From: "Gustavo F. Padovan" <padovan@profusion.mobi>
To: linux-bluetooth@vger.kernel.org
Cc: marcel@holtmann.org, gustavo@padovan.org, jprvita@profusion.mobi
Subject: [PATCH 18/34] Bluetooth: Add timer to Acknowledge I-frames
Date: Thu, 1 Apr 2010 17:23:36 -0300 [thread overview]
Message-ID: <1270153432-6477-19-git-send-email-padovan@profusion.mobi> (raw)
In-Reply-To: <1270153432-6477-18-git-send-email-padovan@profusion.mobi>
We ack I-frames on each txWindow/5 I-frames received, but if the sender
stop to send I-frames and it's not a txWindow multiple we can leave some
frames unacked.
So I added a timer to ack I-frames on this case. The timer expires in
200ms.
Signed-off-by: Gustavo F. Padovan <padovan@profusion.mobi>
Reviewed-by: João Paulo Rechi Vita <jprvita@profusion.mobi>
---
include/net/bluetooth/l2cap.h | 4 ++++
net/bluetooth/l2cap.c | 15 +++++++++++++++
2 files changed, 19 insertions(+), 0 deletions(-)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index d9c20c3..48f10f4 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -35,6 +35,7 @@
#define L2CAP_DEFAULT_RETRANS_TO 1000 /* 1 second */
#define L2CAP_DEFAULT_MONITOR_TO 12000 /* 12 seconds */
#define L2CAP_DEFAULT_MAX_PDU_SIZE 672
+#define L2CAP_DEFAULT_ACK_TO 200
#define L2CAP_CONN_TIMEOUT (40000) /* 40 seconds */
#define L2CAP_INFO_TIMEOUT (4000) /* 4 seconds */
@@ -348,6 +349,7 @@ struct l2cap_pinfo {
struct timer_list retrans_timer;
struct timer_list monitor_timer;
+ struct timer_list ack_timer;
struct sk_buff_head tx_queue;
struct sk_buff_head srej_queue;
struct srej_list srej_l;
@@ -382,6 +384,8 @@ struct l2cap_pinfo {
jiffies + msecs_to_jiffies(L2CAP_DEFAULT_RETRANS_TO));
#define __mod_monitor_timer() mod_timer(&l2cap_pi(sk)->monitor_timer, \
jiffies + msecs_to_jiffies(L2CAP_DEFAULT_MONITOR_TO));
+#define __mod_ack_timer() mod_timer(&l2cap_pi(sk)->ack_timer, \
+ jiffies + msecs_to_jiffies(L2CAP_DEFAULT_ACK_TO));
static inline int l2cap_tx_window_full(struct sock *sk)
{
diff --git a/net/bluetooth/l2cap.c b/net/bluetooth/l2cap.c
index b431dc5..0dc7b95 100644
--- a/net/bluetooth/l2cap.c
+++ b/net/bluetooth/l2cap.c
@@ -2230,6 +2230,15 @@ static void l2cap_add_conf_opt(void **ptr, u8 type, u8 len, unsigned long val)
*ptr += L2CAP_CONF_OPT_SIZE + len;
}
+static void l2cap_ack_timeout(unsigned long arg)
+{
+ struct sock *sk = (void *) arg;
+
+ bh_lock_sock(sk);
+ l2cap_send_ack(l2cap_pi(sk));
+ bh_unlock_sock(sk);
+}
+
static inline void l2cap_ertm_init(struct sock *sk)
{
l2cap_pi(sk)->expected_ack_seq = 0;
@@ -2242,6 +2251,8 @@ static inline void l2cap_ertm_init(struct sock *sk)
l2cap_retrans_timeout, (unsigned long) sk);
setup_timer(&l2cap_pi(sk)->monitor_timer,
l2cap_monitor_timeout, (unsigned long) sk);
+ setup_timer(&l2cap_pi(sk)->ack_timer,
+ l2cap_ack_timeout, (unsigned long) sk);
__skb_queue_head_init(SREJ_QUEUE(sk));
}
@@ -2970,6 +2981,7 @@ static inline int l2cap_disconnect_req(struct l2cap_conn *conn, struct l2cap_cmd
skb_queue_purge(SREJ_QUEUE(sk));
del_timer(&l2cap_pi(sk)->retrans_timer);
del_timer(&l2cap_pi(sk)->monitor_timer);
+ del_timer(&l2cap_pi(sk)->ack_timer);
}
l2cap_chan_del(sk, ECONNRESET);
@@ -3000,6 +3012,7 @@ static inline int l2cap_disconnect_rsp(struct l2cap_conn *conn, struct l2cap_cmd
skb_queue_purge(SREJ_QUEUE(sk));
del_timer(&l2cap_pi(sk)->retrans_timer);
del_timer(&l2cap_pi(sk)->monitor_timer);
+ del_timer(&l2cap_pi(sk)->ack_timer);
}
l2cap_chan_del(sk, 0);
@@ -3487,6 +3500,8 @@ expected:
if (err < 0)
return err;
+ __mod_ack_timer();
+
pi->num_to_ack = (pi->num_to_ack + 1) % L2CAP_DEFAULT_NUM_TO_ACK;
if (pi->num_to_ack == L2CAP_DEFAULT_NUM_TO_ACK - 1)
l2cap_send_ack(pi);
--
1.6.4.4
next prev parent reply other threads:[~2010-04-01 20:23 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-04-01 20:23 Patches for eL2CAP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 01/34] Bluetooth: Implement 'Send IorRRorRNR' event Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 02/34] Bluetooth: Support case with F bit set under WAIT_F state Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 03/34] Bluetooth: Fix memory leak of S-frames into L2CAP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 04/34] Bluetooth: Check the minimum {I,S}-frame size " Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 05/34] Bluetooth: Check if SDU size is greater than MTU on L2CAP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 06/34] Bluetooth: Fix expected_tx_seq calculation " Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 07/34] Bluetooth: Implement SendAck() Action on ERTM Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 08/34] Bluetooth: Move set of P-bit to l2cap_send_sframe() Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 09/34] Bluetooth: Add Recv RR (P=0)(F=0) for SREJ_SENT state on ERTM Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 10/34] Bluetooth: Use a l2cap_pinfo struct instead l2cap_pi() macro Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 11/34] Bluetooth: Fix ACL MTU issue Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 12/34] Bluetooth: Split l2cap_data_channel_sframe() Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 13/34] Bluetooth: Handle all cases of receipt of RNR-frames into L2CAP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 14/34] Bluetooth: Group the ack of I-frames into l2cap_data_channel_rrframe() Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 15/34] Bluetooth: Remove duplicate use of __get_reqseq() macro on L2CAP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 16/34] Bluetooth: Finish implementation for Rec RR (P=1) on ERTM Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 17/34] Bluetooth: Ignore I-frames with a duplicated txSeq Gustavo F. Padovan
2010-04-01 20:23 ` Gustavo F. Padovan [this message]
2010-04-01 20:23 ` [PATCH 19/34] Bluetooth: Move specific Basic Mode code to the right place Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 20/34] Bluetooth: Ignore Tx Window value with Streaming mode Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 21/34] Bluetooth: Read RFC conf option on a successful Conf RSP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 22/34] Bluetooth: Fix configuration of the MPS value Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 23/34] Bluetooth: Add le16 macro to Retransmission and Monitor Timeouts values Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 24/34] Bluetooth: Check the SDU size against the MTU value Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 25/34] Bluetooth: Send Ack after clear the SREJ list Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 26/34] Bluetooth: Add sockopt configuration for txWindow on L2CAP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 27/34] Bluetooth: Change acknowledgement to use the value of txWindow Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 28/34] Bluetooth: Add module parameter for txWindow size on L2CAP Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 29/34] Bluetooth: Enable option to configure Max Transmission value via sockopt Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 30/34] Bluetooth: Make hci_send_acl() void Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 31/34] Bluetooth: Make hci_send_sco() void Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 32/34] Bluetooth: Return the data length sent on connectionless channels Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 33/34] Bluetooth: Clean sco_send_frame() flow Gustavo F. Padovan
2010-04-01 20:23 ` [PATCH 34/34] Bluetooth: Remove unneeded check for MTU on sco_send_frame() Gustavo F. Padovan
2010-04-19 20:15 ` Patches for eL2CAP Gustavo F. Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1270153432-6477-19-git-send-email-padovan@profusion.mobi \
--to=padovan@profusion.mobi \
--cc=gustavo@padovan.org \
--cc=jprvita@profusion.mobi \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).