From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: padovan@profusion.mobi, pkrystad@codeaurora.org,
Andrei.Emeltchenko.news@gmail.com,
Mat Martineau <mathewm@codeaurora.org>
Subject: [PATCHv4 4/9] Bluetooth: Add AMP-related data and structures for channel signals
Date: Wed, 2 Nov 2011 16:18:31 -0700 [thread overview]
Message-ID: <1320275916-32103-5-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1320275916-32103-1-git-send-email-mathewm@codeaurora.org>
AMP channel creation and channel moves are coordinated using the L2CAP
signaling channel. These definitions cover the "create channel",
"move channel", and "move channel confirm" signals.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
include/net/bluetooth/l2cap.h | 54 +++++++++++++++++++++++++++++++++++++++-
1 files changed, 52 insertions(+), 2 deletions(-)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index 0b021c0..f822ab9 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -97,6 +97,12 @@ struct l2cap_conninfo {
#define L2CAP_ECHO_RSP 0x09
#define L2CAP_INFO_REQ 0x0a
#define L2CAP_INFO_RSP 0x0b
+#define L2CAP_CREATE_CHAN_REQ 0x0c
+#define L2CAP_CREATE_CHAN_RSP 0x0d
+#define L2CAP_MOVE_CHAN_REQ 0x0e
+#define L2CAP_MOVE_CHAN_RSP 0x0f
+#define L2CAP_MOVE_CHAN_CFM 0x10
+#define L2CAP_MOVE_CHAN_CFM_RSP 0x11
#define L2CAP_CONN_PARAM_UPDATE_REQ 0x12
#define L2CAP_CONN_PARAM_UPDATE_RSP 0x13
@@ -220,14 +226,15 @@ struct l2cap_conn_rsp {
#define L2CAP_CID_DYN_START 0x0040
#define L2CAP_CID_DYN_END 0xffff
-/* connect result */
+/* connect/create channel results */
#define L2CAP_CR_SUCCESS 0x0000
#define L2CAP_CR_PEND 0x0001
#define L2CAP_CR_BAD_PSM 0x0002
#define L2CAP_CR_SEC_BLOCK 0x0003
#define L2CAP_CR_NO_MEM 0x0004
+#define L2CAP_CR_BAD_AMP 0x0005
-/* connect status */
+/* connect/create channel status */
#define L2CAP_CS_NO_INFO 0x0000
#define L2CAP_CS_AUTHEN_PEND 0x0001
#define L2CAP_CS_AUTHOR_PEND 0x0002
@@ -322,6 +329,49 @@ struct l2cap_info_rsp {
__u8 data[0];
} __packed;
+struct l2cap_create_chan_req {
+ __le16 psm;
+ __le16 scid;
+ __u8 amp_id;
+} __packed;
+
+struct l2cap_create_chan_rsp {
+ __le16 dcid;
+ __le16 scid;
+ __le16 result;
+ __le16 status;
+} __packed;
+
+struct l2cap_move_chan_req {
+ __le16 icid;
+ __u8 dest_amp_id;
+} __packed;
+
+struct l2cap_move_chan_rsp {
+ __le16 icid;
+ __le16 result;
+} __packed;
+
+#define L2CAP_MR_SUCCESS 0x0000
+#define L2CAP_MR_PEND 0x0001
+#define L2CAP_MR_BAD_ID 0x0002
+#define L2CAP_MR_SAME_ID 0x0003
+#define L2CAP_MR_NOT_SUPP 0x0004
+#define L2CAP_MR_COLLISION 0x0005
+#define L2CAP_MR_NOT_ALLOWED 0x0006
+
+struct l2cap_move_chan_cfm {
+ __le16 icid;
+ __le16 result;
+} __packed;
+
+#define L2CAP_MC_CONFIRMED 0x0000
+#define L2CAP_MC_UNCONFIRMED 0x0001
+
+struct l2cap_move_chan_cfm_rsp {
+ __le16 icid;
+} __packed;
+
/* info type */
#define L2CAP_IT_CL_MTU 0x0001
#define L2CAP_IT_FEAT_MASK 0x0002
--
1.7.7.1
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
next prev parent reply other threads:[~2011-11-02 23:18 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 23:18 [PATCHv4 0/9] AMP interface and signal framework Mat Martineau
2011-11-02 23:18 ` [PATCHv4 1/9] Bluetooth: Add BT_CHANNEL_POLICY socket option Mat Martineau
2011-11-02 23:18 ` [PATCHv4 2/9] Bluetooth: Change scope of the enable_hs module parameter Mat Martineau
2011-11-02 23:18 ` [PATCHv4 3/9] Bluetooth: Add channel policy to getsockopt/setsockopt Mat Martineau
2011-11-02 23:18 ` Mat Martineau [this message]
2011-11-02 23:18 ` [PATCHv4 5/9] Bluetooth: Add signal handlers for channel creation Mat Martineau
2011-11-02 23:18 ` [PATCHv4 6/9] Bluetooth: Add definitions for L2CAP fixed channels Mat Martineau
2011-11-02 23:18 ` [PATCHv4 7/9] Bluetooth: Use symbolic values for the fixed channel map Mat Martineau
2011-11-02 23:18 ` [PATCHv4 8/9] Bluetooth: Add signal handlers for channel moves Mat Martineau
2011-11-02 23:18 ` [PATCHv4 9/9] Bluetooth: Guarantee BR-EDR device will be registered as hci0 Mat Martineau
2011-11-03 14:30 ` Gustavo Padovan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1320275916-32103-5-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=Andrei.Emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=padovan@profusion.mobi \
--cc=pkrystad@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).