From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-users] UART bluetooth chip problem From: Marcel Holtmann To: bluez-users@lists.sourceforge.net In-Reply-To: <7846f1440512071711x6c56c8er24edb8e3a8815ab9@mail.gmail.com> References: <7846f1440512071711x6c56c8er24edb8e3a8815ab9@mail.gmail.com> Content-Type: text/plain Message-Id: <1134020677.3752.61.camel@blade> Mime-Version: 1.0 Sender: bluez-users-admin@lists.sourceforge.net Errors-To: bluez-users-admin@lists.sourceforge.net Reply-To: bluez-users@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ users List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 08 Dec 2005 06:44:37 +0100 Hi Arthur, > I am currently using a bluetooth chip by bluegiga (www.bluegiga.com), > called WRAP THOR 2022-1-B2B. > I set the configurations on the chip so that it is running at 115200 > baud rate. After, I tried doing the following: > > # hcid > # hciattach -s 115200 /dev/ttyS1 any 115200 flow > # hciconfig > hci0: Type: UART > BD Address: 00:00:00:00:00:00 ACL MTU: 0:0 SCO MTU: 0:0 > DOWN INIT RUNNING > RX bytes:0 acl:0 sco:0 events:0 errors:0 > TX bytes:4 acl:0 sco:0 commands:1 errors:0 > # hciconfig hci0 up > Can't init device hci0: Connection timed out (145) > > I checked and error code 145 indeed means Connection timed out on my > header files (errno.h). > What might be wrong? first, you should ask you module manufacturer what chip they are using and then what transport they use. Regards Marcel ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users