From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org, gustavo@padovan.org
Cc: sunnyk@codeaurora.org, marcel@holtmann.org
Subject: [PATCH 17/19] Bluetooth: Send create channel request instead of connect for AMP
Date: Mon, 15 Oct 2012 08:34:06 -0700 [thread overview]
Message-ID: <1350315248-7690-18-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1350315248-7690-1-git-send-email-mathewm@codeaurora.org>
When the channel policy is set to prefer AMP, then an L2CAP channel is
set up using the "create channel" command rather than the "connect"
command. A physical link is also set up before sending "create
channel".
Behavior is unchanged if enable_hs is false.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap_core.c | 42 ++++++++++++++++++++++++++++++++++++++++++
1 file changed, 42 insertions(+)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 3b142a0..57b1b02 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -58,6 +58,9 @@ static void l2cap_send_disconn_req(struct l2cap_conn *conn,
static void l2cap_tx(struct l2cap_chan *chan, struct l2cap_ctrl *control,
struct sk_buff_head *skbs, u8 event);
+static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
+ u8 status);
+
/* ---- L2CAP channels ---- */
static struct l2cap_chan *__l2cap_get_chan_by_dcid(struct l2cap_conn *conn,
@@ -562,6 +565,13 @@ void l2cap_chan_del(struct l2cap_chan *chan, int err)
mgr->bredr_chan = NULL;
}
+ if (chan->hs_hchan) {
+ chan->hs_hchan = NULL;
+ chan->hs_hcon = NULL;
+
+ /* Placeholder - free logical link */
+ }
+
chan->ops->teardown(chan, err);
if (test_bit(CONF_NOT_COMPLETE, &chan->conf_state))
@@ -1108,6 +1118,7 @@ static void l2cap_start_connection(struct l2cap_chan *chan)
{
if (__amp_capable(chan)) {
BT_DBG("chan %p AMP capable: discover AMPs", chan);
+ set_bit(CONF_CONNECT_PEND, &chan->conf_state);
a2mp_discover_amp(chan);
} else {
l2cap_send_conn_req(chan);
@@ -1253,6 +1264,16 @@ static void l2cap_conn_start(struct l2cap_conn *conn)
rsp.status = __constant_cpu_to_le16(L2CAP_CS_AUTHEN_PEND);
}
+ if (rsp.result == __constant_cpu_to_le16(L2CAP_CR_SUCCESS) &&
+ chan->local_amp_id) {
+ /* Placeholder - uncomment when amp functions
+ * are available
+ amp_accept_physical(chan, chan->local_amp_id);
+ */
+ l2cap_chan_unlock(chan);
+ continue;
+ }
+
l2cap_send_cmd(conn, chan->ident, L2CAP_CONN_RSP,
sizeof(rsp), &rsp);
@@ -3344,6 +3365,18 @@ done:
rfc.mode = chan->mode;
}
+ if (test_bit(CONF_LOC_CONF_PEND, &chan->conf_state) &&
+ chan->local_amp_id) {
+ struct hci_chan *hchan = NULL;
+
+ /* Placeholder - get hci_chan for logical link */
+
+ if (hchan && hchan->state == BT_CONNECTED) {
+ l2cap_logical_cfm(chan, hchan,
+ L2CAP_MR_SUCCESS);
+ }
+ }
+
if (result == L2CAP_CONF_SUCCESS)
set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
}
@@ -6354,6 +6387,15 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
stat = L2CAP_CS_AUTHOR_PEND;
chan->ops->defer(chan);
} else {
+ if (chan->local_amp_id) {
+ /* Placeholder - accept physical
+ * link
+ amp_accept_physical(chan,
+ chan->local_amp_id);
+ */
+ continue;
+ }
+
__l2cap_state_change(chan, BT_CONFIG);
res = L2CAP_CR_SUCCESS;
stat = L2CAP_CS_NO_INFO;
--
1.7.12.3
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2012-10-15 15:34 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-15 15:33 [PATCH 00/19] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-15 15:33 ` [PATCH 01/19] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-10-15 15:33 ` [PATCH 02/19] Bluetooth: Add L2CAP create channel request handling Mat Martineau
2012-10-15 15:33 ` [PATCH 03/19] Bluetooth: Remove unnecessary intermediate function Mat Martineau
2012-10-15 18:10 ` Marcel Holtmann
2012-10-15 15:33 ` [PATCH 04/19] Bluetooth: Lookup channel structure based on DCID Mat Martineau
2012-10-15 18:13 ` Marcel Holtmann
2012-10-15 15:33 ` [PATCH 05/19] Bluetooth: Channel move request handling Mat Martineau
2012-10-15 18:17 ` Marcel Holtmann
2012-10-16 10:18 ` Andrei Emeltchenko
2012-10-15 15:33 ` [PATCH 06/19] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
2012-10-15 18:23 ` Marcel Holtmann
2012-10-16 10:21 ` Andrei Emeltchenko
2012-10-15 15:33 ` [PATCH 07/19] Bluetooth: Add move channel confirm handling Mat Martineau
2012-10-15 18:25 ` Marcel Holtmann
2012-10-16 17:30 ` Mat Martineau
2012-10-17 17:10 ` Marcel Holtmann
2012-10-16 10:27 ` Andrei Emeltchenko
2012-10-16 23:00 ` Mat Martineau
2012-10-15 15:33 ` [PATCH 08/19] Bluetooth: Add state to hci_chan Mat Martineau
2012-10-15 18:26 ` Marcel Holtmann
2012-10-15 15:33 ` [PATCH 09/19] Bluetooth: Move channel response Mat Martineau
2012-10-15 18:29 ` Marcel Holtmann
2012-10-16 17:56 ` Mat Martineau
2012-10-15 15:33 ` [PATCH 10/19] Bluetooth: Add logical link confirm Mat Martineau
2012-10-15 18:37 ` Marcel Holtmann
2012-10-16 10:38 ` Andrei Emeltchenko
2012-10-16 22:25 ` Mat Martineau
2012-10-15 15:34 ` [PATCH 11/19] Bluetooth: Add move confirm response handling Mat Martineau
2012-10-15 18:38 ` Marcel Holtmann
2012-10-15 15:34 ` [PATCH 12/19] Bluetooth: Handle physical link completion Mat Martineau
2012-10-15 18:40 ` Marcel Holtmann
2012-10-15 15:34 ` [PATCH 13/19] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
2012-10-15 18:41 ` Marcel Holtmann
2012-10-15 15:34 ` [PATCH 14/19] Bluetooth: Do not send data during channel move Mat Martineau
2012-10-15 18:42 ` Marcel Holtmann
2012-10-16 10:50 ` Andrei Emeltchenko
2012-10-15 15:34 ` [PATCH 15/19] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
2012-10-15 18:44 ` Marcel Holtmann
2012-10-15 15:34 ` [PATCH 16/19] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
2012-10-15 15:34 ` Mat Martineau [this message]
2012-10-15 15:34 ` [PATCH 18/19] Bluetooth: Do not retransmit data during a channel move Mat Martineau
2012-10-15 18:46 ` Marcel Holtmann
2012-10-15 15:34 ` [PATCH 19/19] Bluetooth: Start channel move when socket option is changed Mat Martineau
2012-10-15 18:47 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350315248-7690-18-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=sunnyk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).