From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: Subject: Re: Getting/setting Inquiry trasmit power level unsolved From: Marcel Holtmann To: Natale Vinto Cc: linux-bluetooth@vger.kernel.org In-Reply-To: References: <1258286232.3299.27.camel@violet> Content-Type: text/plain; charset="UTF-8" Date: Tue, 17 Nov 2009 21:56:58 +0100 Message-ID: <1258491418.2003.37.camel@violet> Mime-Version: 1.0 Sender: linux-bluetooth-owner@vger.kernel.org List-ID: Hi Natale, so first of all, stop TOP posting. Otherwise I just going to ignore your emails. This is an open source mailing that follows proper standards and etiquette, > I have a 2.1+EDR bluetooth usb dongle from Cubic 3c Corp. > > Here there is a picture of it: > http://www.ec21.com/global/common/imageView.jsp?title=Sell%20bluetooth%20mini%20dongle,%20100m&img=http://image.ec21.com/image/skye112/OF0007943009_1/Sell_bluetooth_mini_dongle_100m.jpg > > The command hciconfig hci0 gives this result on 2.6.31 Kubuntu Karmic: > hci0: Type: USB > BD Address: 00:15:83:0C:1F:55 ACL MTU: 310:10 SCO MTU: 64:8 > UP RUNNING PSCAN > RX bytes:999 acl:0 sco:0 events:30 errors:0 > TX bytes:367 acl:0 sco:0 commands:28 errors:0 > > Here you are some useful information about it: > > lsusb: > Bus 002 Device 002: ID 0a12:0001 Cambridge Silicon Radio, Ltd > Bluetooth Dongle (HCI mode) > > lsmod | grep bt: > btusb 11568 2 > bluetooth 53828 9 rfcomm,sco,bnep,l2cap,btusb > usbcore 146288 4 btusb,ehci_hcd,uhci_hcd > > so I get always: > hciconfig hci0 inqtpl > Can't read inquiry transmit power level on hci0: Input/output error (5) > > either on Ubuntu/Debian Bluez 4.x/3.x > > so isn't it a CSR based chip? I thought they would work fine with TPL, isn't it? # hciconfig hci0 inqtpl hci0: Type: USB BD Address: 00:19:DB:xx:xx:xx ACL MTU: 310:10 SCO MTU: 64:8 Inquiry transmit power level: 4 # hcidump -X -V < HCI Command: Read Inquiry Response Transmit Power Level (0x03|0x0058) plen 0 > HCI Event: Command Complete (0x0e) plen 5 Read Inquiry Response Transmit Power Level (0x03|0x0058) ncmd 1 status 0x00 level 4 Looks all good to me and works perfectly fine with the CSR dongle, I tested this with. Regards Marcel