Re: [Bluez-users] driver support for sitecom cn-510 bluetooth usb Adapter

[Marcel Holtmann <marcel@holtmann.org>]

Hi Philipp,

> > > I've trouble getting an usb bluetooth adapter getting to work. When I
> > > plug the devvice into my computer it somehow get's recognized, because
> > > the modul hci_usb automatically get's loaded. However, I see nothing
> > > about that in the kernel log and "hcitool dev" doesn't list any devices.
> > > Any ideas, how I could get this thing to work? I've, that the sitecom
> > > cn-500 adapter is supported, but I didn't find anything about the cn-510
> > > on the internet.
> >
> > check with "hciconfig -a" and look at /proc/bus/usb/devices.
> hciconfig -a says: 
> hci0:   Type: USB
>         BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0
>         DOWN 
>         RX bytes:0 acl:0 sco:0 events:0 errors:0
>         TX bytes:0 acl:0 sco:0 commands:0 errors:0

then use "hciconfig hci0 up" or start hcid.

Regards

Marcel




-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users