[Bluez-users] repairing required after each dialup

[Bluez-users] repairing required after each dialup

[Karl H. Beckers]

Hi all,

is there somebody around who uses a SE k700i for dialup?

I have this effect where I can only dial if I do:

- remove computer from list in mobile phone
- rfcomm connect /dev/rfcomm0 .... 1
	(repairing here)
- ifup ppp0

After every disconnect (pppd drops the connection of I press CTRL-C with
rfcomm) I need to repeat this or else will get "Connection refused" from
rfcomm connect (and it took me a while to find this workaround).

Can anybody comment on whether this is a known issue with either rfcomm
or the k700i, if so with which, and whether there's a fix (fw upgrade
perhaps).

Or are there any other things I should look at?

TIA,

Karl.



-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users

Re: [Bluez-users] repairing required after each dialup

[Marcel Holtmann]

Hi Karl,

> is there somebody around who uses a SE k700i for dialup?
> 
> I have this effect where I can only dial if I do:
> 
> - remove computer from list in mobile phone
> - rfcomm connect /dev/rfcomm0 .... 1
> 	(repairing here)
> - ifup ppp0
> 
> After every disconnect (pppd drops the connection of I press CTRL-C with
> rfcomm) I need to repeat this or else will get "Connection refused" from
> rfcomm connect (and it took me a while to find this workaround).
> 
> Can anybody comment on whether this is a known issue with either rfcomm
> or the k700i, if so with which, and whether there's a fix (fw upgrade
> perhaps).
> 
> Or are there any other things I should look at?

show us the output of "hcidump -X -V" for this problem.

Regards

Marcel




-------------------------------------------------------
This SF.net email is sponsored by: Splunk Inc. Do you grep through log files
for problems?  Stop!  Download the new AJAX search engine that makes
searching your log files as easy as surfing the  web.  DOWNLOAD SPLUNK!
http://ads.osdn.com/?ad_id=7637&alloc_id=16865&op=click
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users