From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Frederic Dalleau To: BlueZ users In-Reply-To: <200707191654.29240.jbarnes@virtuousgeek.org> References: <200707191654.29240.jbarnes@virtuousgeek.org> Date: Fri, 20 Jul 2007 10:13:27 +0200 Message-Id: <1184919207.880.5.camel@ubuntu.mpl.access-company.com> Mime-Version: 1.0 Subject: Re: [Bluez-users] Trouble with basic a2dp setup Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Are you paired? Put your headset discoverable and retry. The pincode dialog should appear, if not, make sure you have bluez-gnome. Frederic On Thu, 2007-07-19 at 16:54 -0700, Jesse Barnes wrote: > I recently picked up a Jabra BT620s headset for use with my Treo, and it > works great. So I figured it would be nice if it worked with my > bluetooth capable Linux laptops as well. Unfortunately, configuring it > to actually play audio on demand hasn't been as easy as I'd expected. > > I followed the instructions at the bluetooth-alsa site, .a2dprc > attached, and .asoundrc looks like this: > pcm.a2dpd { > type a2dpd > } > > hcitool scan shows my device address if its in associate mode, and I can > ping it with l2ping, but when I play audio after starting the a2dpd > daemon, I get a lot of debug output, some of which look like error > messages: > > ... > A2DPD[16:42:59.501]: init_ipc: Selected IPC: unix, addr=127.0.0.1, > bcst=127.0.0.255, port=21453 > A2DPD[16:42:59.501]: make_daemon_process: a2dpd [Jul 19 2007 14:19:57] > starting ... > A2DPD[16:42:59.502]: main: (errno=13:Permission denied)a2dpd > addr=00:13:17:71:44:AA timer=0 us [Jul 19 2007 14:37:05] > A2DPD[16:42:59.503]: a2dpd_signal_init: Getting on DBUS > A2DPD[16:42:59.509]: a2dpd_signal_init: Installing watch > A2DPD[16:42:59.510]: add_dbus_watch: Added watch 0 0x859b838 disabled > A2DPD[16:42:59.510]: add_dbus_watch: Added watch 1 0x859b860 enabled > A2DPD[16:42:59.511]: a2dpd_signal_init: Registering object > path: /com/access/a2dpd > A2DPD[16:42:59.511]: a2dpd_signal_init: Acquiring service: > com.access.a2dpd > A2DPD[16:42:59.513]: a2dpd_signal_init: OK > A2DPD[16:42:59.513]: a2dpd_register_sdp: Start > A2DPD[16:42:59.514]: add_avrtg: > A2DPD[16:42:59.516]: add_a2source: > A2DPD[16:42:59.516]: a2dpd_register_sdp: OK > A2DPD[16:42:59.517]: main_loop: > A2DPD[16:42:59.517]: make_server_socket: > A2DPD[16:42:59.518]: a2dp_make_listen_socket: (errno=13:Permission > denied)Cannot bind socket 6 for psm 25 > A2DPD[16:42:59.518]: main_loop: *** Cannot get AVDTP socket, incoming > AVDTP connections are impossible *** > A2DPD[16:42:59.519]: a2dpd_signal_state: Started 00:13:17:71:44:AA > A2DPD[16:42:59.520]: bta2dpdevicenew: > A2DPD[16:42:59.520]: a2dpd_signal_address_changed: 00:13:17:71:44:AA > A2DPD[16:42:59.521]: a2dpd_signal_set_socket: Signal socket set to 6 > A2DPD[16:42:59.524]: a2dpd_signal_state: Disconnected > A2DPD[16:42:59.525]: a2dp_alloc: > A2DPD[16:42:59.525]: a2dp_alloc: (a2dp = 0x859ef88) > ... > A2DPD[16:43:08.561]: get_avdtp_psm: Record > A2DPD[16:43:08.561]: get_avdtp_psm: Service Search OK > A2DPD[16:43:08.593]: get_avdtp_psm: Checking non spec audio > A2DPD[16:43:08.593]: a2dp_state_machine: Found psm 25 > A2DPD[16:43:08.593]: a2dp_state_machine: State > AVDTP_STATEX_CTL_CONNECTING > A2DPD[16:43:08.593]: a2dp_state_machine: Socket is 9 > A2DPD[16:43:08.593]: a2dp_state_machine: (errno=115:Operation now in > progress)State AVDTP_STATEX_CTL_CONNECTING_WAIT > A2DPD[16:43:08.597]: stream_client_send_pointer_resp: (errno=32:Broken > pipe)Error while sending data > A2DPD[16:43:08.597]: disconnect_client: > A2DPD[16:43:08.597]: pollfd_cb_clients: Client 0: Error detected (err=1, > toc=1, err=0, hup=1) > A2DPD[16:43:08.598]: disconnect_client: > A2DPD[16:43:08.628]: a2dp_state_machine: (errno=111:Connection > refused)CTL connection failed > A2DPD[16:43:08.628]: a2dp_state_machine: State > AVDTP_STATEX_DISCONNECTING > A2DPD[16:43:08.678]: a2dp_disconnect: > A2DPD[16:43:08.678]: a2dp_stream_stop: Closing stream socket -1 > ... > > I'm running the a2dpd daemon as a normal user, as recommended... > > Hopefully there's something simple I'm missing here... maybe one day > this stuff will come standard with Fedora installations and I won't have > to do any configuration. > > Thanks, > Jesse > ------------------------------------------------------------------------- > This SF.net email is sponsored by: Microsoft > Defy all challenges. Microsoft(R) Visual Studio 2005. > http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ > _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users ------------------------------------------------------------------------- This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/ _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users