* [Bluez-users] Usage of network service
@ 2007-12-10 15:08 Míla Kuchta
2007-12-16 22:43 ` Míla Kuchta
0 siblings, 1 reply; 2+ messages in thread
From: Míla Kuchta @ 2007-12-10 15:08 UTC (permalink / raw)
To: bluez-users
[-- Attachment #1.1: Type: text/plain, Size: 543 bytes --]
Hello,
I've been using bluetooth PAN using pand daemon. Pand runs as a daemon
and used to create network interface on demand calling dev-up and
dev-down script which in turn runs ifup and ifdown to setup the device.
In newer version of bluez, it's preffered to use network service, but I
haven't found any documentation describing the process of creating and
setting up the device.
It is right that network service creates device and calls upon them
ifup/ifdown or does some dbus (HAL, NetworkManager) magic?
Regards
Mila
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 277 bytes --]
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services for
just about anything Open Source.
http://sourceforge.net/services/buy/index.php
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
* Re: [Bluez-users] Usage of network service
2007-12-10 15:08 [Bluez-users] Usage of network service Míla Kuchta
@ 2007-12-16 22:43 ` Míla Kuchta
0 siblings, 0 replies; 2+ messages in thread
From: Míla Kuchta @ 2007-12-16 22:43 UTC (permalink / raw)
To: BlueZ users
[-- Attachment #1.1: Type: text/plain, Size: 1159 bytes --]
I'm quite suprised that no one is using PAN network service...
On Po, 2007-12-10 at 16:08 +0100, Míla Kuchta wrote:
> Hello,
>
> I've been using bluetooth PAN using pand daemon. Pand runs as a daemon
> and used to create network interface on demand calling dev-up and
> dev-down script which in turn runs ifup and ifdown to setup the device.
>
> In newer version of bluez, it's preffered to use network service, but I
> haven't found any documentation describing the process of creating and
> setting up the device.
>
> It is right that network service creates device and calls upon them
> ifup/ifdown or does some dbus (HAL, NetworkManager) magic?
>
> Regards
>
> Mila
> -------------------------------------------------------------------------
> SF.Net email is sponsored by:
> Check out the new SourceForge.net Marketplace.
> It's the best place to buy or sell services for
> just about anything Open Source.
> http://sourceforge.net/services/buy/index.php
> _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users
[-- Attachment #1.2: This is a digitally signed message part --]
[-- Type: application/pgp-signature, Size: 189 bytes --]
[-- Attachment #2: Type: text/plain, Size: 308 bytes --]
-------------------------------------------------------------------------
SF.Net email is sponsored by:
Check out the new SourceForge.net Marketplace.
It's the best place to buy or sell services
for just about anything Open Source.
http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace
[-- Attachment #3: Type: text/plain, Size: 164 bytes --]
_______________________________________________
Bluez-users mailing list
Bluez-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-users
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2007-12-16 22:43 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2007-12-10 15:08 [Bluez-users] Usage of network service Míla Kuchta
2007-12-16 22:43 ` Míla Kuchta
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).