From: Per Thomas Jahr <perja@extern.uio.no>
To: BlueZ users <bluez-users@lists.sourceforge.net>
Subject: Re: [Bluez-users] Problems with security block
Date: Wed, 04 Oct 2006 22:13:41 +0200 [thread overview]
Message-ID: <1159992821.19347.32.camel@localhost.localdomain> (raw)
In-Reply-To: <1159992339.8692.0.camel@localhost>
[-- Attachment #1: Type: text/plain, Size: 192 bytes --]
ons, 04,.10.2006 kl. 22.05 +0200, skrev Marcel Holtmann:
> show us the output of "hcidump -X -V" for both attempts.
That was quick :-)
Outputs for both attempts are attached.
--
Per Thomas
[-- Attachment #2: hcidump-1 --]
[-- Type: text/plain, Size: 12050 bytes --]
HCI sniffer - Bluetooth packet analyzer ver 1.18
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:16:B8:8D:EC:2B class 0x5a0204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:16:B8:8D:EC:2B role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 6 bdaddr 00:16:B8:8D:EC:2B type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 6 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 6 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
0000: 06 00 18 cc ....
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x0c ncmd 1
Error: Command Disallowed
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x17 ncmd 1
Error: Pairing Not Allowed
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 06 00 05 ...
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:16:B8:8D:EC:2B name 'perja K800i'
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1500
< ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 6 flags 0x02 dlen 50
L2CAP(d): cid 0x0040 len 46 [psm 1]
SDP SSA Req: tid 0x1 len 0x29
pat uuid-128 c111b111-1111-111a-e113-1111df117112
max 1500
aid(s) 0x0000 (SrvRecHndl) 0x0001 (SrvClassIDList) 0x0002 (SrvRecState) 0x0003 (SrvID) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 6 flags 0x02 dlen 112
L2CAP(d): cid 0x0040 len 108 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x67
count 100
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-128 c111b111-1111-111a-e113-1111df117112 >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
record #1
aid 0x0000 (SrvRecHndl)
uint 0x10003
aid 0x0001 (SrvClassIDList)
< uuid-128 c111b111-1111-111a-e113-1111df117112 >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 6 reason 0x13
Reason: Remote User Teminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:16:B8:8D:EC:2B class 0x5a0204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:16:B8:8D:EC:2B role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 7 bdaddr 00:16:B8:8D:EC:2B type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 7 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 7
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 7 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
0000: 07 00 18 cc ....
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x0c ncmd 1
Error: Command Disallowed
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x17 ncmd 1
Error: Pairing Not Allowed
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 07 00 05 ...
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:16:B8:8D:EC:2B name 'perja K800i'
> ACL data: handle 7 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< ACL data: handle 7 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> ACL data: handle 7 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1012
< ACL data: handle 7 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 7 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
> ACL data: handle 7 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> ACL data: handle 7 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 0 ack_timer 0
frame_size 1007 max_retrans 0 credits 7
< ACL data: handle 7 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): PN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 frame_type 0 credit_flow 14 pri 0 ack_timer 0
frame_size 1007 max_retrans 0 credits 7
> ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x59
< ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 7 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC CMD: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> ACL data: handle 7 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 1 ilen 0 fcs 0x86 credits 13
> ACL data: handle 7 flags 0x02 dlen 13
L2CAP(d): cid 0x0040 len 9 [psm 3]
RFCOMM(s): MSC CMD: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 1 len 10
< ACL data: handle 7 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): MSC RSP: cr 0 dlci 0 pf 0 ilen 4 fcs 0xaa mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 1 b3 0 len 0
> ACL data: handle 7 flags 0x02 dlen 13
L2CAP(d): cid 0x0040 len 9 [psm 3]
RFCOMM(s): MSC RSP: cr 1 dlci 0 pf 0 ilen 4 fcs 0x70 mcc_len 2
dlci 2 fc 0 rtc 1 rtr 1 ic 0 dv 1 b1 1 b2 0 b3 1 len 10
< ACL data: handle 7 flags 0x02 dlen 9
L2CAP(d): cid 0x0040 len 5 [psm 3]
RFCOMM(d): UIH: cr 0 dlci 2 pf 1 ilen 0 fcs 0x5c credits 33
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> ACL data: handle 7 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): RPN CMD: cr 1 dlci 0 pf 0 ilen 3 fcs 0x70 mcc_len 1
dlci 2 br 112 db 0 sb 0 p 0 pt 3 xi 1 xo 1
rtri 1 rtro 1 rtci 0 rtco 1 xon 3 xoff 0 pm 0xaa07
< ACL data: handle 7 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): RPN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 br 7 db 3 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19 pm 0x3f7f
> ACL data: handle 7 flags 0x02 dlen 12
L2CAP(d): cid 0x0040 len 8 [psm 3]
RFCOMM(s): RPN CMD: cr 1 dlci 0 pf 0 ilen 3 fcs 0x70 mcc_len 1
dlci 2 br 112 db 0 sb 0 p 0 pt 0 xi 1 xo 0
rtri 0 rtro 0 rtci 1 rtco 0 xon 19 xoff 127 pm 0xaa3f
< ACL data: handle 7 flags 0x02 dlen 18
L2CAP(d): cid 0x0040 len 14 [psm 3]
RFCOMM(s): RPN RSP: cr 0 dlci 0 pf 0 ilen 10 fcs 0xaa mcc_len 8
dlci 2 br 7 db 3 sb 0 p 0 pt 0 xi 0 xo 0
rtri 0 rtro 0 rtci 0 rtco 0 xon 17 xoff 19 pm 0x3f7f
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:16:B8:8D:EC:2B name 'perja K800i'
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> ACL data: handle 7 flags 0x02 dlen 14
L2CAP(d): cid 0x0040 len 10 [psm 3]
RFCOMM(d): UIH: cr 1 dlci 2 pf 0 ilen 5 fcs 0x9a
0000: 00 03 65 6e 64 ..end
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
> ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 2 pf 1 ilen 0 fcs 0xb8
< ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 2 pf 1 ilen 0 fcs 0x92
< ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 0 dlci 0 pf 1 ilen 0 fcs 0x9c
< ACL data: handle 7 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:16:B8:8D:EC:2B name 'perja K800i'
> ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
> ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 0 dlci 0 pf 1 ilen 0 fcs 0xb6
> ACL data: handle 7 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 7 reason 0x13
Reason: Remote User Teminated Connection
[-- Attachment #3: hcidump-2 --]
[-- Type: text/plain, Size: 8069 bytes --]
HCI sniffer - Bluetooth packet analyzer ver 1.18
device: hci0 snap_len: 1028 filter: 0xffffffff
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:16:B8:8D:EC:2B class 0x5a0204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:16:B8:8D:EC:2B role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 6 bdaddr 00:16:B8:8D:EC:2B type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 6 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 6
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 6 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
0000: 06 00 18 cc ....
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x0c ncmd 1
Error: Command Disallowed
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 06 00 05 ...
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x17 ncmd 1
Error: Pairing Not Allowed
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:16:B8:8D:EC:2B name 'perja K800i'
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 1 scid 0x0040
< ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> ACL data: handle 6 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1500
< ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 0
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> ACL data: handle 6 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 6 flags 0x02 dlen 50
L2CAP(d): cid 0x0040 len 46 [psm 1]
SDP SSA Req: tid 0x1 len 0x29
pat uuid-128 c111b111-1111-111a-e113-1111df117112
max 1500
aid(s) 0x0000 (SrvRecHndl) 0x0001 (SrvClassIDList) 0x0002 (SrvRecState) 0x0003 (SrvID) 0x0004 (ProtocolDescList)
cont 00
< ACL data: handle 6 flags 0x02 dlen 112
L2CAP(d): cid 0x0040 len 108 [psm 1]
SDP SSA Rsp: tid 0x1 len 0x67
count 100
record #0
aid 0x0000 (SrvRecHndl)
uint 0x10002
aid 0x0001 (SrvClassIDList)
< uuid-128 c111b111-1111-111a-e113-1111df117112 >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
record #1
aid 0x0000 (SrvRecHndl)
uint 0x10003
aid 0x0001 (SrvClassIDList)
< uuid-128 c111b111-1111-111a-e113-1111df117112 >
aid 0x0004 (ProtocolDescList)
< < uuid-16 0x0100 (L2CAP) > <
uuid-16 0x0003 (RFCOMM) uint 0x1 > >
cont 00
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 6 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 6
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 6 reason 0x13
Reason: Remote User Teminated Connection
> HCI Event: Connect Request (0x04) plen 10
bdaddr 00:16:B8:8D:EC:2B class 0x5a0204 type ACL
< HCI Command: Accept Connection Request (0x01|0x0009) plen 7
bdaddr 00:16:B8:8D:EC:2B role 0x01
Role: Slave
> HCI Event: Command Status (0x0f) plen 4
Accept Connection Request (0x01|0x0009) status 0x00 ncmd 1
> HCI Event: Connect Complete (0x03) plen 11
status 0x00 handle 7 bdaddr 00:16:B8:8D:EC:2B type ACL encrypt 0x00
< HCI Command: Write Link Policy Settings (0x02|0x000d) plen 4
handle 7 policy 0x0f
Link policy: RSWITCH HOLD SNIFF PARK
> HCI Event: Command Complete (0x0e) plen 6
Write Link Policy Settings (0x02|0x000d) ncmd 1
status 0x00 handle 7
< HCI Command: Change Connection Packet Type (0x01|0x000f) plen 4
handle 7 ptype 0xcc18
Packet type: DM1 DM3 DM5 DH1 DH3 DH5
0000: 07 00 18 cc ....
