From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: marcel@holtmann.org, gustavo@padovan.org,
rshaffer@codeaurora.org, linux-arm-msm@vger.kernel.org,
Mat Martineau <mathewm@codeaurora.org>
Subject: [PATCH 7/9] Bluetooth: Use common SOCK_STREAM receive code in RFCOMM.
Date: Thu, 5 Aug 2010 15:54:25 -0700 [thread overview]
Message-ID: <1281048867-32630-8-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1281048867-32630-1-git-send-email-mathewm@codeaurora.org>
To reduce code duplication, have rfcomm_sock_recvmsg() call
bt_sock_stream_recvmsg(). The common bt_sock_stream_recvmsg()
code is nearly identical, with the RFCOMM-specific functionality
for deferred setup and connection unthrottling left in
rfcomm_sock_recvmsg().
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/rfcomm/sock.c | 104 +++----------------------------------------
1 files changed, 6 insertions(+), 98 deletions(-)
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 44a6232..4396f47 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -617,121 +617,29 @@ static int rfcomm_sock_sendmsg(struct kiocb *iocb, struct socket *sock,
return sent;
}
-static long rfcomm_sock_data_wait(struct sock *sk, long timeo)
-{
- DECLARE_WAITQUEUE(wait, current);
-
- add_wait_queue(sk_sleep(sk), &wait);
- for (;;) {
- set_current_state(TASK_INTERRUPTIBLE);
-
- if (!skb_queue_empty(&sk->sk_receive_queue) ||
- sk->sk_err ||
- (sk->sk_shutdown & RCV_SHUTDOWN) ||
- signal_pending(current) ||
- !timeo)
- break;
-
- set_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
- release_sock(sk);
- timeo = schedule_timeout(timeo);
- lock_sock(sk);
- clear_bit(SOCK_ASYNC_WAITDATA, &sk->sk_socket->flags);
- }
-
- __set_current_state(TASK_RUNNING);
- remove_wait_queue(sk_sleep(sk), &wait);
- return timeo;
-}
-
static int rfcomm_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
struct msghdr *msg, size_t size, int flags)
{
struct sock *sk = sock->sk;
struct rfcomm_dlc *d = rfcomm_pi(sk)->dlc;
- int err = 0;
- size_t target, copied = 0;
- long timeo;
+ int len;
if (test_and_clear_bit(RFCOMM_DEFER_SETUP, &d->flags)) {
rfcomm_dlc_accept(d);
return 0;
}
- if (flags & MSG_OOB)
- return -EOPNOTSUPP;
-
- msg->msg_namelen = 0;
-
- BT_DBG("sk %p size %zu", sk, size);
+ len = bt_sock_stream_recvmsg(iocb, sock, msg, size, flags);
lock_sock(sk);
+ if (!(flags & MSG_PEEK) && len > 0)
+ atomic_sub(len, &sk->sk_rmem_alloc);
- target = sock_rcvlowat(sk, flags & MSG_WAITALL, size);
- timeo = sock_rcvtimeo(sk, flags & MSG_DONTWAIT);
-
- do {
- struct sk_buff *skb;
- int chunk;
-
- skb = skb_dequeue(&sk->sk_receive_queue);
- if (!skb) {
- if (copied >= target)
- break;
-
- if ((err = sock_error(sk)) != 0)
- break;
- if (sk->sk_shutdown & RCV_SHUTDOWN)
- break;
-
- err = -EAGAIN;
- if (!timeo)
- break;
-
- timeo = rfcomm_sock_data_wait(sk, timeo);
-
- if (signal_pending(current)) {
- err = sock_intr_errno(timeo);
- goto out;
- }
- continue;
- }
-
- chunk = min_t(unsigned int, skb->len, size);
- if (memcpy_toiovec(msg->msg_iov, skb->data, chunk)) {
- skb_queue_head(&sk->sk_receive_queue, skb);
- if (!copied)
- copied = -EFAULT;
- break;
- }
- copied += chunk;
- size -= chunk;
-
- sock_recv_ts_and_drops(msg, sk, skb);
-
- if (!(flags & MSG_PEEK)) {
- atomic_sub(chunk, &sk->sk_rmem_alloc);
-
- skb_pull(skb, chunk);
- if (skb->len) {
- skb_queue_head(&sk->sk_receive_queue, skb);
- break;
- }
- kfree_skb(skb);
-
- } else {
- /* put message back and return */
- skb_queue_head(&sk->sk_receive_queue, skb);
- break;
- }
- } while (size);
-
-out:
if (atomic_read(&sk->sk_rmem_alloc) <= (sk->sk_rcvbuf >> 2))
rfcomm_dlc_unthrottle(rfcomm_pi(sk)->dlc);
-
release_sock(sk);
- return copied ? : err;
+
+ return len;
}
static int rfcomm_sock_setsockopt_old(struct socket *sock, int optname, char __user *optval, unsigned int optlen)
--
1.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
next prev parent reply other threads:[~2010-08-05 22:54 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-05 22:54 [PATCH v3 0/9] Bluetooth: L2CAP updates for PSM validation and ERTM Mat Martineau
2010-08-05 22:54 ` [PATCH 1/9] Bluetooth: Only enable for L2CAP FCS for ERTM or streaming Mat Martineau
2010-08-09 2:43 ` Marcel Holtmann
2010-08-09 13:12 ` Gustavo F. Padovan
2010-08-09 16:50 ` Mat Martineau
2010-08-05 22:54 ` [PATCH 2/9] Bluetooth: Change default ERTM retransmit timeout Mat Martineau
2010-08-09 8:37 ` Marcel Holtmann
2010-08-05 22:54 ` [PATCH 3/9] Bluetooth: Validate PSM values in calls to connect() and bind() Mat Martineau
2010-08-09 2:46 ` Marcel Holtmann
2010-08-05 22:54 ` [PATCH 4/9] Bluetooth: Fix endianness issue with L2CAP MPS configuration Mat Martineau
2010-08-09 8:36 ` Marcel Holtmann
2010-08-05 22:54 ` [PATCH 5/9] Bluetooth: Fix incorrect setting of remote_tx_win for L2CAP ERTM Mat Martineau
2010-08-09 8:41 ` Marcel Holtmann
2010-08-05 22:54 ` [PATCH 6/9] Bluetooth: Add common code for stream-oriented recvmsg() Mat Martineau
2010-08-05 22:54 ` Mat Martineau [this message]
2010-08-05 22:54 ` [PATCH 8/9] Bluetooth: Use a stream-oriented recvmsg with SOCK_STREAM L2CAP sockets Mat Martineau
2010-08-09 2:50 ` Marcel Holtmann
2010-08-05 22:54 ` [PATCH 9/9] Bluetooth: Use 3-DH5 payload size for default ERTM max PDU size Mat Martineau
2010-08-09 8:44 ` Marcel Holtmann
-- strict thread matches above, loose matches on Subject: below --
2010-08-04 22:48 [PATCH v2 0/9] Bluetooth: L2CAP updates for PSM validation and ERTM Mat Martineau
2010-08-04 22:49 ` [PATCH 7/9] Bluetooth: Use common SOCK_STREAM receive code in RFCOMM Mat Martineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281048867-32630-8-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=gustavo@padovan.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=rshaffer@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).