From: Marcel Holtmann <marcel@holtmann.org>
To: Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH 1/7] Bluetooth: mgmt: Add support for switching to LE peripheral mode
Date: Tue, 23 Oct 2012 12:01:19 -0700 [thread overview]
Message-ID: <1351018879.1785.44.camel@aeonflux> (raw)
In-Reply-To: <1351011241-32515-2-git-send-email-johan.hedberg@gmail.com>
Hi Johan,
> This patch extends the mgmt_set_le command to allow for a new value
> (0x02) to mean that LE should be enabled together with advertising
> enabled. This paves the way for acting in a fully functional LE
> peripheral role. The change to the mgmt_set_le command is fully
> backwards compatible as the value 0x01 means LE central role (which was
> the old behavior).
>
> Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
> ---
> include/net/bluetooth/hci.h | 3 +
> include/net/bluetooth/hci_core.h | 1 +
> include/net/bluetooth/mgmt.h | 6 ++
> net/bluetooth/hci_event.c | 44 +++++++++++
> net/bluetooth/mgmt.c | 159 +++++++++++++++++++++++++++++++-------
> 5 files changed, 185 insertions(+), 28 deletions(-)
>
> diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
> index 348f4bf..a633da0 100644
> --- a/include/net/bluetooth/hci.h
> +++ b/include/net/bluetooth/hci.h
> @@ -115,6 +115,7 @@ enum {
> HCI_SSP_ENABLED,
> HCI_HS_ENABLED,
> HCI_LE_ENABLED,
> + HCI_LE_PERIPHERAL,
> HCI_CONNECTABLE,
> HCI_DISCOVERABLE,
> HCI_LINK_SECURITY,
> @@ -938,6 +939,8 @@ struct hci_rp_le_read_adv_tx_power {
> __s8 tx_power;
> } __packed;
>
> +#define HCI_OP_LE_SET_ADV_ENABLE 0x200a
> +
> #define HCI_OP_LE_SET_SCAN_PARAM 0x200b
> struct hci_cp_le_set_scan_param {
> __u8 type;
> diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
> index 8260bf2..f288a8c 100644
> --- a/include/net/bluetooth/hci_core.h
> +++ b/include/net/bluetooth/hci_core.h
> @@ -1075,6 +1075,7 @@ int mgmt_set_local_name_complete(struct hci_dev *hdev, u8 *name, u8 status);
> int mgmt_read_local_oob_data_reply_complete(struct hci_dev *hdev, u8 *hash,
> u8 *randomizer, u8 status);
> int mgmt_le_enable_complete(struct hci_dev *hdev, u8 enable, u8 status);
> +int mgmt_le_adv_enable_complete(struct hci_dev *hdev, u8 enable, u8 status);
> int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
> u8 addr_type, u8 *dev_class, s8 rssi, u8 cfm_name,
> u8 ssp, u8 *eir, u16 eir_len);
> diff --git a/include/net/bluetooth/mgmt.h b/include/net/bluetooth/mgmt.h
> index 22980a7..26c9a4d 100644
> --- a/include/net/bluetooth/mgmt.h
> +++ b/include/net/bluetooth/mgmt.h
> @@ -92,6 +92,7 @@ struct mgmt_rp_read_index_list {
> #define MGMT_SETTING_BREDR 0x00000080
> #define MGMT_SETTING_HS 0x00000100
> #define MGMT_SETTING_LE 0x00000200
> +#define MGMT_SETTING_PERIPHERAL 0x00000400
>
> #define MGMT_OP_READ_INFO 0x0004
> #define MGMT_READ_INFO_SIZE 0
> @@ -134,6 +135,11 @@ struct mgmt_cp_set_discoverable {
> #define MGMT_OP_SET_HS 0x000C
>
> #define MGMT_OP_SET_LE 0x000D
> +
> +#define MGMT_LE_OFF 0x00
> +#define MGMT_LE_CENTRAL 0x01
> +#define MGMT_LE_PERIPHERAL 0x02
> +
> #define MGMT_OP_SET_DEV_CLASS 0x000E
> struct mgmt_cp_set_dev_class {
> __u8 major;
> diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
> index fd5a51c..0393b34 100644
> --- a/net/bluetooth/hci_event.c
> +++ b/net/bluetooth/hci_event.c
> @@ -786,6 +786,9 @@ static void hci_set_le_support(struct hci_dev *hdev)
> if (cp.le != !!(hdev->host_features[0] & LMP_HOST_LE))
> hci_send_cmd(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(cp),
> &cp);
> + else if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags))
> + hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE, sizeof(cp.le),
> + &cp.le);
What is this doing and why it is correct? I am failing to see this. We
need to enable LE host supported first anyway.
> }
>
> static void hci_cc_read_local_ext_features(struct hci_dev *hdev,
> @@ -1189,6 +1192,38 @@ static void hci_cc_le_set_scan_param(struct hci_dev *hdev, struct sk_buff *skb)
> }
> }
>
> +static void hci_cc_le_set_adv_enable(struct hci_dev *hdev, struct sk_buff *skb)
> +{
> + __u8 *sent, status = *((__u8 *) skb->data);
> +
> + BT_DBG("%s status 0x%2.2x", hdev->name, status);
> +
> + sent = hci_sent_cmd_data(hdev, HCI_OP_LE_SET_ADV_ENABLE);
> + if (!sent)
> + return;
> +
> + hci_dev_lock(hdev);
> +
> + if (!status) {
> + if (*sent)
> + set_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags);
> + else
> + clear_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags);
> + } else {
> + if (*sent)
> + clear_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags);
> + else
> + set_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags);
> + }
Are you sure we want to based LE peripheral enabling based on if we
advertise or not. I can see cases where we are a peripheral, but might
want to not always advertise.
> +
> + if (!test_bit(HCI_INIT, &hdev->flags))
> + mgmt_le_adv_enable_complete(hdev, *sent, status);
> +
> + hci_dev_unlock(hdev);
> +
> + hci_req_complete(hdev, HCI_OP_LE_SET_ADV_ENABLE, status);
> +}
> +
> static void hci_cc_le_set_scan_enable(struct hci_dev *hdev,
> struct sk_buff *skb)
> {
> @@ -1287,6 +1322,11 @@ static void hci_cc_write_le_host_supported(struct hci_dev *hdev,
> hdev->host_features[0] |= LMP_HOST_LE;
> else
> hdev->host_features[0] &= ~LMP_HOST_LE;
> +
> + if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags) &&
> + test_bit(HCI_INIT, &hdev->flags))
> + hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE,
> + sizeof(sent->le), &sent->le);
> }
>
> if (test_bit(HCI_MGMT, &hdev->dev_flags) &&
> @@ -2549,6 +2589,10 @@ static void hci_cmd_complete_evt(struct hci_dev *hdev, struct sk_buff *skb)
> hci_cc_le_set_scan_param(hdev, skb);
> break;
>
> + case HCI_OP_LE_SET_ADV_ENABLE:
> + hci_cc_le_set_adv_enable(hdev, skb);
> + break;
> +
> case HCI_OP_LE_SET_SCAN_ENABLE:
> hci_cc_le_set_scan_enable(hdev, skb);
> break;
> diff --git a/net/bluetooth/mgmt.c b/net/bluetooth/mgmt.c
> index 3fe74f4..1d79979 100644
> --- a/net/bluetooth/mgmt.c
> +++ b/net/bluetooth/mgmt.c
> @@ -393,8 +393,10 @@ static u32 get_supported_settings(struct hci_dev *hdev)
> if (enable_hs)
> settings |= MGMT_SETTING_HS;
>
> - if (lmp_le_capable(hdev))
> + if (lmp_le_capable(hdev)) {
> settings |= MGMT_SETTING_LE;
> + settings |= MGMT_SETTING_PERIPHERAL;
> + }
>
> return settings;
> }
> @@ -418,9 +420,13 @@ static u32 get_current_settings(struct hci_dev *hdev)
> if (lmp_bredr_capable(hdev))
> settings |= MGMT_SETTING_BREDR;
>
> - if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags))
> + if (test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) {
> settings |= MGMT_SETTING_LE;
>
> + if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags))
> + settings |= MGMT_SETTING_PERIPHERAL;
> + }
> +
> if (test_bit(HCI_LINK_SECURITY, &hdev->dev_flags))
> settings |= MGMT_SETTING_LINK_SECURITY;
>
> @@ -1195,13 +1201,36 @@ static int set_hs(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)
> return send_settings_rsp(sk, MGMT_OP_SET_HS, hdev);
> }
>
> +static u8 get_le_mode(struct hci_dev *hdev)
> +{
> + if (hdev->host_features[0] & LMP_HOST_LE) {
> + if (test_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags))
> + return MGMT_LE_PERIPHERAL;
> + return MGMT_LE_CENTRAL;
> + }
> +
> + return MGMT_LE_OFF;
> +}
> +
> +static bool valid_le_mode(u8 mode)
> +{
> + switch (mode) {
> + case MGMT_LE_OFF:
> + case MGMT_LE_CENTRAL:
> + case MGMT_LE_PERIPHERAL:
> + return true;
> + default:
> + return false;
> + }
> +}
> +
I prefer to not use the default and just return false at the end of the
function.
> static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)
> {
> - struct mgmt_mode *cp = data;
> struct hci_cp_write_le_host_supported hci_cp;
> + struct mgmt_mode *cp = data;
> struct pending_cmd *cmd;
> + u8 old_mode, new_mode;
> int err;
> - u8 val, enabled;
>
> BT_DBG("request for %s", hdev->name);
>
> @@ -1213,48 +1242,71 @@ static int set_le(struct sock *sk, struct hci_dev *hdev, void *data, u16 len)
> goto unlock;
> }
>
> - val = !!cp->val;
> - enabled = !!(hdev->host_features[0] & LMP_HOST_LE);
> + if (!valid_le_mode(cp->val)) {
> + err = cmd_status(sk, hdev->id, MGMT_OP_SET_LE,
> + MGMT_STATUS_INVALID_PARAMS);
> + goto unlock;
> + }
>
> - if (!hdev_is_powered(hdev) || val == enabled) {
> - bool changed = false;
> + if (mgmt_pending_find(MGMT_OP_SET_LE, hdev)) {
> + err = cmd_status(sk, hdev->id, MGMT_OP_SET_LE,
> + MGMT_STATUS_BUSY);
> + goto unlock;
> + }
> +
> + new_mode = cp->val;
> + old_mode = get_le_mode(hdev);
> +
> + BT_DBG("%s old_mode %u new_mode %u", hdev->name, old_mode, new_mode);
> +
> + if (new_mode == old_mode) {
> + err = send_settings_rsp(sk, MGMT_OP_SET_LE, hdev);
> + goto unlock;
> + }
> +
> + if (old_mode == MGMT_LE_PERIPHERAL || new_mode == MGMT_LE_PERIPHERAL)
> + change_bit(HCI_LE_PERIPHERAL, &hdev->dev_flags);
>
> - if (val != test_bit(HCI_LE_ENABLED, &hdev->dev_flags)) {
> + if (!hdev_is_powered(hdev)) {
> + if (old_mode == MGMT_LE_OFF || new_mode == MGMT_LE_OFF)
> change_bit(HCI_LE_ENABLED, &hdev->dev_flags);
> - changed = true;
> - }
>
> err = send_settings_rsp(sk, MGMT_OP_SET_LE, hdev);
> if (err < 0)
> goto unlock;
>
> - if (changed)
> - err = new_settings(hdev, sk);
> + err = new_settings(hdev, sk);
>
> goto unlock;
> }
>
> - if (mgmt_pending_find(MGMT_OP_SET_LE, hdev)) {
> - err = cmd_status(sk, hdev->id, MGMT_OP_SET_LE,
> - MGMT_STATUS_BUSY);
> - goto unlock;
> - }
> -
> cmd = mgmt_pending_add(sk, MGMT_OP_SET_LE, hdev, data, len);
> if (!cmd) {
> err = -ENOMEM;
> goto unlock;
> }
>
> + if ((old_mode != MGMT_LE_OFF && new_mode == MGMT_LE_PERIPHERAL) ||
> + old_mode == MGMT_LE_PERIPHERAL) {
> + u8 adv_enable = (new_mode == MGMT_LE_PERIPHERAL);
> +
> + err = hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE,
> + sizeof(adv_enable), &adv_enable);
> + if (err < 0)
> + mgmt_pending_remove(cmd);
> +
> + goto unlock;
> + }
> +
this gets a bit complicated. We either need more comments or split this
out in separate helper functions.
> memset(&hci_cp, 0, sizeof(hci_cp));
>
> - if (val) {
> - hci_cp.le = val;
> + if (old_mode == MGMT_LE_OFF) {
> + hci_cp.le = 1;
> hci_cp.simul = !!(hdev->features[6] & LMP_SIMUL_LE_BR);
> }
>
> - err = hci_send_cmd(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED, sizeof(hci_cp),
> - &hci_cp);
> + err = hci_send_cmd(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED,
> + sizeof(hci_cp), &hci_cp);
> if (err < 0)
> mgmt_pending_remove(cmd);
>
> @@ -3525,7 +3577,8 @@ int mgmt_read_local_oob_data_reply_complete(struct hci_dev *hdev, u8 *hash,
>
> int mgmt_le_enable_complete(struct hci_dev *hdev, u8 enable, u8 status)
> {
> - struct cmd_lookup match = { NULL, hdev };
> + struct pending_cmd *cmd;
> + struct mgmt_mode *cp;
> bool changed = false;
> int err = 0;
>
> @@ -3550,17 +3603,67 @@ int mgmt_le_enable_complete(struct hci_dev *hdev, u8 enable, u8 status)
> changed = true;
> }
>
> - mgmt_pending_foreach(MGMT_OP_SET_LE, hdev, settings_rsp, &match);
> + cmd = mgmt_pending_find(MGMT_OP_SET_LE, hdev);
> + if (!cmd)
> + goto done;
> +
> + cp = cmd->param;
> + if (enable && cp->val == MGMT_LE_PERIPHERAL)
> + return hci_send_cmd(hdev, HCI_OP_LE_SET_ADV_ENABLE,
> + sizeof(enable), &enable);
>
> + send_settings_rsp(cmd->sk, cmd->opcode, hdev);
> + list_del(&cmd->list);
> +
> +done:
> if (changed)
> - err = new_settings(hdev, match.sk);
> + err = new_settings(hdev, cmd ? cmd->sk : NULL);
>
> - if (match.sk)
> - sock_put(match.sk);
> + if (cmd)
> + mgmt_pending_free(cmd);
>
> return err;
> }
>
> +int mgmt_le_adv_enable_complete(struct hci_dev *hdev, u8 enable, u8 status)
> +{
> + struct pending_cmd *cmd;
> + struct mgmt_mode *cp;
> +
> + if (status) {
> + u8 mgmt_err = mgmt_status(status);
> +
> + mgmt_pending_foreach(MGMT_OP_SET_LE, hdev, cmd_status_rsp,
> + &mgmt_err);
> +
> + return 0;
> + }
> +
> + cmd = mgmt_pending_find(MGMT_OP_SET_LE, hdev);
> + if (!cmd) {
> + new_settings(hdev, NULL);
> + return 0;
> + }
> +
> + cp = cmd->param;
> + if (!enable && cp->val == MGMT_LE_OFF) {
> + struct hci_cp_write_le_host_supported hci_cp;
> +
> + memset(&hci_cp, 0, sizeof(hci_cp));
> +
> + return hci_send_cmd(hdev, HCI_OP_WRITE_LE_HOST_SUPPORTED,
> + sizeof(hci_cp), &hci_cp);
> + }
> +
> + new_settings(hdev, cmd->sk);
> + send_settings_rsp(cmd->sk, cmd->opcode, hdev);
> +
> + list_del(&cmd->list);
> + mgmt_pending_free(cmd);
> +
> + return 0;
> +}
> +
> int mgmt_device_found(struct hci_dev *hdev, bdaddr_t *bdaddr, u8 link_type,
> u8 addr_type, u8 *dev_class, s8 rssi, u8 cfm_name, u8
> ssp, u8 *eir, u16 eir_len)
Regards
Marcel
next prev parent reply other threads:[~2012-10-23 19:01 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-23 16:53 [PATCH 0/7] Bluetooth: Improved single-mode and LE peripheral support Johan Hedberg
2012-10-23 16:53 ` [PATCH 1/7] Bluetooth: mgmt: Add support for switching to LE peripheral mode Johan Hedberg
2012-10-23 19:01 ` Marcel Holtmann [this message]
2012-10-23 20:26 ` Johan Hedberg
2012-10-23 21:49 ` Marcel Holtmann
2012-10-23 16:53 ` [PATCH 2/7] Bluetooth: mgmt: Restrict BR/EDR settings to BR/EDR-only adapters Johan Hedberg
2012-10-23 18:51 ` Anderson Lizardo
2012-10-23 19:03 ` Marcel Holtmann
2012-10-23 19:02 ` Marcel Holtmann
2012-10-23 19:31 ` Anderson Lizardo
2012-10-23 20:48 ` Johan Hedberg
2012-10-23 21:46 ` Marcel Holtmann
2012-10-24 12:11 ` Anderson Lizardo
2012-10-24 15:14 ` Marcel Holtmann
2012-10-23 16:53 ` [PATCH 3/7] Bluetooth: Disallow LE scanning and connecting in peripheral mode Johan Hedberg
2012-10-23 18:42 ` Anderson Lizardo
2012-10-23 20:59 ` Johan Hedberg
2012-10-23 21:37 ` Marcel Holtmann
2012-10-23 16:53 ` [PATCH 4/7] Bluetooth: Add support for setting LE advertising data Johan Hedberg
2012-10-23 18:30 ` Anderson Lizardo
2012-10-23 21:26 ` Johan Hedberg
2012-10-25 0:00 ` Anderson Lizardo
2012-10-23 16:53 ` [PATCH 5/7] Bluetooth: Fix updating host feature bits for LE Johan Hedberg
2012-10-23 19:04 ` Marcel Holtmann
2012-10-23 16:54 ` [PATCH 6/7] Bluetooth: Sort feature test macros by bitmask location Johan Hedberg
2012-10-23 19:06 ` Marcel Holtmann
2012-10-23 16:54 ` [PATCH 7/7] Bluetooth: Make use feature test macros Johan Hedberg
2012-10-23 19:06 ` Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351018879.1785.44.camel@aeonflux \
--to=marcel@holtmann.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).