> HCI Event: Command Status (0x0f) plen 4
Change Connection Packet Type (0x01|0x000f) status 0x0c ncmd 1
Error: Command Disallowed
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x00 ncmd 1
< HCI Command: Remote Name Request (0x01|0x0019) plen 10
bdaddr 00:16:B8:8D:EC:2B clkoffset 0x0000
> HCI Event: Command Status (0x0f) plen 4
Remote Name Request (0x01|0x0019) status 0x17 ncmd 1
Error: Pairing Not Allowed
> HCI Event: Max Slots Change (0x1b) plen 3
0000: 07 00 05 ...
> HCI Event: Remote Name Req Complete (0x07) plen 255
status 0x00 bdaddr 00:16:B8:8D:EC:2B name 'perja K800i'
> ACL data: handle 7 flags 0x02 dlen 12
L2CAP(s): Connect req: psm 3 scid 0x0040
< ACL data: handle 7 flags 0x02 dlen 16
L2CAP(s): Connect rsp: dcid 0x0040 scid 0x0040 result 0 status 0
Connection successful
> ACL data: handle 7 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1012
< ACL data: handle 7 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
< ACL data: handle 7 flags 0x02 dlen 16
L2CAP(s): Config req: dcid 0x0040 flags 0x00 clen 4
MTU 1024
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> ACL data: handle 7 flags 0x02 dlen 14
L2CAP(s): Config rsp: scid 0x0040 flags 0x00 result 0 clen 0
Success
> ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): SABM: cr 1 dlci 0 pf 1 ilen 0 fcs 0x1c
< ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> ACL data: handle 7 flags 0x02 dlen 19
L2CAP(d): cid 0x0040 len 15 [psm 3]
RFCOMM(s): PN CMD: cr 1 dlci 0 pf 0 ilen 10 fcs 0x70 mcc_len 8
dlci 2 frame_type 0 credit_flow 15 pri 0 ack_timer 0
frame_size 1007 max_retrans 0 credits 7
< ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DM: cr 1 dlci 2 pf 1 ilen 0 fcs 0x73
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): DISC: cr 1 dlci 0 pf 1 ilen 0 fcs 0xfd
< ACL data: handle 7 flags 0x02 dlen 8
L2CAP(d): cid 0x0040 len 4 [psm 3]
RFCOMM(s): UA: cr 1 dlci 0 pf 1 ilen 0 fcs 0xd7
> ACL data: handle 7 flags 0x02 dlen 12
L2CAP(s): Disconn req: dcid 0x0040 scid 0x0040
< ACL data: handle 7 flags 0x02 dlen 12
L2CAP(s): Disconn rsp: dcid 0x0040 scid 0x0040
> HCI Event: Number of Completed Packets (0x13) plen 5
handle 7
> HCI Event: Disconn Complete (0x05) plen 4
status 0x00 handle 7 reason 0x13
Reason: Remote User Teminated Connection
[-- Attachment #4: Type: text/plain, Size: 348 bytes --]
-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys -- and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
[-- Attachment #5: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
next prev parent reply other threads:[~2006-10-04 20:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2006-10-04 20:00 [Bluez-users] Problems with security block Per Thomas Jahr
2006-10-04 20:05 ` Marcel Holtmann
2006-10-04 20:13 ` Per Thomas Jahr [this message]
2006-10-04 20:20 ` Marcel Holtmann
2006-10-05 6:49 ` Per Thomas Jahr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1159992821.19347.32.camel@localhost.localdomain \
--to=perja@extern.uio.no \
--cc=bluez-users@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox