From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: [Bluez-devel] Re: PAN with DLink Access Point DBT-900AP From: Marcel Holtmann To: bluez-devel@lists.sourceforge.net In-Reply-To: <43D8A247.8050306@3max.de> References: <43D8A247.8050306@3max.de> Content-Type: text/plain Message-Id: <1138274481.5901.33.camel@localhost> Mime-Version: 1.0 Sender: bluez-devel-admin@lists.sourceforge.net Errors-To: bluez-devel-admin@lists.sourceforge.net Reply-To: bluez-devel@lists.sourceforge.net List-Unsubscribe: , List-Id: BlueZ development List-Post: List-Help: List-Subscribe: , List-Archive: Date: Thu, 26 Jan 2006 12:21:21 +0100 Hi Maximilian, > I think now it's a PIN problem. > > as i can see from hcidump > < HCI Command: Create Connection (0x01|0x0005) plen 13 > bdaddr 00:0D:88:9F:38:A5 ptype 0xcc18 rswitch 0x01 clkoffset 0x0000 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 > > HCI Event: Command Status (0x0f) plen 4 > > HCI Event: Role Change (0x12) plen 8 > > HCI Event: PIN Code Request (0x16) plen 6 > > the establishment of the connection requires a PIN, but no pin_helper or > anything else is opened. What do i have to change? make sure that hcid is running and then check the syslog messages. Regards Marcel ------------------------------------------------------- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnk&kid=103432&bid=230486&dat=121642 _______________________________________________ Bluez-devel mailing list Bluez-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-devel