From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org, gustavo@padovan.org,
Andrei.Emeltchenko.news@gmail.com
Cc: pkrystad@codeaurora.org
Subject: [RFCv0 07/21] Bluetooth: Add new ERTM receive states for channel move
Date: Wed, 25 Jul 2012 16:50:59 -0700 [thread overview]
Message-ID: <1343260274-11953-8-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1343260274-11953-1-git-send-email-mathewm@codeaurora.org>
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap_core.c | 107 +++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 107 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index b71d62f..a327f02 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -974,6 +974,7 @@ static void l2cap_send_conn_req(struct l2cap_chan *chan)
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_REQ, sizeof(req), &req);
}
+
static void l2cap_move_setup(struct l2cap_chan *chan)
{
struct sk_buff *skb;
@@ -5145,6 +5146,106 @@ static int l2cap_rx_state_srej_sent(struct l2cap_chan *chan,
return err;
}
+static int l2cap_finish_move(struct l2cap_chan *chan)
+{
+ int err = 0;
+
+ BT_DBG("chan %p", chan);
+
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->rx_state = L2CAP_RX_STATE_RECV;
+
+ if (chan->hs_hcon)
+ chan->conn->mtu = chan->hs_hcon->hdev->acl_mtu;
+ else
+ chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
+
+ /* Placeholder - resegment based on new conn->mtu */
+ /*err = l2cap_resegment(chan);*/
+
+ return err;
+}
+
+static int l2cap_rx_state_wait_p(struct l2cap_chan *chan,
+ struct l2cap_ctrl *control,
+ struct sk_buff *skb, u8 event)
+{
+ int err = -EPROTO;
+
+ BT_DBG("chan %p, control %p, skb %p, event %d", chan, control, skb,
+ event);
+
+ if (!control->poll)
+ return err;
+
+ l2cap_process_reqseq(chan, control->reqseq);
+
+ if (!skb_queue_empty(&chan->tx_q))
+ chan->tx_send_head = skb_peek(&chan->tx_q);
+ else
+ chan->tx_send_head = NULL;
+
+ /* Rewind next_tx_seq to the point expected
+ * by the receiver.
+ */
+ chan->next_tx_seq = control->reqseq;
+ chan->unacked_frames = 0;
+
+ err = l2cap_finish_move(chan);
+
+ if (err)
+ return err;
+
+ set_bit(CONN_SEND_FBIT, &chan->conn_state);
+ l2cap_send_i_or_rr_or_rnr(chan);
+
+ if (event == L2CAP_EV_RECV_IFRAME)
+ err = -EPROTO;
+ else
+ err = l2cap_rx_state_recv(chan, control, NULL, event);
+
+ return err;
+}
+
+static int l2cap_rx_state_wait_f(struct l2cap_chan *chan,
+ struct l2cap_ctrl *control,
+ struct sk_buff *skb, u8 event)
+{
+ int err = -EPROTO;
+
+ if (control->final) {
+ clear_bit(CONN_REMOTE_BUSY, &chan->conn_state);
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+
+ chan->rx_state = L2CAP_RX_STATE_RECV;
+ l2cap_process_reqseq(chan, control->reqseq);
+
+ if (!skb_queue_empty(&chan->tx_q))
+ chan->tx_send_head = skb_peek(&chan->tx_q);
+ else
+ chan->tx_send_head = NULL;
+
+ /* Rewind next_tx_seq to the point expected
+ * by the receiver.
+ */
+ chan->next_tx_seq = control->reqseq;
+ chan->unacked_frames = 0;
+
+ if (chan->hs_hcon)
+ chan->conn->mtu = chan->hs_hcon->hdev->acl_mtu;
+ else
+ chan->conn->mtu = chan->conn->hcon->hdev->acl_mtu;
+
+ /* Placeholder - resegment based on new conn->mtu */
+ /*err = l2cap_resegment(chan);*/
+
+ if (!err)
+ err = l2cap_rx_state_recv(chan, control, skb, event);
+ }
+
+ return err;
+}
+
static bool __valid_reqseq(struct l2cap_chan *chan, u16 reqseq)
{
/* Make sure reqseq is for a packet that has been sent but not acked */
@@ -5171,6 +5272,12 @@ static int l2cap_rx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
err = l2cap_rx_state_srej_sent(chan, control, skb,
event);
break;
+ case L2CAP_RX_STATE_WAIT_P:
+ err = l2cap_rx_state_wait_p(chan, control, skb, event);
+ break;
+ case L2CAP_RX_STATE_WAIT_F:
+ err = l2cap_rx_state_wait_f(chan, control, skb, event);
+ break;
default:
/* shut it down */
break;
--
1.7.11.2
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum
next prev parent reply other threads:[~2012-07-25 23:50 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-07-25 23:50 [RFCv0 00/21] L2CAP signaling for AMP channel create/move Mat Martineau
2012-07-25 23:50 ` [RFCv0 01/21] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-07-25 23:50 ` [RFCv0 02/21] Bluetooth: Factor out common L2CAP connection code Mat Martineau
2012-07-25 23:50 ` [RFCv0 03/21] Bluetooth: Add L2CAP create channel request handling Mat Martineau
2012-07-26 13:13 ` Andrei Emeltchenko
2012-07-26 15:04 ` Mat Martineau
2012-07-26 19:43 ` Andrei Emeltchenko
2012-07-25 23:50 ` [RFCv0 04/21] Bluetooth: Process create response and connect response identically Mat Martineau
2012-08-14 10:12 ` Andrei Emeltchenko
2012-08-14 17:25 ` Mat Martineau
2012-07-25 23:50 ` [RFCv0 05/21] Bluetooth: Lookup channel id for channel move Mat Martineau
2012-07-26 13:30 ` Andrei Emeltchenko
2012-07-26 15:07 ` Mat Martineau
2012-07-25 23:50 ` [RFCv0 06/21] Bluetooth: Channel move request handling Mat Martineau
2012-07-26 13:59 ` Andrei Emeltchenko
2012-07-27 16:54 ` Mat Martineau
2012-08-06 8:44 ` Andrei Emeltchenko
2012-08-06 16:33 ` Mat Martineau
2012-08-07 8:31 ` Andrei Emeltchenko
2012-07-25 23:50 ` Mat Martineau [this message]
2012-07-25 23:51 ` [RFCv0 08/21] Bluetooth: Add move channel confirm handling Mat Martineau
2012-07-26 14:28 ` Andrei Emeltchenko
2012-07-26 15:16 ` Mat Martineau
2012-07-25 23:51 ` [RFCv0 09/21] Bluetooth: Move channel response Mat Martineau
2012-07-25 23:51 ` [RFCv0 10/21] Bluetooth: Add logical link confirm Mat Martineau
2012-07-26 14:41 ` Andrei Emeltchenko
2012-07-26 15:24 ` Mat Martineau
2012-07-25 23:51 ` [RFCv0 11/21] Bluetooth: Add move confirm response handling Mat Martineau
2012-07-26 14:45 ` Andrei Emeltchenko
2012-07-26 15:33 ` Mat Martineau
2012-07-25 23:51 ` [RFCv0 12/21] Bluetooth: Add state to hci_chan Mat Martineau
2012-07-26 19:54 ` Andrei Emeltchenko
2012-07-25 23:51 ` [RFCv0 13/21] Bluetooth: Indentation fixes Mat Martineau
2012-07-25 23:51 ` [RFCv0 14/21] Bluetooth: Handle physical link completion Mat Martineau
2012-08-15 13:51 ` Andrei Emeltchenko
2012-08-15 16:56 ` Mat Martineau
2012-08-16 7:23 ` Andrei Emeltchenko
2012-07-25 23:51 ` [RFCv0 15/21] Bluetooth: Enable data sends on AMP controller Mat Martineau
2012-07-25 23:51 ` [RFCv0 16/21] Bluetooth: Do not send data during channel move Mat Martineau
2012-07-25 23:51 ` [RFCv0 17/21] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
2012-07-25 23:51 ` [RFCv0 18/21] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
2012-07-25 23:51 ` [RFCv0 19/21] Bluetooth: Tie AMP link setup to connect/disconnect Mat Martineau
2012-07-25 23:51 ` [RFCv0 20/21] Bluetooth: Do not process ERTM reject during move Mat Martineau
2012-07-25 23:51 ` [RFCv0 21/21] Bluetooth: Start channel move when socket option is changed Mat Martineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1343260274-11953-8-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=Andrei.Emeltchenko.news@gmail.com \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=pkrystad@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).