From: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
To: <linux-bluetooth@vger.kernel.org>
Cc: Johan Hedberg <johan.hedberg@gmail.com>, <padovan@profusion.mobi>,
<luiz.dentz@gmail.com>,
Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
Subject: [PATCH v2] Bluetooth: Fix auth_complete_evt for legacy units
Date: Thu, 26 May 2011 10:46:48 +0200 [thread overview]
Message-ID: <1306399608-10595-1-git-send-email-waldemar.rymarkiewicz@tieto.com> (raw)
Legacy devices don't re-authenticate the link properly if a link key
already exists. Thus, don't update sec_level for this case even if
hci_auth_complete_evt indicates success. Otherwise the sec_level will
not reflect a real security on the link.
Signed-off-by: Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
---
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_conn.c | 2 +
net/bluetooth/hci_event.c | 73 +++++++++++++++++++++-----------------
3 files changed, 43 insertions(+), 33 deletions(-)
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 6c994c0..1af6754 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -313,6 +313,7 @@ void hci_inquiry_cache_update(struct hci_dev *hdev, struct inquiry_data *data);
/* ----- HCI Connections ----- */
enum {
HCI_CONN_AUTH_PEND,
+ HCI_CONN_REAUTH_PEND,
HCI_CONN_ENCRYPT_PEND,
HCI_CONN_RSWITCH_PEND,
HCI_CONN_MODE_CHANGE_PEND,
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 3163330..e675402 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -548,6 +548,8 @@ static int hci_conn_auth(struct hci_conn *conn, __u8 sec_level, __u8 auth_type)
cp.handle = cpu_to_le16(conn->handle);
hci_send_cmd(conn->hdev, HCI_OP_AUTH_REQUESTED,
sizeof(cp), &cp);
+ if (conn->key_type != 0xff)
+ set_bit(HCI_CONN_REAUTH_PEND, &conn->pend);
}
return 0;
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index f13ddbf..4b289a4 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1460,51 +1460,58 @@ static inline void hci_auth_complete_evt(struct hci_dev *hdev, struct sk_buff *s
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_handle(hdev, __le16_to_cpu(ev->handle));
- if (conn) {
- if (!ev->status) {
+ if (!conn)
+ goto unlock;
+
+ if (!ev->status) {
+ if (!(conn->ssp_mode > 0 && hdev->ssp_mode > 0) &&
+ test_bit(HCI_CONN_REAUTH_PEND, &conn->pend)) {
+ BT_INFO("re-auth of legacy device is not possible.");
+ } else {
conn->link_mode |= HCI_LM_AUTH;
conn->sec_level = conn->pending_sec_level;
- } else {
- mgmt_auth_failed(hdev->id, &conn->dst, ev->status);
}
+ } else {
+ mgmt_auth_failed(hdev->id, &conn->dst, ev->status);
+ }
- clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
+ clear_bit(HCI_CONN_AUTH_PEND, &conn->pend);
+ clear_bit(HCI_CONN_REAUTH_PEND, &conn->pend);
- if (conn->state == BT_CONFIG) {
- if (!ev->status && hdev->ssp_mode > 0 &&
- conn->ssp_mode > 0) {
- struct hci_cp_set_conn_encrypt cp;
- cp.handle = ev->handle;
- cp.encrypt = 0x01;
- hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT,
- sizeof(cp), &cp);
- } else {
- conn->state = BT_CONNECTED;
- hci_proto_connect_cfm(conn, ev->status);
- hci_conn_put(conn);
- }
+ if (conn->state == BT_CONFIG) {
+ if (!ev->status && hdev->ssp_mode > 0 && conn->ssp_mode > 0) {
+ struct hci_cp_set_conn_encrypt cp;
+ cp.handle = ev->handle;
+ cp.encrypt = 0x01;
+ hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
+ &cp);
} else {
- hci_auth_cfm(conn, ev->status);
-
- hci_conn_hold(conn);
- conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ conn->state = BT_CONNECTED;
+ hci_proto_connect_cfm(conn, ev->status);
hci_conn_put(conn);
}
+ } else {
+ hci_auth_cfm(conn, ev->status);
- if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) {
- if (!ev->status) {
- struct hci_cp_set_conn_encrypt cp;
- cp.handle = ev->handle;
- cp.encrypt = 0x01;
- hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT,
- sizeof(cp), &cp);
- } else {
- clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
- hci_encrypt_cfm(conn, ev->status, 0x00);
- }
+ hci_conn_hold(conn);
+ conn->disc_timeout = HCI_DISCONN_TIMEOUT;
+ hci_conn_put(conn);
+ }
+
+ if (test_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend)) {
+ if (!ev->status) {
+ struct hci_cp_set_conn_encrypt cp;
+ cp.handle = ev->handle;
+ cp.encrypt = 0x01;
+ hci_send_cmd(hdev, HCI_OP_SET_CONN_ENCRYPT, sizeof(cp),
+ &cp);
+ } else {
+ clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->pend);
+ hci_encrypt_cfm(conn, ev->status, 0x00);
}
}
+unlock:
hci_dev_unlock(hdev);
}
--
1.7.1
next reply other threads:[~2011-05-26 8:46 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-05-26 8:46 Waldemar Rymarkiewicz [this message]
2011-05-30 22:14 ` [PATCH v2] Bluetooth: Fix auth_complete_evt for legacy units Gustavo F. Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1306399608-10595-1-git-send-email-waldemar.rymarkiewicz@tieto.com \
--to=waldemar.rymarkiewicz@tieto.com \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=luiz.dentz@gmail.com \
--cc=padovan@profusion.mobi \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox