Re: [Bluez-devel] sdpd in polling loop on disconnect

[Marcel Holtmann <marcel@holtmann.org>]

Hi Frank,

> Is there anyone else here who has seen sdpd run away in a tight poll()
> loop when a connected device drops the connection? I can more or less
> reliably get sdpd go mad poll()ing and hogging the CPU by walking out of
> range, turning off Bluetooth on the (ngage) phone, sending crap to the
> serial port service on the phone, etc.
> 
> An almost surefire way to get this behaviour to occur goes as follows:
> 
> (assumption: paired phone, serial port bound to /dev/rfcomm3)
> 
> cat /dev/rfcomm3 (phone wakes up and wants OK)
> echo blah > /dev/rfcomm3 (ditto)
> usually sdpd will now start eating the CPU. Attaching gdb does not show
> much more than that it is looping in g_main_loop_run:
> 
> Program received signal SIGUSR2, User defined signal 2.
> 0x00e1a402 in __kernel_vsyscall ()
> (gdb) bt
> #0  0x00e1a402 in __kernel_vsyscall ()
> #1  0x008c2cfb in poll () from /lib/libc.so.6
> #2  0x0046b453 in ?? () from /lib/libglib-2.0.so.0
> #3  0x0046b7c9 in g_main_loop_run () from /lib/libglib-2.0.so.0
> #4  0x80001800 in main (argc=1, argv=Cannot access memory at address 0x7
> ) at main.c:147
> 
> It loops in g_main_context_check(), repeatedly calling
> g_io_channel_get_buffer_condition() as if it still believes there is
> some data left to be read. I will look further into this but I'd like to
> hear whether I'm the only one with these problems...

if this is bluez-utils-3.9 you might wanna try to compile it with
--enable-glib to use the system Glib. It might be possible that our
eglib has some kind of bad. In case of using the Glib system library, I
think you discovered a real bug in sdpd. Do you see the same issue if
you don't start sdpd and use hcid -s instead.

Regards

Marcel



-------------------------------------------------------------------------
Take Surveys. Earn Cash. Influence the Future of IT
Join SourceForge.net's Techsay panel and you'll get the chance to share your
opinions on IT & business topics through brief surveys-and earn cash
http://www.techsay.com/default.php?page=join.php&p=sourceforge&CID=DEVDEV
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel