From: Peter Krystad <pkrystad@codeaurora.org>
To: linux-bluetooth@vger.kernel.org
Cc: Peter Krystad <pkrystad@codeaurora.org>
Subject: [PATCHv3 1/4] Add L2CAP Create/Move channel and A2MP definitions
Date: Mon, 12 Dec 2011 22:02:34 -0800 [thread overview]
Message-ID: <1323756157-15487-2-git-send-email-pkrystad@codeaurora.org> (raw)
In-Reply-To: <1323756157-15487-1-git-send-email-pkrystad@codeaurora.org>
---
lib/l2cap.h | 159 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++-
1 files changed, 158 insertions(+), 1 deletions(-)
diff --git a/lib/l2cap.h b/lib/l2cap.h
index 3880551..8832ee0 100644
--- a/lib/l2cap.h
+++ b/lib/l2cap.h
@@ -2,7 +2,7 @@
*
* BlueZ - Bluetooth protocol stack for Linux
*
- * Copyright (C) 2000-2001 Qualcomm Incorporated
+ * Copyright (c) 2000-2001, 2011, Code Aurora Forum. All rights reserved.
* Copyright (C) 2002-2003 Maxim Krasnyansky <maxk@qualcomm.com>
* Copyright (C) 2002-2010 Marcel Holtmann <marcel@holtmann.org>
*
@@ -82,6 +82,12 @@ struct l2cap_conninfo {
#define L2CAP_ECHO_RSP 0x09
#define L2CAP_INFO_REQ 0x0a
#define L2CAP_INFO_RSP 0x0b
+#define L2CAP_CREATE_REQ 0x0c
+#define L2CAP_CREATE_RSP 0x0d
+#define L2CAP_MOVE_REQ 0x0e
+#define L2CAP_MOVE_RSP 0x0f
+#define L2CAP_MOVE_CFM 0x10
+#define L2CAP_MOVE_CFM_RSP 0x11
/* L2CAP extended feature mask */
#define L2CAP_FEAT_FLOWCTL 0x00000001
@@ -270,6 +276,157 @@ typedef struct {
#define L2CAP_IR_SUCCESS 0x0000
#define L2CAP_IR_NOTSUPP 0x0001
+typedef struct {
+ uint16_t psm;
+ uint16_t scid;
+ uint8_t id;
+} __attribute__ ((packed)) l2cap_create_req;
+#define L2CAP_CREATE_REQ_SIZE 5
+
+typedef struct {
+ uint16_t dcid;
+ uint16_t scid;
+ uint16_t result;
+ uint16_t status;
+} __attribute__ ((packed)) l2cap_create_rsp;
+#define L2CAP_CREATE_RSP_SIZE 8
+
+typedef struct {
+ uint16_t icid;
+ uint8_t id;
+} __attribute__ ((packed)) l2cap_move_req;
+#define L2CAP_MOVE_REQ_SIZE 3
+
+typedef struct {
+ uint16_t icid;
+ uint16_t result;
+} __attribute__ ((packed)) l2cap_move_rsp;
+#define L2CAP_MOVE_RSP_SIZE 4
+
+typedef struct {
+ uint16_t icid;
+ uint16_t result;
+} __attribute__ ((packed)) l2cap_move_cfm;
+#define L2CAP_MOVE_CFM_SIZE 4
+
+typedef struct {
+ uint16_t icid;
+} __attribute__ ((packed)) l2cap_move_cfm_rsp;
+
+/* A2MP Protocol */
+
+/* A2MP command codes */
+
+#define A2MP_COMMAND_REJ 0x01
+#define A2MP_DISCOVER_REQ 0x02
+#define A2MP_DISCOVER_RSP 0x03
+#define A2MP_CHANGE_NOTIFY 0x04
+#define A2MP_CHANGE_RSP 0x05
+#define A2MP_INFO_REQ 0x06
+#define A2MP_INFO_RSP 0x07
+#define A2MP_ASSOC_REQ 0x08
+#define A2MP_ASSOC_RSP 0x09
+#define A2MP_CREATE_REQ 0x0a
+#define A2MP_CREATE_RSP 0x0b
+#define A2MP_DISCONN_REQ 0x0c
+#define A2MP_DISCONN_RSP 0x0d
+
+struct a2mp_hdr {
+ uint8_t code;
+ uint8_t ident;
+ uint16_t len;
+} __attribute__ ((packed));
+#define A2MP_HDR_SIZE 4
+
+struct a2mp_command_rej {
+ uint16_t reason;
+} __attribute__ ((packed));
+
+struct a2mp_discover_req {
+ uint16_t mtu;
+ uint16_t mask;
+} __attribute__ ((packed));
+
+struct a2mp_ctrl {
+ uint8_t id;
+ uint8_t type;
+ uint8_t status;
+} __attribute__ ((packed));
+
+struct a2mp_discover_rsp {
+ uint16_t mtu;
+ uint16_t mask;
+ struct a2mp_ctrl ctrl_list[0];
+} __attribute__ ((packed));
+
+struct a2mp_info_req {
+ uint8_t id;
+} __attribute__ ((packed));
+
+struct a2mp_info_rsp {
+ uint8_t id;
+ uint8_t status;
+ uint32_t total_bw;
+ uint32_t max_bw;
+ uint32_t min_latency;
+ uint16_t pal_caps;
+ uint16_t assoc_size;
+} __attribute__ ((packed));
+
+struct a2mp_assoc_req {
+ uint8_t id;
+} __attribute__ ((packed));
+
+struct a2mp_assoc_rsp {
+ uint8_t id;
+ uint8_t status;
+ uint8_t assoc_data[0];
+} __attribute__ ((packed));
+
+struct a2mp_create_req {
+ uint8_t local_id;
+ uint8_t remote_id;
+ uint8_t assoc_data[0];
+} __attribute__ ((packed));
+
+struct a2mp_create_rsp {
+ uint8_t local_id;
+ uint8_t remote_id;
+ uint8_t status;
+} __attribute__ ((packed));
+
+struct a2mp_disconn_req {
+ uint8_t local_id;
+ uint8_t remote_id;
+} __attribute__ ((packed));
+
+struct a2mp_disconn_rsp {
+ uint8_t local_id;
+ uint8_t remote_id;
+ uint8_t status;
+} __attribute__ ((packed));
+
+#define A2MP_COMMAND_NOT_RECOGNIZED 0x0000
+
+/* AMP controller status */
+#define AMP_CTRL_POWERED_DOWN 0x00
+#define AMP_CTRL_BLUETOOTH_ONLY 0x01
+#define AMP_CTRL_NO_CAPACITY 0x02
+#define AMP_CTRL_LOW_CAPACITY 0x03
+#define AMP_CTRL_MEDIUM_CAPACITY 0x04
+#define AMP_CTRL_HIGH_CAPACITY 0x05
+#define AMP_CTRL_FULL_CAPACITY 0x06
+
+/* A2MP response status */
+#define A2MP_STATUS_SUCCESS 0x00
+#define A2MP_STATUS_INVALID_CTRL_ID 0x01
+#define A2MP_STATUS_UNABLE_START_LINK_CREATION 0x02
+#define A2MP_STATUS_NO_PHYSICAL_LINK_EXISTS 0x02
+#define A2MP_STATUS_COLLISION_OCCURED 0x03
+#define A2MP_STATUS_DISCONN_REQ_RECVD 0x04
+#define A2MP_STATUS_PHYS_LINK_EXISTS 0x05
+#define A2MP_STATUS_SECURITY_VIOLATION 0x06
+
#ifdef __cplusplus
}
#endif
--
1.7.4.1
--
Peter Krystad
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
next prev parent reply other threads:[~2011-12-13 6:02 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-12-13 6:02 [PATCHv3 0/4] Add BT 3.0+HS parsing Peter Krystad
2011-12-13 6:02 ` Peter Krystad [this message]
2011-12-13 6:02 ` [PATCHv3 2/4] Add parsing of L2CAP Create/Move Channel signals Peter Krystad
2011-12-13 6:02 ` [PATCHv3 3/4] Add parsing of A2MP signals Peter Krystad
2011-12-13 6:02 ` [PATCHv3 4/4] Minor cleanup of indentation in output Peter Krystad
2012-01-04 10:18 ` [PATCHv3 0/4] Add BT 3.0+HS parsing Andrei Emeltchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1323756157-15487-2-git-send-email-pkrystad@codeaurora.org \
--to=pkrystad@codeaurora.org \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).