From: Emeltchenko Andrei <Andrei.Emeltchenko.news@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCHv2 2/5] Bluetooth: clean up rfcomm code
Date: Wed, 1 Dec 2010 16:58:23 +0200 [thread overview]
Message-ID: <1291215506-11398-3-git-send-email-Andrei.Emeltchenko.news@gmail.com> (raw)
In-Reply-To: <1291215506-11398-1-git-send-email-Andrei.Emeltchenko.news@gmail.com>
From: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
Remove extra spaces, assignments in if statement, zeroing static
variables, extra braces. Fix includes.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@nokia.com>
---
include/net/bluetooth/rfcomm.h | 4 ++--
net/bluetooth/rfcomm/core.c | 8 ++++----
net/bluetooth/rfcomm/sock.c | 5 +++--
net/bluetooth/rfcomm/tty.c | 28 ++++++++++++++++------------
4 files changed, 25 insertions(+), 20 deletions(-)
diff --git a/include/net/bluetooth/rfcomm.h b/include/net/bluetooth/rfcomm.h
index 71047bc..2e78756 100644
--- a/include/net/bluetooth/rfcomm.h
+++ b/include/net/bluetooth/rfcomm.h
@@ -105,7 +105,7 @@
struct rfcomm_hdr {
u8 addr;
u8 ctrl;
- u8 len; // Actual size can be 2 bytes
+ u8 len; /* Actual size can be 2 bytes */
} __packed;
struct rfcomm_cmd {
@@ -228,7 +228,7 @@ struct rfcomm_dlc {
/* ---- RFCOMM SEND RPN ---- */
int rfcomm_send_rpn(struct rfcomm_session *s, int cr, u8 dlci,
u8 bit_rate, u8 data_bits, u8 stop_bits,
- u8 parity, u8 flow_ctrl_settings,
+ u8 parity, u8 flow_ctrl_settings,
u8 xon_char, u8 xoff_char, u16 param_mask);
/* ---- RFCOMM DLCs (channels) ---- */
diff --git a/net/bluetooth/rfcomm/core.c b/net/bluetooth/rfcomm/core.c
index fa642aa..c1e2bba 100644
--- a/net/bluetooth/rfcomm/core.c
+++ b/net/bluetooth/rfcomm/core.c
@@ -41,7 +41,7 @@
#include <linux/slab.h>
#include <net/sock.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <asm/unaligned.h>
#include <net/bluetooth/bluetooth.h>
@@ -51,10 +51,10 @@
#define VERSION "1.11"
-static int disable_cfc = 0;
+static int disable_cfc;
+static int l2cap_ertm;
static int channel_mtu = -1;
static unsigned int l2cap_mtu = RFCOMM_MAX_L2CAP_MTU;
-static int l2cap_ertm = 0;
static struct task_struct *rfcomm_thread;
@@ -1901,7 +1901,7 @@ static inline void rfcomm_check_connection(struct rfcomm_session *s)
BT_DBG("%p state %ld", s, s->state);
- switch(sk->sk_state) {
+ switch (sk->sk_state) {
case BT_CONNECTED:
s->state = BT_CONNECT;
diff --git a/net/bluetooth/rfcomm/sock.c b/net/bluetooth/rfcomm/sock.c
index 0207bd6..66cc1f0 100644
--- a/net/bluetooth/rfcomm/sock.c
+++ b/net/bluetooth/rfcomm/sock.c
@@ -45,7 +45,7 @@
#include <net/sock.h>
#include <asm/system.h>
-#include <asm/uaccess.h>
+#include <linux/uaccess.h>
#include <net/bluetooth/bluetooth.h>
#include <net/bluetooth/hci_core.h>
@@ -888,7 +888,8 @@ static int rfcomm_sock_shutdown(struct socket *sock, int how)
BT_DBG("sock %p, sk %p", sock, sk);
- if (!sk) return 0;
+ if (!sk)
+ return 0;
lock_sock(sk);
if (!sk->sk_shutdown) {
diff --git a/net/bluetooth/rfcomm/tty.c b/net/bluetooth/rfcomm/tty.c
index a9b81f5..2575c2d 100644
--- a/net/bluetooth/rfcomm/tty.c
+++ b/net/bluetooth/rfcomm/tty.c
@@ -58,9 +58,9 @@ struct rfcomm_dev {
bdaddr_t src;
bdaddr_t dst;
- u8 channel;
+ u8 channel;
- uint modem_status;
+ uint modem_status;
struct rfcomm_dlc *dlc;
struct tty_struct *tty;
@@ -69,7 +69,7 @@ struct rfcomm_dev {
struct device *tty_dev;
- atomic_t wmem_alloc;
+ atomic_t wmem_alloc;
struct sk_buff_head pending;
};
@@ -431,7 +431,8 @@ static int rfcomm_release_dev(void __user *arg)
BT_DBG("dev_id %d flags 0x%x", req.dev_id, req.flags);
- if (!(dev = rfcomm_dev_get(req.dev_id)))
+ dev = rfcomm_dev_get(req.dev_id);
+ if (!dev)
return -ENODEV;
if (dev->flags != NOCAP_FLAGS && !capable(CAP_NET_ADMIN)) {
@@ -470,7 +471,8 @@ static int rfcomm_get_dev_list(void __user *arg)
size = sizeof(*dl) + dev_num * sizeof(*di);
- if (!(dl = kmalloc(size, GFP_KERNEL)))
+ dl = kmalloc(size, GFP_KERNEL);
+ if (!dl)
return -ENOMEM;
di = dl->dev_info;
@@ -513,7 +515,8 @@ static int rfcomm_get_dev_info(void __user *arg)
if (copy_from_user(&di, arg, sizeof(di)))
return -EFAULT;
- if (!(dev = rfcomm_dev_get(di.id)))
+ dev = rfcomm_dev_get(di.id);
+ if (!dev)
return -ENODEV;
di.flags = dev->flags;
@@ -561,7 +564,8 @@ static void rfcomm_dev_data_ready(struct rfcomm_dlc *dlc, struct sk_buff *skb)
return;
}
- if (!(tty = dev->tty) || !skb_queue_empty(&dev->pending)) {
+ tty = dev->tty;
+ if (!tty || !skb_queue_empty(&dev->pending)) {
skb_queue_tail(&dev->pending, skb);
return;
}
@@ -796,7 +800,8 @@ static int rfcomm_tty_write(struct tty_struct *tty, const unsigned char *buf, in
memcpy(skb_put(skb, size), buf + sent, size);
- if ((err = rfcomm_dlc_send(dlc, skb)) < 0) {
+ err = rfcomm_dlc_send(dlc, skb);
+ if (err < 0) {
kfree_skb(skb);
break;
}
@@ -892,7 +897,7 @@ static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
/* Parity on/off and when on, odd/even */
if (((old->c_cflag & PARENB) != (new->c_cflag & PARENB)) ||
- ((old->c_cflag & PARODD) != (new->c_cflag & PARODD)) ) {
+ ((old->c_cflag & PARODD) != (new->c_cflag & PARODD))) {
changes |= RFCOMM_RPN_PM_PARITY;
BT_DBG("Parity change detected.");
}
@@ -937,11 +942,10 @@ static void rfcomm_tty_set_termios(struct tty_struct *tty, struct ktermios *old)
/* POSIX does not support 1.5 stop bits and RFCOMM does not
* support 2 stop bits. So a request for 2 stop bits gets
* translated to 1.5 stop bits */
- if (new->c_cflag & CSTOPB) {
+ if (new->c_cflag & CSTOPB)
stop_bits = RFCOMM_RPN_STOP_15;
- } else {
+ else
stop_bits = RFCOMM_RPN_STOP_1;
- }
/* Handle number of data bits [5-8] */
if ((old->c_cflag & CSIZE) != (new->c_cflag & CSIZE))
--
1.7.1
next prev parent reply other threads:[~2010-12-01 14:58 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2010-12-01 14:58 [PATCHv2 0/5] Clean up sco, rfcomm and hci code Emeltchenko Andrei
2010-12-01 14:58 ` [PATCHv2 1/5] Bluetooth: clean up sco code Emeltchenko Andrei
2010-12-01 21:20 ` Gustavo F. Padovan
2010-12-01 21:31 ` Anderson Lizardo
2010-12-01 21:44 ` Gustavo F. Padovan
2010-12-02 7:14 ` Johan Hedberg
2010-12-02 7:12 ` Johan Hedberg
2010-12-02 7:49 ` Marcel Holtmann
2010-12-01 14:58 ` Emeltchenko Andrei [this message]
2010-12-01 21:52 ` [PATCHv2 2/5] Bluetooth: clean up rfcomm code Gustavo F. Padovan
2010-12-01 14:58 ` [PATCHv2 3/5] Bluetooth: clean up l2cap code Emeltchenko Andrei
2010-12-01 21:21 ` Gustavo F. Padovan
2010-12-01 21:53 ` Gustavo F. Padovan
2010-12-01 14:58 ` [PATCHv2 4/5] Bluetooth: clean up hci code Emeltchenko Andrei
2010-12-01 21:53 ` Gustavo F. Padovan
2010-12-01 14:58 ` [PATCHv2 5/5] Bluetooth: clean up legal text Emeltchenko Andrei
2010-12-01 21:42 ` Gustavo F. Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1291215506-11398-3-git-send-email-Andrei.Emeltchenko.news@gmail.com \
--to=andrei.emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).