From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org, gustavo@padovan.org
Cc: sunnyk@codeaurora.org, marcel@holtmann.org,
andrei.emeltchenko.news@gmail.com
Subject: [PATCHv4 10/18] Bluetooth: Add logical link confirm
Date: Fri, 19 Oct 2012 14:34:01 -0700 [thread overview]
Message-ID: <1350682449-24818-11-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1350682449-24818-1-git-send-email-mathewm@codeaurora.org>
The logical link confirm callback is executed when the AMP controller
completes its logical link setup. During a channel move, a newly
formed logical link allows a move responder to send a move channel
response. A move initiator will send a move channel confirm. A
failed logical link will end the channel move and send an appropriate
response or confirm command indicating a failure.
If the channel is being created on an AMP controller, L2CAP
configuration is completed after the logical link is set up.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
---
net/bluetooth/l2cap_core.c | 124 ++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 116 insertions(+), 8 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index 69d43c9..0edc955 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -3799,6 +3799,7 @@ static inline int l2cap_config_req(struct l2cap_conn *conn,
goto unlock;
}
+ chan->ident = cmd->ident;
l2cap_send_cmd(conn, cmd->ident, L2CAP_CONF_RSP, len, rsp);
chan->num_conf_rsp++;
@@ -4198,17 +4199,17 @@ static int l2cap_create_channel_req(struct l2cap_conn *conn,
return 0;
}
-static void l2cap_send_move_chan_rsp(struct l2cap_conn *conn, u8 ident,
- u16 icid, u16 result)
+static void l2cap_send_move_chan_rsp(struct l2cap_chan *chan, u16 result)
{
struct l2cap_move_chan_rsp rsp;
- BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
+ BT_DBG("chan %p, result 0x%4.4x", chan, result);
- rsp.icid = cpu_to_le16(icid);
+ rsp.icid = cpu_to_le16(chan->dcid);
rsp.result = cpu_to_le16(result);
- l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_RSP, sizeof(rsp), &rsp);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_MOVE_CHAN_RSP,
+ sizeof(rsp), &rsp);
}
static void l2cap_send_move_chan_cfm(struct l2cap_chan *chan, u16 result)
@@ -4260,11 +4261,114 @@ static void __release_logical_link(struct l2cap_chan *chan)
/* Placeholder - release the logical link */
}
+static void l2cap_logical_fail(struct l2cap_chan *chan)
+{
+ /* Logical link setup failed */
+ if (chan->state != BT_CONNECTED) {
+ /* Create channel failure, disconnect */
+ l2cap_send_disconn_req(chan->conn, chan, ECONNRESET);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ l2cap_move_revert(chan);
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->move_state = L2CAP_MOVE_STABLE;
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_NOT_SUPP);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ if (chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_COMP ||
+ chan->move_state == L2CAP_MOVE_WAIT_LOGICAL_CFM) {
+ /* Remote has only sent pending or
+ * success responses, clean up
+ */
+ l2cap_move_revert(chan);
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+ chan->move_state = L2CAP_MOVE_STABLE;
+ }
+
+ /* Other amp move states imply that the move
+ * has already aborted
+ */
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_UNCONFIRMED);
+ }
+
+ __release_logical_link(chan);
+}
+
+static void l2cap_logical_finish_create(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
+ struct l2cap_conf_rsp rsp;
+ u8 code;
+
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ code = l2cap_build_conf_rsp(chan, &rsp,
+ L2CAP_CONF_SUCCESS, 0);
+ l2cap_send_cmd(chan->conn, chan->ident, L2CAP_CONF_RSP, code,
+ &rsp);
+ set_bit(CONF_OUTPUT_DONE, &chan->conf_state);
+
+ if (test_bit(CONF_INPUT_DONE, &chan->conf_state)) {
+ int err = 0;
+
+ set_default_fcs(chan);
+
+ err = l2cap_ertm_init(chan);
+ if (err < 0)
+ l2cap_send_disconn_req(chan->conn, chan, -err);
+ else
+ l2cap_chan_ready(chan);
+ }
+}
+
+static void l2cap_logical_finish_move(struct l2cap_chan *chan,
+ struct hci_chan *hchan)
+{
+ chan->hs_hcon = hchan->conn;
+ chan->hs_hcon->l2cap_data = chan->conn;
+
+ BT_DBG("move_state %d", chan->move_state);
+
+ switch (chan->move_state) {
+ case L2CAP_MOVE_WAIT_LOGICAL_COMP:
+ /* Move confirm will be sent after a success
+ * response is received
+ */
+ chan->move_state = L2CAP_MOVE_WAIT_RSP_SUCCESS;
+ break;
+ case L2CAP_MOVE_WAIT_LOGICAL_CFM:
+ if (test_bit(CONN_LOCAL_BUSY, &chan->conn_state)) {
+ chan->move_state = L2CAP_MOVE_WAIT_LOCAL_BUSY;
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_INITIATOR) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM_RSP;
+ l2cap_send_move_chan_cfm(chan, L2CAP_MC_CONFIRMED);
+ } else if (chan->move_role == L2CAP_MOVE_ROLE_RESPONDER) {
+ chan->move_state = L2CAP_MOVE_WAIT_CONFIRM;
+ l2cap_send_move_chan_rsp(chan, L2CAP_MR_SUCCESS);
+ }
+ break;
+ default:
+ /* Move was not in expected state, free the channel */
+ __release_logical_link(chan);
+
+ chan->move_state = L2CAP_MOVE_STABLE;
+ }
+}
+
+/* Call with chan locked */
static void l2cap_logical_cfm(struct l2cap_chan *chan, struct hci_chan *hchan,
u8 status)
{
- /* Placeholder */
- return;
+ BT_DBG("chan %p, hchan %p, status %d", chan, hchan, status);
+
+ if (status) {
+ l2cap_logical_fail(chan);
+ } else if (chan->state != BT_CONNECTED) {
+ /* Ignore logical link if channel is on BR/EDR */
+ if (chan->local_amp_id)
+ l2cap_logical_finish_create(chan, hchan);
+ } else {
+ l2cap_logical_finish_move(chan, hchan);
+ }
}
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
@@ -4272,6 +4376,7 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
u16 cmd_len, void *data)
{
struct l2cap_move_chan_req *req = data;
+ struct l2cap_move_chan_rsp rsp;
struct l2cap_chan *chan;
u16 icid = 0;
u16 result = L2CAP_MR_NOT_ALLOWED;
@@ -4348,7 +4453,10 @@ static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
}
send_move_response:
- l2cap_send_move_chan_rsp(conn, cmd->ident, icid, result);
+ rsp.icid = cpu_to_le16(icid);
+ rsp.result = cpu_to_le16(result);
+ l2cap_send_cmd(conn, cmd->ident, L2CAP_MOVE_CHAN_RSP,
+ sizeof(rsp), &rsp);
if (chan)
l2cap_chan_unlock(chan);
--
1.7.12.3
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2012-10-19 21:34 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-19 21:33 [PATCHv4 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-19 21:33 ` [PATCHv4 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-10-19 21:33 ` [PATCHv4 02/18] Bluetooth: Add L2CAP create channel request handling Mat Martineau
2012-10-19 21:33 ` [PATCHv4 03/18] Bluetooth: Remove unnecessary intermediate function Mat Martineau
2012-10-19 21:33 ` [PATCHv4 04/18] Bluetooth: Lookup channel structure based on DCID Mat Martineau
2012-10-19 21:33 ` [PATCHv4 05/18] Bluetooth: Channel move request handling Mat Martineau
2012-10-19 21:33 ` [PATCHv4 06/18] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
2012-10-19 21:33 ` [PATCHv4 07/18] Bluetooth: Add move channel confirm handling Mat Martineau
2012-10-19 21:33 ` [PATCHv4 08/18] Bluetooth: Add state to hci_chan Mat Martineau
2012-10-19 21:34 ` [PATCHv4 09/18] Bluetooth: Move channel response Mat Martineau
2012-10-19 21:34 ` Mat Martineau [this message]
2012-10-23 18:53 ` [PATCHv4 10/18] Bluetooth: Add logical link confirm Marcel Holtmann
2012-10-23 19:27 ` Mat Martineau
2012-10-23 21:51 ` Marcel Holtmann
2012-10-19 21:34 ` [PATCHv4 11/18] Bluetooth: Add move confirm response handling Mat Martineau
2012-10-19 21:34 ` [PATCHv4 12/18] Bluetooth: Handle physical link completion Mat Martineau
2012-10-19 21:34 ` [PATCHv4 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
2012-10-19 21:34 ` [PATCHv4 14/18] Bluetooth: Do not send data during channel move Mat Martineau
2012-10-19 21:34 ` [PATCHv4 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
2012-10-19 21:34 ` [PATCHv4 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
2012-10-19 21:34 ` [PATCHv4 17/18] Bluetooth: Do not retransmit data during a channel move Mat Martineau
2012-10-19 21:34 ` [PATCHv4 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1350682449-24818-11-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=andrei.emeltchenko.news@gmail.com \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=sunnyk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).