Re: [Bluez-devel] LMX9830 driver

[Marcel Holtmann <marcel@holtmann.org>]

Hi David,

> We have included a National LMX9830 module in a new design. The 
> communication between the chip and the microprocessor is via UART and we 
> have also connected the audio channels of the chip to the processor, so 
> that we can use the SCO link.
> 
> It's the first time we use bluetooth modules in our designs, and so, we 
> are open to any kind of suggestion on how to work on this.
> 
> At first sight, it seems that we should use the UART(H4) driver, but we 
> are not really sure if the commands to communicate to the chip are 
> standard or not. I think that we will probably need to develop some kind 
> of a driver.

unless you use some vendor specific deep-sleep things, the H4 driver
should be fine. However you might need to adapt hciattach for the module
initialization.

Regards

Marcel



-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel