From: Inga Stotland <ingas@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: rshaffer@codeaurora.org, johan.hedberg@gmail.com,
marcel@holtmann.org, Inga Stotland <ingas@codeaurora.org>
Subject: [PATCH 1/2] HCI commands related to AMP functionality
Date: Tue, 10 Aug 2010 17:12:55 -0700 [thread overview]
Message-ID: <1281485576-32715-2-git-send-email-ingas@codeaurora.org> (raw)
In-Reply-To: <1281485576-32715-1-git-send-email-ingas@codeaurora.org>
Added constructs for the following HCI commands:
CREATE_PHYSICAL_LINK, ACCEPT_PHYSICAL_LINK, DISCONNECT_PHYSICAL_LINK,
CREATE_LOGICAL_LINK, ACCEPT_LOGICAL_LINK, DISCONNECT_LOGICAL_LINK,
LOGICAL_LINK_CANCEL, FLOW_SPEC_MODIFY,
READ_LOGICAL_LINK_ACCEPT_TIMEOUT, WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT,
SET_EVENT_MASK_PAGE_2, READ_LOCATION_DATA, WRITE_LOCATION_DATA,
READ_FLOW_CONTROL_MODE, WRITE_FLOW_CONTROL_MODE,
READ_ENHANCED_TRANSMIT_POWER_LEVEL, READ_BEST_EFFORT_FLUSH_TIMEOUT,
WRITE_BEST_EFFORT_FLUSH_TIMEOUT, READ_LOCAL_AMP_INFO,
READ_LOCAL_AMP_ASSOC, WRITE_REMOTE_AMP_ASSOC
---
lib/hci.h | 145 +++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 145 insertions(+), 0 deletions(-)
diff --git a/lib/hci.h b/lib/hci.h
index f31918d..ae7b6da 100644
--- a/lib/hci.h
+++ b/lib/hci.h
@@ -528,6 +528,55 @@ typedef struct {
} __attribute__ ((packed)) io_capability_neg_reply_cp;
#define IO_CAPABILITY_NEG_REPLY_CP_SIZE 7
+#define OCF_CREATE_PHYSICAL_LINK 0x0035
+typedef struct {
+ uint8_t handle;
+ uint8_t key_length;
+ uint8_t key_type;
+ uint8_t key[32];
+} __attribute__ ((packed)) create_physical_link_cp;
+#define CREATE_PHYSICAL_LINK_CP_SIZE 35
+
+#define OCF_ACCEPT_PHYSICAL_LINK 0x0036
+
+#define OCF_DISCONNECT_PHYSICAL_LINK 0x0037
+typedef struct {
+ uint8_t handle;
+ uint8_t reason;
+} __attribute__ ((packed)) disconnect_physical_link_cp;
+#define DISCONNECT_PHYSICAL_LINK_CP_SIZE 2
+
+#define OCF_CREATE_LOGICAL_LINK 0x0038
+typedef struct {
+ uint8_t handle;
+ uint8_t tx_flow[16];
+ uint8_t rx_flow[16];
+} __attribute__ ((packed)) create_logical_link_cp;
+#define CREATE_LOGICAL_LINK_CP_SIZE 33
+
+#define OCF_ACCEPT_LOGICAL_LINK 0x0039
+
+#define OCF_DISCONNECT_LOGICAL_LINK 0x003A
+typedef struct {
+ uint16_t handle;
+} __attribute__ ((packed)) disconnect_logical_link_cp;
+#define DISCONNECT_LOGICAL_LINK_CP_SIZE 2
+
+#define OCF_LOGICAL_LINK_CANCEL 0x003B
+typedef struct {
+ uint8_t handle;
+ uint8_t tx_flow_id;
+} __attribute__ ((packed)) cancel_logical_link_cp;
+#define LOGICAL_LINK_CANCEL_CP_SIZE 2
+typedef struct {
+ uint8_t status;
+ uint8_t handle;
+ uint8_t tx_flow_id;
+} __attribute__ ((packed)) cancel_logical_link_rp;
+#define LOGICAL_LINK_CANCEL_RP_SIZE 3
+
+#define OCF_FLOW_SPEC_MODIFY 0x003C
+
/* Link Policy */
#define OGF_LINK_POLICY 0x02
@@ -1123,6 +1172,57 @@ typedef struct {
} __attribute__ ((packed)) send_keypress_notify_rp;
#define SEND_KEYPRESS_NOTIFY_RP_SIZE 1
+#define OCF_READ_LOGICAL_LINK_ACCEPT_TIMEOUT 0x0061
+typedef struct {
+ uint8_t status;
+ uint16_t timeout;
+} __attribute__ ((packed)) read_log_link_accept_timeout_rp;
+#define READ_LOGICAL_LINK_ACCEPT_TIMEOUT_RP_SIZE 3
+
+#define OCF_WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT 0x0062
+typedef struct {
+ uint16_t timeout;
+} __attribute__ ((packed)) write_log_link_accept_timeout_cp;
+#define WRITE_LOGICAL_LINK_ACCEPT_TIMEOUT_CP_SIZE 2
+
