From: Andrei Emeltchenko <Andrei.Emeltchenko.news@gmail.com>
To: linux-bluetooth@vger.kernel.org
Subject: [RFCv6 09/26] Bluetooth: A2MP: Process A2MP messages
Date: Wed, 28 Mar 2012 16:31:32 +0300 [thread overview]
Message-ID: <1332941509-21345-10-git-send-email-Andrei.Emeltchenko.news@gmail.com> (raw)
In-Reply-To: <1332941509-21345-1-git-send-email-Andrei.Emeltchenko.news@gmail.com>
From: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Implement basic processing for AMP Manager Protocol (A2MP).
Example below shows processing unrecognized command.
...
> ACL data: handle 11 flags 0x02 dlen 12
A2MP: code 0x00 ident 3 len 0
< ACL data: handle 11 flags 0x00 dlen 14
A2MP: Command Reject: reason (0) - Command not recognized
...
Signed-off-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
---
net/bluetooth/a2mp.c | 62 ++++++++++++++++++++++++++++++++++++++++++++++++++
1 files changed, 62 insertions(+), 0 deletions(-)
diff --git a/net/bluetooth/a2mp.c b/net/bluetooth/a2mp.c
index 980382b..25d505e 100644
--- a/net/bluetooth/a2mp.c
+++ b/net/bluetooth/a2mp.c
@@ -65,6 +65,67 @@ static void a2mp_send(struct amp_mgr *mgr, u8 code, u8 ident, u16 len,
kfree(cmd);
}
+/* Handle A2MP signalling */
+static int a2mp_chan_recv_cb(void *data, struct sk_buff *skb)
+{
+ struct a2mp_cmd *hdr = (struct a2mp_cmd *) skb->data;
+ struct amp_mgr *mgr = data;
+ int err = 0;
+
+ amp_mgr_get(mgr);
+
+ while (skb->len >= sizeof(*hdr)) {
+ struct a2mp_cmd *hdr = (struct a2mp_cmd *) skb->data;
+ u16 len = le16_to_cpu(hdr->len);
+
+ BT_DBG("code 0x%02x id %d len %d", hdr->code, hdr->ident, len);
+
+ skb_pull(skb, sizeof(*hdr));
+
+ if (len > skb->len || !hdr->ident) {
+ err = -EINVAL;
+ break;
+ }
+
+ mgr->ident = hdr->ident;
+
+ switch (hdr->code) {
+ case A2MP_COMMAND_REJ:
+ case A2MP_DISCOVER_REQ:
+ case A2MP_CHANGE_NOTIFY:
+ case A2MP_GETINFO_REQ:
+ case A2MP_GETAMPASSOC_REQ:
+ case A2MP_CREATEPHYSLINK_REQ:
+ case A2MP_DISCONNPHYSLINK_REQ:
+ case A2MP_CHANGE_RSP:
+ case A2MP_DISCOVER_RSP:
+ case A2MP_GETINFO_RSP:
+ case A2MP_GETAMPASSOC_RSP:
+ case A2MP_CREATEPHYSLINK_RSP:
+ case A2MP_DISCONNPHYSLINK_RSP:
+ default:
+ BT_ERR("Unknown A2MP sig cmd 0x%2.2x", hdr->code);
+ err = -EINVAL;
+ break;
+ }
+ }
+
+ if (err) {
+ struct a2mp_cmd_rej rej;
+ rej.reason = cpu_to_le16(0);
+
+ a2mp_send(mgr, A2MP_COMMAND_REJ, hdr->ident, sizeof(rej), &rej);
+ }
+
+ /* Always free skb and return success error code to prevent
+ from sending L2CAP Disconnect over A2MP channel */
+ kfree_skb(skb);
+
+ amp_mgr_put(mgr);
+
+ return 0;
+}
+
static void a2mp_chan_state_change_cb(void *data, int state)
{
struct l2cap_chan *chan = data;
@@ -99,6 +160,7 @@ static struct sk_buff *a2mp_chan_alloc_skb_cb(struct l2cap_chan *chan,
static struct l2cap_ops a2mp_chan_ops = {
.name = "L2CAP A2MP channel",
+ .recv = a2mp_chan_recv_cb,
.state_change = a2mp_chan_state_change_cb,
.close = a2mp_chan_close_cb,
.alloc_skb = a2mp_chan_alloc_skb_cb,
--
1.7.9.1
next prev parent reply other threads:[~2012-03-28 13:31 UTC|newest]
Thread overview: 100+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-03-23 16:13 [RFCv5 00/26] RFC Bluetooth A2MP implementation Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 01/26] Bluetooth: Add set_err to state_change callback Andrei Emeltchenko
2012-03-25 16:48 ` Gustavo Padovan
2012-03-23 16:13 ` [RFCv5 02/26] Bluetooth: Lock sk only if exist in state_change Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 03/26] Bluetooth: A2MP: Create A2MP channel Andrei Emeltchenko
2012-03-25 17:12 ` Gustavo Padovan
2012-03-26 9:27 ` Andrei Emeltchenko
2012-03-27 15:54 ` Gustavo Padovan
2012-03-23 16:13 ` [RFCv5 04/26] Bluetooth: A2MP: AMP Manager basic functions Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 05/26] Bluetooth: A2MP: Build and Send msg helpers Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 06/26] Bluetooth: A2MP: Add chan callbacks Andrei Emeltchenko
2012-03-25 17:16 ` Gustavo Padovan
2012-03-26 11:59 ` Andrei Emeltchenko
2012-03-27 16:06 ` Gustavo Padovan
2012-03-23 16:13 ` [RFCv5 07/26] Bluetooth: A2MP: Definitions for A2MP commands Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 08/26] Bluetooth: A2MP: Define A2MP status codes Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 09/26] Bluetooth: A2MP: Process A2MP messages Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 10/26] Bluetooth: A2MP: Process A2MP Command Reject Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 11/26] Bluetooth: A2MP: Helper functions to count HCI devs Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 12/26] Bluetooth: A2MP: Process A2MP Discover Request Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 13/26] Bluetooth: A2MP: Process A2MP Change Notify Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 14/26] Bluetooth: A2MP: Process A2MP Get Info Request Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 15/26] Bluetooth: A2MP: Process A2MP Get AMP Assoc Request Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 16/26] Bluetooth: A2MP: Process A2MP Create Physlink Request Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 17/26] Bluetooth: A2MP: Process A2MP Disc " Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 18/26] Bluetooth: A2MP: Process A2MP Command Responses Andrei Emeltchenko
2012-03-23 16:13 ` [RFCv5 19/26] Bluetooth: A2MP: Handling fixed channels Andrei Emeltchenko
2012-03-23 16:14 ` [RFCv5 20/26] Bluetooth: A2MP: Manage incoming connections Andrei Emeltchenko
2012-03-23 16:14 ` [RFCv5 21/26] Bluetooth: physical link HCI interface to AMP Andrei Emeltchenko
2012-03-23 16:14 ` [RFCv5 22/26] Bluetooth: Define AMP controller statuses Andrei Emeltchenko
2012-03-23 16:14 ` [RFCv5 23/26] Bluetooth: General HCI callback implementation Andrei Emeltchenko
2012-03-23 16:14 ` [RFCv5 24/26] Bluetooth: Process HCI callbacks in a workqueue Andrei Emeltchenko
2012-03-23 16:14 ` [RFCv5 25/26] Bluetooth: AMP: Use HCI callback for Read AMP Info Andrei Emeltchenko
2012-03-23 16:14 ` [RFCv5 26/26] Bluetooth: AMP: Read Local Assoc support Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 00/26] RFC Bluetooth A2MP implementation Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 01/26] Bluetooth: Add Read Local AMP Info to init Andrei Emeltchenko
2012-04-06 22:38 ` Gustavo Padovan
2012-03-28 13:31 ` [RFCv6 02/26] Bluetooth: Adds set_default function in L2CAP setup Andrei Emeltchenko
2012-04-06 22:39 ` Gustavo Padovan
2012-03-28 13:31 ` [RFCv6 03/26] Bluetooth: A2MP: Create A2MP channel Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 04/26] Bluetooth: A2MP: AMP Manager basic functions Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 05/26] Bluetooth: A2MP: Build and Send msg helpers Andrei Emeltchenko
2012-04-06 22:44 ` Gustavo Padovan
2012-04-11 13:33 ` Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 06/26] Bluetooth: A2MP: Add chan callbacks Andrei Emeltchenko
2012-04-06 23:20 ` Gustavo Padovan
2012-04-12 8:00 ` Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 07/26] Bluetooth: A2MP: Definitions for A2MP commands Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 08/26] Bluetooth: A2MP: Define A2MP status codes Andrei Emeltchenko
2012-03-28 13:31 ` Andrei Emeltchenko [this message]
2012-03-28 13:31 ` [RFCv6 10/26] Bluetooth: A2MP: Process A2MP Command Reject Andrei Emeltchenko
2012-04-06 23:23 ` Gustavo Padovan
2012-04-12 8:06 ` Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 11/26] Bluetooth: A2MP: Helper functions to count HCI devs Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 12/26] Bluetooth: A2MP: Process A2MP Discover Request Andrei Emeltchenko
2012-04-06 23:55 ` Gustavo Padovan
2012-03-28 13:31 ` [RFCv6 13/26] Bluetooth: A2MP: Process A2MP Change Notify Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 14/26] Bluetooth: A2MP: Process A2MP Get Info Request Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 15/26] Bluetooth: A2MP: Process A2MP Get AMP Assoc Request Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 16/26] Bluetooth: A2MP: Process A2MP Create Physlink Request Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 17/26] Bluetooth: A2MP: Process A2MP Disc " Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 18/26] Bluetooth: A2MP: Process A2MP Command Responses Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 19/26] Bluetooth: A2MP: Handling fixed channels Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 20/26] Bluetooth: A2MP: Manage incoming connections Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 21/26] Bluetooth: physical link HCI interface to AMP Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 22/26] Bluetooth: Define AMP controller statuses Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 23/26] Bluetooth: General HCI callback implementation Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 24/26] Bluetooth: Process HCI callbacks in a workqueue Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 25/26] Bluetooth: AMP: Use HCI callback for Read AMP Info Andrei Emeltchenko
2012-03-28 13:31 ` [RFCv6 26/26] Bluetooth: AMP: Read Local Assoc support Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 00/23] RFC Bluetooth A2MP implementation Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 01/23] Bluetooth: A2MP: Create A2MP channel Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 02/23] Bluetooth: A2MP: AMP Manager basic functions Andrei Emeltchenko
2012-04-20 14:51 ` Ulisses Furquim
2012-04-23 7:22 ` Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 03/23] Bluetooth: A2MP: Build and Send msg helpers Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 04/23] Bluetooth: A2MP: Add chan callbacks Andrei Emeltchenko
2012-04-20 14:09 ` Ulisses Furquim
2012-04-23 7:26 ` Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 05/23] Bluetooth: A2MP: Definitions for A2MP commands Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 06/23] Bluetooth: A2MP: Define A2MP status codes Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 07/23] Bluetooth: A2MP: Process A2MP messages Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 08/23] Bluetooth: A2MP: Process A2MP Command Reject Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 09/23] Bluetooth: A2MP: Process A2MP Discover Request Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 10/23] Bluetooth: A2MP: Process A2MP Change Notify Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 11/23] Bluetooth: A2MP: Process A2MP Get Info Request Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 12/23] Bluetooth: A2MP: Process A2MP Get AMP Assoc Request Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 13/23] Bluetooth: A2MP: Process A2MP Create Physlink Request Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 14/23] Bluetooth: A2MP: Process A2MP Disc " Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 15/23] Bluetooth: A2MP: Process A2MP Command Responses Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 16/23] Bluetooth: A2MP: Handling fixed channels Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 17/23] Bluetooth: A2MP: Manage incoming connections Andrei Emeltchenko
2012-04-25 19:58 ` Gustavo Padovan
2012-04-26 8:29 ` Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 18/23] Bluetooth: physical link HCI interface to AMP Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 19/23] Bluetooth: Define AMP controller statuses Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 20/23] Bluetooth: General HCI callback implementation Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 21/23] Bluetooth: Process HCI callbacks in a workqueue Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 22/23] Bluetooth: AMP: Use HCI callback for Read AMP Info Andrei Emeltchenko
2012-04-20 11:09 ` [RFCv7 23/23] Bluetooth: AMP: Read Local Assoc support Andrei Emeltchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1332941509-21345-10-git-send-email-Andrei.Emeltchenko.news@gmail.com \
--to=andrei.emeltchenko.news@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).