From: Brian Gix <bgix@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: Brian Gix <bgix@codeaurora.org>
Subject: [PATCH-v5 2/6] Bluetooth: Add HCI User Passkey Req Evt handling
Date: Wed, 23 Nov 2011 08:28:34 -0800 [thread overview]
Message-ID: <1322065718-11570-3-git-send-email-bgix@codeaurora.org> (raw)
In-Reply-To: <1322065718-11570-1-git-send-email-bgix@codeaurora.org>
Some MITM scenarios require handling of the User Passkey Request event,
by querying the user, and passing the response back.
Signed-off-by: Brian Gix <bgix@codeaurora.org>
---
net/bluetooth/hci_event.c | 58 +++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 58 insertions(+), 0 deletions(-)
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index dfe6fbc..980da08 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -931,6 +931,37 @@ static void hci_cc_user_confirm_neg_reply(struct hci_dev *hdev,
hci_dev_unlock(hdev);
}
+static void hci_cc_user_passkey_reply(struct hci_dev *hdev, struct sk_buff *skb)
+{
+ struct hci_rp_user_confirm_reply *rp = (void *) skb->data;
+
+ BT_DBG("%s status 0x%x", hdev->name, rp->status);
+
+ hci_dev_lock(hdev);
+
+ if (test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_user_passkey_reply_complete(hdev, &rp->bdaddr,
+ rp->status);
+
+ hci_dev_unlock(hdev);
+}
+
+static void hci_cc_user_passkey_neg_reply(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_rp_user_confirm_reply *rp = (void *) skb->data;
+
+ BT_DBG("%s status 0x%x", hdev->name, rp->status);
+
+ hci_dev_lock(hdev);
+
+ if (test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_user_passkey_neg_reply_complete(hdev, &rp->bdaddr,
+ rp->status);
+
+ hci_dev_unlock(hdev);
+}
+
static void hci_cc_read_local_oob_data_reply(struct hci_dev *hdev,
struct sk_buff *skb)
{
@@ -2015,6 +2046,14 @@ static inline void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *sk
hci_cc_user_confirm_neg_reply(hdev, skb);
break;
+ case HCI_OP_USER_PASSKEY_REPLY:
+ hci_cc_user_passkey_reply(hdev, skb);
+ break;
+
+ case HCI_OP_USER_PASSKEY_NEG_REPLY:
+ hci_cc_user_passkey_neg_reply(hdev, skb);
+ break;
+
case HCI_OP_LE_SET_SCAN_ENABLE:
hci_cc_le_set_scan_enable(hdev, skb);
break;
@@ -2774,6 +2813,21 @@ unlock:
hci_dev_unlock(hdev);
}
+static inline void hci_user_passkey_request_evt(struct hci_dev *hdev,
+ struct sk_buff *skb)
+{
+ struct hci_ev_user_passkey_req *ev = (void *) skb->data;
+
+ BT_DBG("%s", hdev->name);
+
+ hci_dev_lock(hdev);
+
+ if (test_bit(HCI_MGMT, &hdev->flags))
+ mgmt_user_passkey_request(hdev, &ev->bdaddr);
+
+ hci_dev_unlock(hdev);
+}
+
static inline void hci_simple_pair_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
{
struct hci_ev_simple_pair_complete *ev = (void *) skb->data;
@@ -3113,6 +3167,10 @@ void hci_event_packet(struct hci_dev *hdev, struct sk_buff *skb)
hci_user_confirm_request_evt(hdev, skb);
break;
+ case HCI_EV_USER_PASSKEY_REQUEST:
+ hci_user_passkey_request_evt(hdev, skb);
+ break;
+
case HCI_EV_SIMPLE_PAIR_COMPLETE:
hci_simple_pair_complete_evt(hdev, skb);
break;
--
1.7.7.2
--
Brian Gix
bgix@codeaurora.org
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
next prev parent reply other threads:[~2011-11-23 16:28 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-23 16:28 [PATCH-v5 0/6] Bluetooth: Add MITM protection to LE-SMP Brian Gix
2011-11-23 16:28 ` [PATCH-v5 1/6] Bluetooth: Add User Passkey Response handling Brian Gix
2011-11-23 16:28 ` Brian Gix [this message]
2011-11-23 16:28 ` [PATCH-v5 3/6] Bluetooth: Cleanup blkcipher on SMP termination Brian Gix
2011-11-23 16:28 ` [PATCH-v5 4/6] Bluetooth: Centralize SMP pairing failure handling Brian Gix
2011-12-01 14:13 ` Gustavo Padovan
2011-11-23 16:28 ` [PATCH-v5 5/6] Bluetooth: Add MITM mechanism to LE-SMP Brian Gix
2011-12-01 14:11 ` Gustavo Padovan
2011-12-01 18:35 ` Brian Gix
2011-12-01 23:38 ` Gustavo Padovan
2011-11-23 16:28 ` [PATCH-v5 6/6] Bluetooth: Add SMP to User Passkey and Confirm Brian Gix
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1322065718-11570-3-git-send-email-bgix@codeaurora.org \
--to=bgix@codeaurora.org \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).