From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Marcel Holtmann To: BlueZ users In-Reply-To: References: <1215278356.4349.19.camel@californication> Date: Sun, 06 Jul 2008 13:00:02 +0200 Message-Id: <1215342002.7112.10.camel@californication> Mime-Version: 1.0 Subject: Re: [Bluez-users] Override default inquiry mode? Reply-To: BlueZ users List-Id: BlueZ users List-Unsubscribe: , List-Archive: List-Post: List-Help: List-Subscribe: , Content-Type: text/plain; charset="us-ascii" Sender: bluez-users-bounces@lists.sourceforge.net Errors-To: bluez-users-bounces@lists.sourceforge.net Hi Norbert, > >> I have got one of those tiny bluetooth USB adapters > >> (http://www.anycom.com/products/bluetooth_it_pc_accessoires/?id=102&group_id=3, > >> Broadcom chipset) and want to use it on my EEE PC. However, it does not work as > >> I hoped. > >> > >> The adapter only works after setting the inquiry mode from RSSI/Extended to > >> standard mode using > >> hciconfig hcio reset > >> hciconfig hci0 inqmode 0 > >> > >> Is there any way to tell the bluetooth stack (i.e. in one of its config files) > >> to always use the standard mode for this adapter, or even for all adapters? > > > > what is your problem with using a better inquiry mode? We haven't had > > any problem with this in a long long time. Your application might be > > broken actually if it can't deal with more advanced inquiry modes. > > The problem is notwith my application but with hciconfig and hcitool: > > asus-931342168:/root> hciconfig -a > hci0: Type: USB > BD Address: 00:0A:3A:82:06:80 ACL MTU: 1021:8 SCO MTU: 64:1 > UP RUNNING > RX bytes:163 acl:0 sco:0 events:19 errors:0 > TX bytes:564 acl:0 sco:0 commands:19 errors:0 > Features: 0xff 0xff 0x8f 0xfe 0x9b 0xff 0x79 0x83 > Packet type: DM1 DM3 DM5 DH1 DH3 DH5 HV1 HV2 HV3 > Link policy: RSWITCH HOLD SNIFF PARK > Link mode: SLAVE ACCEPT > Can't read local name on hci0: Input/output error (5) > asus-931342168:/root> hcitool scan > Scanning ... > Inquiry failed: Connection timed out > > I guess it is a problem with the bluetooth adapter's firmware. > > > However hcid.conf should have a inqmode setting. > > I'll try. Is there a hcid.conf reference? man hcid.conf does not show a > inqmode setting. you might have to load hci_usb driver with reset=1 module parameter. Regards Marcel ------------------------------------------------------------------------- Sponsored by: SourceForge.net Community Choice Awards: VOTE NOW! Studies have shown that voting for your favorite open source project, along with a healthy diet, reduces your potential for chronic lameness and boredom. Vote Now at http://www.sourceforge.net/community/cca08 _______________________________________________ Bluez-users mailing list Bluez-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bluez-users