From: Emeltchenko Andrei <Andrei.Emeltchenko.news@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCHv5 4/4] Bluetooth: EWS: fix max_pdu calculation
Date: Mon, 17 Oct 2011 12:19:59 +0300 [thread overview]
Message-ID: <1318843199-18232-5-git-send-email-Andrei.Emeltchenko.news@gmail.com> (raw)
In-Reply-To: <1318843199-18232-1-git-send-email-Andrei.Emeltchenko.news@gmail.com>
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Fix max_pdu_size calculationin for RFC. Change magic number to human readable
defines.
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/l2cap_core.c | 42 ++++++++++++++++++++++++++++--------------
1 files changed, 28 insertions(+), 14 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 56df612..fb9fedc 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1947,6 +1947,7 @@ static int l2cap_build_conf_req(struct l2cap_chan *chan, void *data)
struct l2cap_conf_req *req = data;
struct l2cap_conf_rfc rfc = { .mode = chan->mode };
void *ptr = req->data;
+ u16 size;
BT_DBG("chan %p", chan);
@@ -1991,9 +1992,12 @@ done:
rfc.max_transmit = chan->max_tx;
rfc.retrans_timeout = 0;
rfc.monitor_timeout = 0;
- rfc.max_pdu_size = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
- if (L2CAP_DEFAULT_MAX_PDU_SIZE > chan->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
+
+ size = min_t(u16, L2CAP_DEFAULT_MAX_PDU_SIZE, chan->conn->mtu -
+ L2CAP_EXT_HDR_SIZE -
+ L2CAP_SDULEN_SIZE -
+ L2CAP_FCS_SIZE);
+ rfc.max_pdu_size = cpu_to_le16(size);
l2cap_txwin_setup(chan);
@@ -2023,9 +2027,12 @@ done:
rfc.max_transmit = 0;
rfc.retrans_timeout = 0;
rfc.monitor_timeout = 0;
- rfc.max_pdu_size = cpu_to_le16(L2CAP_DEFAULT_MAX_PDU_SIZE);
- if (L2CAP_DEFAULT_MAX_PDU_SIZE > chan->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
+
+ size = min_t(u16, L2CAP_DEFAULT_MAX_PDU_SIZE, chan->conn->mtu -
+ L2CAP_EXT_HDR_SIZE -
+ L2CAP_SDULEN_SIZE -
+ L2CAP_FCS_SIZE);
+ rfc.max_pdu_size = cpu_to_le16(size);
l2cap_add_conf_opt(&ptr, L2CAP_CONF_RFC, sizeof(rfc),
(unsigned long) &rfc);
@@ -2058,6 +2065,7 @@ static int l2cap_parse_conf_req(struct l2cap_chan *chan, void *data)
struct l2cap_conf_rfc rfc = { .mode = L2CAP_MODE_BASIC };
u16 mtu = L2CAP_DEFAULT_MTU;
u16 result = L2CAP_CONF_SUCCESS;
+ u16 size;
BT_DBG("chan %p", chan);
@@ -2167,10 +2175,13 @@ done:
chan->remote_max_tx = rfc.max_transmit;
- if (le16_to_cpu(rfc.max_pdu_size) > chan->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
-
- chan->remote_mps = le16_to_cpu(rfc.max_pdu_size);
+ size = min_t(u16, le16_to_cpu(rfc.max_pdu_size),
+ chan->conn->mtu -
+ L2CAP_EXT_HDR_SIZE -
+ L2CAP_SDULEN_SIZE -
+ L2CAP_FCS_SIZE);
+ rfc.max_pdu_size = cpu_to_le16(size);
+ chan->remote_mps = size;
rfc.retrans_timeout =
le16_to_cpu(L2CAP_DEFAULT_RETRANS_TO);
@@ -2185,10 +2196,13 @@ done:
break;
case L2CAP_MODE_STREAMING:
- if (le16_to_cpu(rfc.max_pdu_size) > chan->conn->mtu - 10)
- rfc.max_pdu_size = cpu_to_le16(chan->conn->mtu - 10);
-
- chan->remote_mps = le16_to_cpu(rfc.max_pdu_size);
+ size = min_t(u16, le16_to_cpu(rfc.max_pdu_size),
+ chan->conn->mtu -
+ L2CAP_EXT_HDR_SIZE -
+ L2CAP_SDULEN_SIZE -
+ L2CAP_FCS_SIZE);
+ rfc.max_pdu_size = cpu_to_le16(size);
+ chan->remote_mps = size;
set_bit(CONF_MODE_DONE, &chan->conf_state);
--
1.7.4.1
next prev parent reply other threads:[~2011-10-17 9:19 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-10-17 9:19 [PATCHv5 0/4] last chunks of EWS patch Emeltchenko Andrei
2011-10-17 9:19 ` [PATCHv5 1/4] Bluetooth: EWS: handling different Control fields Emeltchenko Andrei
2011-10-17 9:19 ` [PATCHv5 2/4] Bluetooth: EWS: support extended seq numbers Emeltchenko Andrei
2011-10-17 9:19 ` [PATCHv5 3/4] Bluetooth: EWS: remove magic numbers in l2cap Emeltchenko Andrei
2011-10-17 9:19 ` Emeltchenko Andrei [this message]
2011-10-17 20:05 ` [PATCHv5 4/4] Bluetooth: EWS: fix max_pdu calculation Gustavo Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1318843199-18232-5-git-send-email-Andrei.Emeltchenko.news@gmail.com \
--to=andrei.emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox