From: Bing Zhao <bzhao@marvell.com>
To: linux-bluetooth@vger.kernel.org
Cc: Bing Zhao <bzhao@marvell.com>, Amitkumar Karwar <akarwar@marvell.com>
Subject: [PATCH v2] Bluetooth: Enable auto sleep mode for btmrvl driver
Date: Wed, 30 Sep 2009 11:18:30 -0700 [thread overview]
Message-ID: <1254334710-1811-1-git-send-email-bzhao@marvell.com> (raw)
From: Amitkumar Karwar <akarwar@marvell.com>
The auto sleep mode for btmrvl driver is not enabled by default.
This patch enables auto sleep mode when card is probed.
Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
---
drivers/bluetooth/btmrvl_drv.h | 1 +
drivers/bluetooth/btmrvl_main.c | 55 +++++++++++++++++++++++---------------
drivers/bluetooth/btmrvl_sdio.c | 2 +
3 files changed, 36 insertions(+), 22 deletions(-)
diff --git a/drivers/bluetooth/btmrvl_drv.h b/drivers/bluetooth/btmrvl_drv.h
index 411c7a7..523d197 100644
--- a/drivers/bluetooth/btmrvl_drv.h
+++ b/drivers/bluetooth/btmrvl_drv.h
@@ -131,6 +131,7 @@ void btmrvl_check_evtpkt(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_process_event(struct btmrvl_private *priv, struct sk_buff *skb);
int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd);
+int btmrvl_enable_ps(struct btmrvl_private *priv);
int btmrvl_prepare_command(struct btmrvl_private *priv);
#ifdef CONFIG_DEBUG_FS
diff --git a/drivers/bluetooth/btmrvl_main.c b/drivers/bluetooth/btmrvl_main.c
index e605563..f97771c 100644
--- a/drivers/bluetooth/btmrvl_main.c
+++ b/drivers/bluetooth/btmrvl_main.c
@@ -189,6 +189,38 @@ int btmrvl_send_module_cfg_cmd(struct btmrvl_private *priv, int subcmd)
}
EXPORT_SYMBOL_GPL(btmrvl_send_module_cfg_cmd);
+int btmrvl_enable_ps(struct btmrvl_private *priv)
+{
+ struct sk_buff *skb;
+ struct btmrvl_cmd *cmd;
+
+ skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
+ if (skb == NULL) {
+ BT_ERR("No free skb");
+ return -ENOMEM;
+ }
+
+ cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
+ cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF,
+ BT_CMD_AUTO_SLEEP_MODE));
+ cmd->length = 1;
+
+ if (priv->btmrvl_dev.psmode)
+ cmd->data[0] = BT_PS_ENABLE;
+ else
+ cmd->data[0] = BT_PS_DISABLE;
+
+ bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
+
+ skb->dev = (void *) priv->btmrvl_dev.hcidev;
+ skb_queue_head(&priv->adapter->tx_queue, skb);
+
+ BT_DBG("Queue PSMODE Command:%d", cmd->data[0]);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btmrvl_enable_ps);
+
static int btmrvl_enable_hs(struct btmrvl_private *priv)
{
struct sk_buff *skb;
@@ -258,28 +290,7 @@ int btmrvl_prepare_command(struct btmrvl_private *priv)
if (priv->btmrvl_dev.pscmd) {
priv->btmrvl_dev.pscmd = 0;
-
- skb = bt_skb_alloc(sizeof(*cmd), GFP_ATOMIC);
- if (skb == NULL) {
- BT_ERR("No free skb");
- return -ENOMEM;
- }
-
- cmd = (struct btmrvl_cmd *) skb_put(skb, sizeof(*cmd));
- cmd->ocf_ogf = cpu_to_le16(hci_opcode_pack(OGF, BT_CMD_AUTO_SLEEP_MODE));
- cmd->length = 1;
-
- if (priv->btmrvl_dev.psmode)
- cmd->data[0] = BT_PS_ENABLE;
- else
- cmd->data[0] = BT_PS_DISABLE;
-
- bt_cb(skb)->pkt_type = MRVL_VENDOR_PKT;
-
- skb->dev = (void *) priv->btmrvl_dev.hcidev;
- skb_queue_head(&priv->adapter->tx_queue, skb);
-
- BT_DBG("Queue PSMODE Command:%d", cmd->data[0]);
+ btmrvl_enable_ps(priv);
}
if (priv->btmrvl_dev.hscmd) {
diff --git a/drivers/bluetooth/btmrvl_sdio.c b/drivers/bluetooth/btmrvl_sdio.c
index 5b33b85..d6aaf51 100644
--- a/drivers/bluetooth/btmrvl_sdio.c
+++ b/drivers/bluetooth/btmrvl_sdio.c
@@ -930,6 +930,8 @@ static int btmrvl_sdio_probe(struct sdio_func *func,
priv->hw_wakeup_firmware = btmrvl_sdio_wakeup_fw;
btmrvl_send_module_cfg_cmd(priv, MODULE_BRINGUP_REQ);
+ priv->btmrvl_dev.psmode = 1;
+ btmrvl_enable_ps(priv);
return 0;
--
1.5.4.3
next reply other threads:[~2009-09-30 18:18 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-09-30 18:18 Bing Zhao [this message]
2009-10-12 19:58 ` [PATCH v2] Bluetooth: Enable auto sleep mode for btmrvl driver Bing Zhao
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1254334710-1811-1-git-send-email-bzhao@marvell.com \
--to=bzhao@marvell.com \
--cc=akarwar@marvell.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox