[PATCH] Check modem_obj_path is not NULL

[PATCH] Check modem_obj_path is not NULL

[Forrest Zhao]

This could prevent crash in case modem_obj_path is NULL.
---
 audio/telephony-ofono.c |   11 +++++++++++
 1 files changed, 11 insertions(+), 0 deletions(-)

diff --git a/audio/telephony-ofono.c b/audio/telephony-ofono.c
index 45c3905..c145e87 100644
--- a/audio/telephony-ofono.c
+++ b/audio/telephony-ofono.c
@@ -281,6 +281,10 @@ void telephony_dial_number_req(void *telephony_device, const char *number)
 
 	debug("telephony-ofono: dial request to %s", number);
 
+	if (!modem_obj_path)
+		telephony_dial_number_rsp(telephony_device,
+					CME_ERROR_AG_FAILURE);
+
 	if (!strncmp(number, "*31#", 4)) {
 		number += 4;
 		clir = "enabled";
@@ -311,6 +315,10 @@ void telephony_transmit_dtmf_req(void *telephony_device, char tone)
 
 	debug("telephony-ofono: transmit dtmf: %c", tone);
 
+	if (!modem_obj_path)
+		telephony_transmit_dtmf_rsp(telephony_device,
+					CME_ERROR_AG_FAILURE);
+
 	tone_string = g_strdup_printf("%c", tone);
 	ret = send_method_call(OFONO_BUS_NAME, modem_obj_path,
 			OFONO_VCMANAGER_INTERFACE,
@@ -531,6 +539,9 @@ done:
 
 static int get_registration_and_signal_status()
 {
+	if (!modem_obj_path)
+		return -ENOENT;
+
 	return send_method_call(OFONO_BUS_NAME, modem_obj_path,
 			OFONO_NETWORKREG_INTERFACE,
 			"GetProperties", get_registration_reply,
-- 
1.6.1.3

Re: [PATCH] Check modem_obj_path is not NULL

[Johan Hedberg]

Hi Forrest,

On Mon, Mar 29, 2010, Forrest Zhao wrote:
> This could prevent crash in case modem_obj_path is NULL.
> ---
>  audio/telephony-ofono.c |   11 +++++++++++
>  1 files changed, 11 insertions(+), 0 deletions(-)
> 
> diff --git a/audio/telephony-ofono.c b/audio/telephony-ofono.c
> index 45c3905..c145e87 100644
> --- a/audio/telephony-ofono.c
> +++ b/audio/telephony-ofono.c
> @@ -281,6 +281,10 @@ void telephony_dial_number_req(void *telephony_device, const char *number)
>  
>  	debug("telephony-ofono: dial request to %s", number);
>  
> +	if (!modem_obj_path)
> +		telephony_dial_number_rsp(telephony_device,
> +					CME_ERROR_AG_FAILURE);
> +
>  	if (!strncmp(number, "*31#", 4)) {
>  		number += 4;
>  		clir = "enabled";
> @@ -311,6 +315,10 @@ void telephony_transmit_dtmf_req(void *telephony_device, char tone)
>  
>  	debug("telephony-ofono: transmit dtmf: %c", tone);
>  
> +	if (!modem_obj_path)
> +		telephony_transmit_dtmf_rsp(telephony_device,
> +					CME_ERROR_AG_FAILURE);
> +
>  	tone_string = g_strdup_printf("%c", tone);
>  	ret = send_method_call(OFONO_BUS_NAME, modem_obj_path,

This doesn't look right. You report an error but still proceed in the
functions (which will later try to access modem_obj_path). I guess you
should return from the functions in both of these if-clauses.

Johan

Re: [PATCH] Check modem_obj_path is not NULL

[Zhao Forrest]

>> @@ -311,6 +315,10 @@ void telephony_transmit_dtmf_req(void *telephony_device, char tone)
>>
>>       debug("telephony-ofono: transmit dtmf: %c", tone);
>>
>> +     if (!modem_obj_path)
>> +             telephony_transmit_dtmf_rsp(telephony_device,
>> +                                     CME_ERROR_AG_FAILURE);
>> +
>>       tone_string = g_strdup_printf("%c", tone);
>>       ret = send_method_call(OFONO_BUS_NAME, modem_obj_path,
>
> This doesn't look right. You report an error but still proceed in the
> functions (which will later try to access modem_obj_path). I guess you
> should return from the functions in both of these if-clauses.
>
My bad. Will send out the updated patch ASAP.