From: <chen.ganir@ti.com>
To: <linux-bluetooth@vger.kernel.org>
Cc: <chen.ganir@ti.com>
Subject: [PATCH v5] gatt: Translate Characteristic names
Date: Mon, 3 Sep 2012 16:20:03 +0300 [thread overview]
Message-ID: <1346678403-14322-1-git-send-email-chen.ganir@ti.com> (raw)
From: Chen Ganir <chen.ganir@ti.com>
Translate Characteristic UUID's to name. This list was taken from
the Bluetooth SIG developer site.
---
attrib/client.c | 78 ++++++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 75 insertions(+), 3 deletions(-)
diff --git a/attrib/client.c b/attrib/client.c
index 906d345..479aac3 100644
--- a/attrib/client.c
+++ b/attrib/client.c
@@ -106,8 +106,79 @@ struct watcher {
struct gatt_service *gatt;
};
+struct characteristic_info {
+ const char *uuid;
+ const char *name;
+};
+
+static const struct characteristic_info charInfo[] = {
+ { "00002a43-0000-1000-8000-00805f9b34fb", "Alert Category ID" },
+ { "00002a42-0000-1000-8000-00805f9b34fb", "Alert Category ID Bit Mask" },
+ { "00002a06-0000-1000-8000-00805f9b34fb", "Alert Level" },
+ { "00002a44-0000-1000-8000-00805f9b34fb", "Alert Notification Control Point" },
+ { "00002a3f-0000-1000-8000-00805f9b34fb", "Alert Status" },
+ { "00002a01-0000-1000-8000-00805f9b34fb", "Appearance" },
+ { "00002a49-0000-1000-8000-00805f9b34fb", "Blood Pressure Feature" },
+ { "00002a35-0000-1000-8000-00805f9b34fb", "Blood Pressure Measurement" },
+ { "00002a38-0000-1000-8000-00805f9b34fb", "Body Sensor Location" },
+ { "00002a2b-0000-1000-8000-00805f9b34fb", "Current Time" },
+ { "00002a08-0000-1000-8000-00805f9b34fb", "Date Time" },
+ { "00002a0a-0000-1000-8000-00805f9b34fb", "Day Date Time" },
+ { "00002a09-0000-1000-8000-00805f9b34fb", "Day of Week" },
+ { "00002a00-0000-1000-8000-00805f9b34fb", "Device Name" },
+ { "00002a0d-0000-1000-8000-00805f9b34fb", "DST Offset" },
+ { "00002a0c-0000-1000-8000-00805f9b34fb", "Exact Time 256" },
+ { "00002a26-0000-1000-8000-00805f9b34fb", "Firmware Revision String" },
+ { "00002a27-0000-1000-8000-00805f9b34fb", "Hardware Revision String" },
+ { "00002a39-0000-1000-8000-00805f9b34fb", "Heart Rate Control Point" },
+ { "00002a37-0000-1000-8000-00805f9b34fb", "Heart Rate Measurement" },
+ { "00002a2a-0000-1000-8000-00805f9b34fb", "IEEE 11073-20601 Regulatory" },
+ { "00002a36-0000-1000-8000-00805f9b34fb", "Intermediate Cuff Pressure" },
+ { "00002a1e-0000-1000-8000-00805f9b34fb", "Intermediate Temperature" },
+ { "00002a0f-0000-1000-8000-00805f9b34fb", "Local Time Information" },
+ { "00002a29-0000-1000-8000-00805f9b34fb", "Manufacturer Name String" },
+ { "00002a21-0000-1000-8000-00805f9b34fb", "Measurement Interval" },
+ { "00002a24-0000-1000-8000-00805f9b34fb", "Model Number String" },
+ { "00002a46-0000-1000-8000-00805f9b34fb", "New Alert" },
+ { "00002a04-0000-1000-8000-00805f9b34fb", "Peripheral Preferred Connection Parameters" },
+ { "00002a02-0000-1000-8000-00805f9b34fb", "Peripheral Privacy Flag" },
+ { "00002a03-0000-1000-8000-00805f9b34fb", "Reconnection Address" },
+ { "00002a14-0000-1000-8000-00805f9b34fb", "Reference Time Information" },
+ { "00002a40-0000-1000-8000-00805f9b34fb", "Ringer Control Point" },
+ { "00002a41-0000-1000-8000-00805f9b34fb", "Ringer Setting" },
+ { "00002a25-0000-1000-8000-00805f9b34fb", "Serial Number String" },
+ { "00002a05-0000-1000-8000-00805f9b34fb", "Service Changed" },
+ { "00002a28-0000-1000-8000-00805f9b34fb", "Software Revision String" },
+ { "00002a47-0000-1000-8000-00805f9b34fb", "Supported New Alert Category" },
+ { "00002a48-0000-1000-8000-00805f9b34fb", "Supported Unread Alert Category" },
+ { "00002a23-0000-1000-8000-00805f9b34fb", "System ID" },
+ { "00002a1c-0000-1000-8000-00805f9b34fb", "Temperature Measurement" },
+ { "00002a1d-0000-1000-8000-00805f9b34fb", "Temperature Type" },
+ { "00002a12-0000-1000-8000-00805f9b34fb", "Time Accuracy" },
+ { "00002a13-0000-1000-8000-00805f9b34fb", "Time Source" },
+ { "00002a16-0000-1000-8000-00805f9b34fb", "Time Update Control Point" },
+ { "00002a17-0000-1000-8000-00805f9b34fb", "Time Update State" },
+ { "00002a11-0000-1000-8000-00805f9b34fb", "Time with DST" },
+ { "00002a0e-0000-1000-8000-00805f9b34fb", "Time Zone" },
+ { "00002a07-0000-1000-8000-00805f9b34fb", "Tx Power Level" },
+ { "00002a45-0000-1000-8000-00805f9b34fb", "Unread Alert Status" },
+ { }
+};
+
static GSList *gatt_services = NULL;
+static const char *get_char_name(const char *uuid)
+{
+ const struct characteristic_info *c;
+
+ for (c = charInfo; c->uuid; c++) {
+ if (bt_uuid_strcmp(c->uuid, uuid) == 0)
+ return c->name;
+ }
+
+ return NULL;
+}
+
static void characteristic_free(void *user_data)
{
struct characteristic *chr = user_data;
@@ -191,7 +262,7 @@ static int watcher_cmp(gconstpointer a, gconstpointer b)
static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
{
DBusMessageIter dict;
- const char *name = "";
+ const char *name;
char *uuid;
dbus_message_iter_open_container(iter, DBUS_TYPE_ARRAY,
@@ -203,8 +274,9 @@ static void append_char_dict(DBusMessageIter *iter, struct characteristic *chr)
dict_append_entry(&dict, "UUID", DBUS_TYPE_STRING, &uuid);
g_free(uuid);
- /* FIXME: Translate UUID to name. */
- dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
+ name = get_char_name(chr->type);
+ if (name)
+ dict_append_entry(&dict, "Name", DBUS_TYPE_STRING, &name);
if (chr->desc)
dict_append_entry(&dict, "Description", DBUS_TYPE_STRING,
--
1.7.9.5
reply other threads:[~2012-09-03 13:20 UTC|newest]
Thread overview: [no followups] expand[flat|nested] mbox.gz Atom feed
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1346678403-14322-1-git-send-email-chen.ganir@ti.com \
--to=chen.ganir@ti.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox