BDC_Firmware128_Rev310.dfu
> Filename ITSE_00003_07_IBM_BDC_Firmware128_Rev310.dfu
> Filesize 338168
> Checksum b589a143
> DFU suffix 10 03 ff ff ff ff 00 01 55 46 44 10 43 a1 89 b5
> idVendor ffff
> idProduct ffff
> bcdDevice 310
> bcdDFU 1.0
> ucDfuSignature DFU
> bLength 16
> dwCRC b589a143
> Firmware type CSR-dfu1
> Firmware check valid checksum
>
> ./dfutool verify org.dfu
> Filename org.dfu
> Filesize 320480
> Checksum 8c89a52e
> DFU suffix 15 01 10 03 bf 04 00 01 55 46 44 10 2e a5 89 8c
> idVendor 04bf
> idProduct 0310
> bcdDevice 115
> bcdDFU 1.0
> ucDfuSignature DFU
> bLength 16
> dwCRC 8c89a52e
> Firmware type CSR-dfu1
> Firmware check valid checksum
>
>
> Might the missing product and vendor ID be the problem with upgrade
> file? Can/should I try to change those?
no, because dfutool simply ignores them.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-devel] dfutool - IBM X23 refuses to update ;)
2005-10-21 16:43 ` Marcel Holtmann
@ 2005-10-21 16:56 ` Nils Faerber
0 siblings, 0 replies; 5+ messages in thread
From: Nils Faerber @ 2005-10-21 16:56 UTC (permalink / raw)
To: bluez-devel
-----BEGIN PGP SIGNED MESSAGE-----
Hash: SHA1
Marcel Holtmann schrieb:
> Hi Nils,
Hi!
Too bad ... so I really have to install Windows to do this!?
Too bad too bad ;)
Thanks, anyway!
Cheers
nils
>>Hmm... I just compared the original DFU and the upgrade DFU using the
>>verify option:
>>
>>./dfutool verify ITSE_00003_07_IBM_BDC_Firmware128_Rev310.dfu
>>Filename ITSE_00003_07_IBM_BDC_Firmware128_Rev310.dfu
>>Filesize 338168
>>Checksum b589a143
>>DFU suffix 10 03 ff ff ff ff 00 01 55 46 44 10 43 a1 89 b5
>>idVendor ffff
>>idProduct ffff
>>bcdDevice 310
>>bcdDFU 1.0
>>ucDfuSignature DFU
>>bLength 16
>>dwCRC b589a143
>>Firmware type CSR-dfu1
>>Firmware check valid checksum
>>
>>./dfutool verify org.dfu
>>Filename org.dfu
>>Filesize 320480
>>Checksum 8c89a52e
>>DFU suffix 15 01 10 03 bf 04 00 01 55 46 44 10 2e a5 89 8c
>>idVendor 04bf
>>idProduct 0310
>>bcdDevice 115
>>bcdDFU 1.0
>>ucDfuSignature DFU
>>bLength 16
>>dwCRC 8c89a52e
>>Firmware type CSR-dfu1
>>Firmware check valid checksum
>>
>>
>>Might the missing product and vendor ID be the problem with upgrade
>>file? Can/should I try to change those?
>
>
> no, because dfutool simply ignores them.
>
> Regards
>
> Marcel
>
>
>
>
> -------------------------------------------------------
> This SF.Net email is sponsored by:
> Power Architecture Resource Center: Free content, downloads, discussions,
> and more. http://solutions.newsforge.com/ibmarch.tmpl
> _______________________________________________
> Bluez-devel mailing list
> Bluez-devel@lists.sourceforge.net
> https://lists.sourceforge.net/lists/listinfo/bluez-devel
Viele Grüße
nils faerber
- --
kernel concepts Tel: +49-271-771091-12
Dreisbachstr. 24 Fax: +49-271-771091-19
D-57250 Netphen Mob: +49-176-21024535
- --
-----BEGIN PGP SIGNATURE-----
Version: GnuPG v1.4.1 (GNU/Linux)
Comment: Using GnuPG with Thunderbird - http://enigmail.mozdev.org
iD8DBQFDWR3VJXeIURG1qHgRAsiZAKCe50SQCTqK7N733LaAuyaOjhyG4ACeP33m
NR1erickKwba7mi0aHURGAg=
=6FB8
-----END PGP SIGNATURE-----
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
* Re: [Bluez-devel] dfutool - IBM X23 refuses to update ;)
2005-10-21 16:16 [Bluez-devel] dfutool - IBM X23 refuses to update ;) Nils Faerber
2005-10-21 16:30 ` Nils Faerber
@ 2005-10-21 16:30 ` Marcel Holtmann
1 sibling, 0 replies; 5+ messages in thread
From: Marcel Holtmann @ 2005-10-21 16:30 UTC (permalink / raw)
To: bluez-devel
Hi Nils,
> Some time ago I purchased an IBM X23 notebook (nice thing BTW) with
> Bluetooth. The Bluetooth chip is, of course, a CSR one, labeled as ITSE.
> IBM offers a Bluetooth firmware upgrade for it to help support of
> multiple connections.
> So I would like to upgrade my firmware using the dfutool. IBM's uprade
> file can easily be unpacked and what you get is the, I guess, proper DFU
> file for the upgrade.
you can use "verify" to see if the DFU file is at least valid.
> Using the dfutool I can nicely backup my firmware to a file - works like
> charm!
> But when I try to flash the new firmware the dfutool waits a couple of
> seconds at "switching device to dfu mode", then sais "Dowloading
> firmware" without progress indication and then sais "Can't get status:
> Broken pipe (32)".
The dfutool is not perfect. I only tested it with a small bunch of
devices and most of them were BlueCore02 or later.
> If it is of help I can provide the original and update firmware files.
> Here is additonally what hciconfig tells me about my chip:
>
> root@miu:~ # hciconfig hci0 revision
> hci0: Type: USB
> BD Address: 00:80:98:24:80:BE ACL MTU: 128:8 SCO MTU: 64:8
> HCI 11.3
> Chip version: BlueCore01b
> SCO mapping: HCI
This is a very old firmware and maybe the boot loader on the chip is
even older. Maybe it is broken and need some special tweaks to make it
working. Sometimes increasing the timeouts inside the code might help,
but you can also render your device useless.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by:
Power Architecture Resource Center: Free content, downloads, discussions,
and more. http://solutions.newsforge.com/ibmarch.tmpl
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
^ permalink raw reply [flat|nested] 5+ messages in thread
end of thread, other threads:[~2005-10-21 16:56 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2005-10-21 16:16 [Bluez-devel] dfutool - IBM X23 refuses to update ;) Nils Faerber
2005-10-21 16:30 ` Nils Faerber
2005-10-21 16:43 ` Marcel Holtmann
2005-10-21 16:56 ` Nils Faerber
2005-10-21 16:30 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).