+#define OCF_SET_EVENT_MASK_PAGE_2 0x0063
+
+#define OCF_READ_LOCATION_DATA 0x0064
+
+#define OCF_WRITE_LOCATION_DATA 0x0065
+
+#define OCF_READ_FLOW_CONTROL_MODE 0x0066
+
+#define OCF_WRITE_FLOW_CONTROL_MODE 0x0067
+
+#define OCF_READ_ENHANCED_TRANSMIT_POWER_LEVEL 0x0068
+typedef struct {
+ uint8_t status;
+ uint16_t handle;
+ int8_t level_gfsk;
+ int8_t level_dqpsk;
+ int8_t level_8dpsk;
+} __attribute__ ((packed)) read_enhanced_transmit_power_level_rp;
+#define READ_ENHANCED_TRANSMIT_POWER_LEVEL_RP_SIZE 6
+
+#define OCF_READ_BEST_EFFORT_FLUSH_TIMEOUT 0x0069
+typedef struct {
+ uint8_t status;
+ uint32_t timeout;
+} __attribute__ ((packed)) read_best_effort_flush_timeout_rp;
+#define READ_BEST_EFFORT_FLUSH_TIMEOUT_RP_SIZE 5
+
+#define OCF_WRITE_BEST_EFFORT_FLUSH_TIMEOUT 0x006A
+typedef struct {
+ uint16_t handle;
+ uint32_t timeout;
+} __attribute__ ((packed)) write_best_effort_flush_timeout_cp;
+#define WRITE_BEST_EFFORT_FLUSH_TIMEOUT_CP_SIZE 6
+typedef struct {
+ uint8_t status;
+} __attribute__ ((packed)) write_best_effort_flush_timeout_rp;
+#define WRITE_BEST_EFFORT_FLUSH_TIMEOUT_RP_SIZE 1
+
/* Informational Parameters */
#define OGF_INFO_PARAM 0x04
@@ -1240,6 +1340,51 @@ typedef struct {
} __attribute__ ((packed)) read_clock_rp;
#define READ_CLOCK_RP_SIZE 9
+#define OCF_READ_LOCAL_AMP_INFO 0x0009
+typedef struct {
+ uint8_t status;
+ uint8_t amp_status;
+ uint32_t total_bandwidth;
+ uint32_t max_guaranteed_bandwidth;
+ uint32_t min_latency;
+ uint32_t max_pdu_size;
+ uint8_t controller_type;
+ uint16_t pal_caps;
+ uint16_t max_amp_assoc_length;
+ uint32_t max_flush_timeout;
+ uint32_t best_effort_flush_timeout;
+} __attribute__ ((packed)) read_local_amp_info_rp;
+#define READ_LOCAL_AMP_INFO_RP_SIZE 31
+
+#define OCF_READ_LOCAL_AMP_ASSOC 0x000A
+typedef struct {
+ uint8_t handle;
+ uint16_t length_so_far;
+ uint16_t assoc_length;
+} __attribute__ ((packed)) read_local_amp_assoc_cp;
+#define READ_LOCAL_AMP_ASSOC_CP_SIZE 5
+typedef struct {
+ uint8_t status;
+ uint8_t handle;
+ uint16_t length;
+ uint8_t fragment[248];
+} __attribute__ ((packed)) read_local_amp_assoc_rp;
+#define READ_LOCAL_AMP_ASSOC_RP_SIZE 252
+
+#define OCF_WRITE_REMOTE_AMP_ASSOC 0x000B
+typedef struct {
+ uint8_t handle;
+ uint16_t length_so_far;
+ uint16_t assoc_length;
+ uint8_t fragment[248];
+} __attribute__ ((packed)) write_remote_amp_assoc_cp;
+#define WRITE_REMOTE_AMP_ASSOC_CP_SIZE 253
+typedef struct {
+ uint8_t status;
+ uint8_t handle;
+} __attribute__ ((packed)) write_remote_amp_assoc_rp;
+#define WRITE_REMOTE_AMP_ASSOC_RP_SIZE 2
+
/* Testing commands */
#define OGF_TESTING_CMD 0x3e
--
1.7.2
--
Inga Stotland
Sent by an employee of the Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum.
next prev parent reply other threads:[~2010-08-11 0:12 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-08-11 0:12 Support for HCI commands and events related to AMP functionality Inga Stotland
2010-08-11 0:12 ` Inga Stotland [this message]
2010-08-11 0:12 ` [PATCH 2/2] HCI " Inga Stotland
2010-08-11 16:26 ` Support for HCI commands and " ingas
2010-08-17 14:26 ` Johan Hedberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1281485576-32715-2-git-send-email-ingas@codeaurora.org \
--to=ingas@codeaurora.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=rshaffer@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).