From: Marcel Holtmann <marcel@holtmann.org>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH] Bluetooth: Defer SCO setup if mode change is pending
Date: Mon, 19 Jul 2010 11:06:16 -0700 [thread overview]
Message-ID: <1279562776-12901-1-git-send-email-marcel@holtmann.org> (raw)
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
include/net/bluetooth/hci_core.h | 2 +
net/bluetooth/hci_conn.c | 32 ++++++++++++++++++++++++---
net/bluetooth/hci_event.c | 43 ++++++++++++++++---------------------
3 files changed, 49 insertions(+), 28 deletions(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 350b3e6..8b28962 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -256,6 +256,7 @@ enum {
HCI_CONN_ENCRYPT_PEND,
HCI_CONN_RSWITCH_PEND,
HCI_CONN_MODE_CHANGE_PEND,
+ HCI_CONN_SCO_SETUP_PEND,
};
static inline void hci_conn_hash_init(struct hci_dev *hdev)
@@ -336,6 +337,7 @@ void hci_acl_connect(struct hci_conn *conn);
void hci_acl_disconn(struct hci_conn *conn, __u8 reason);
void hci_add_sco(struct hci_conn *conn, __u16 handle);
void hci_setup_sync(struct hci_conn *conn, __u16 handle);
+void hci_sco_setup(struct hci_conn *conn, __u8 status);
struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst);
int hci_conn_del(struct hci_conn *conn);
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index e9fef83..0b1e460 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -155,6 +155,27 @@ void hci_setup_sync(struct hci_conn *conn, __u16 handle)
hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp);
}
+/* Device _must_ be locked */
+void hci_sco_setup(struct hci_conn *conn, __u8 status)
+{
+ struct hci_conn *sco = conn->link;
+
+ BT_DBG("%p", conn);
+
+ if (!sco)
+ return;
+
+ if (!status) {
+ if (lmp_esco_capable(conn->hdev))
+ hci_setup_sync(sco, conn->handle);
+ else
+ hci_add_sco(sco, conn->handle);
+ } else {
+ hci_proto_connect_cfm(sco, status);
+ hci_conn_del(sco);
+ }
+}
+
static void hci_conn_timeout(unsigned long arg)
{
struct hci_conn *conn = (void *) arg;
@@ -385,10 +406,13 @@ struct hci_conn *hci_connect(struct hci_dev *hdev, int type, bdaddr_t *dst, __u8
acl->power_save = 1;
hci_conn_enter_active_mode(acl);
- if (lmp_esco_capable(hdev))
- hci_setup_sync(sco, acl->handle);
- else
- hci_add_sco(sco, acl->handle);
+ if (test_bit(HCI_CONN_MODE_CHANGE_PEND, &acl->pend)) {
+ /* defer SCO setup until mode change completed */
+ set_bit(HCI_CONN_SCO_SETUP_PEND, &acl->pend);
+ return sco;
+ }
+
+ hci_sco_setup(acl, 0x00);
}
return sco;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 2069c3b..461413c 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -775,9 +775,6 @@ static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status)
BT_DBG("%s status 0x%x", hdev->name, status);
- if (!status)
- return;
-
cp = hci_sent_cmd_data(hdev, HCI_OP_SNIFF_MODE);
if (!cp)
return;
@@ -785,8 +782,13 @@ static void hci_cs_sniff_mode(struct hci_dev *hdev, __u8 status)
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
- if (conn)
- clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
+ if (conn) {
+ if (status)
+ clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
+
+ if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->pend))
+ hci_sco_setup(conn, status);
+ }
hci_dev_unlock(hdev);
}
@@ -798,9 +800,6 @@ static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status)
BT_DBG("%s status 0x%x", hdev->name, status);
- if (!status)
- return;
-
cp = hci_sent_cmd_data(hdev, HCI_OP_EXIT_SNIFF_MODE);
if (!cp)
return;
@@ -808,8 +807,13 @@ static void hci_cs_exit_sniff_mode(struct hci_dev *hdev, __u8 status)
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(cp->handle));
- if (conn)
- clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
+ if (conn) {
+ if (status)
+ clear_bit(HCI_CONN_MODE_CHANGE_PEND, &conn->pend);
+
+ if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->pend))
+ hci_sco_setup(conn, status);
+ }
hci_dev_unlock(hdev);
}
@@ -915,20 +919,8 @@ static inline void hci_conn_complete_evt(struct hci_dev *hdev, struct sk_buff *s
} else
conn->state = BT_CLOSED;
- if (conn->type == ACL_LINK) {
- struct hci_conn *sco = conn->link;
- if (sco) {
- if (!ev->status) {
- if (lmp_esco_capable(hdev))
- hci_setup_sync(sco, conn->handle);
- else
- hci_add_sco(sco, conn->handle);
- } else {
- hci_proto_connect_cfm(sco, ev->status);
- hci_conn_del(sco);
- }
- }
- }
+ if (conn->type == ACL_LINK)
+ hci_sco_setup(conn, ev->status);
if (ev->status) {
hci_proto_connect_cfm(conn, ev->status);
@@ -1481,6 +1473,9 @@ static inline void hci_mode_change_evt(struct hci_dev *hdev, struct sk_buff *skb
else
conn->power_save = 0;
}
+
+ if (test_and_clear_bit(HCI_CONN_SCO_SETUP_PEND, &conn->pend))
+ hci_sco_setup(conn, ev->status);
}
hci_dev_unlock(hdev);
--
1.7.1.1
next reply other threads:[~2010-07-19 18:06 UTC|newest]
Thread overview: 9+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-07-19 18:06 Marcel Holtmann [this message]
2010-07-20 4:44 ` [PATCH] Bluetooth: Defer SCO setup if mode change is pending Ron Shaffer
2010-07-20 16:56 ` Marcel Holtmann
2010-07-22 19:45 ` [PATCH v2] " Ron Shaffer
2010-07-23 2:48 ` Marcel Holtmann
2010-07-23 15:39 ` Ron Shaffer
2010-07-25 18:41 ` Marcel Holtmann
2010-07-26 14:06 ` [PATCH v3] " Ron Shaffer
2010-07-27 19:40 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1279562776-12901-1-git-send-email-marcel@holtmann.org \
--to=marcel@holtmann.org \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).