From: Mat Martineau <mathewm@codeaurora.org>
To: linux-bluetooth@vger.kernel.org, gustavo@padovan.org
Cc: sunnyk@codeaurora.org, marcel@holtmann.org,
andrei.emeltchenko.news@gmail.com
Subject: [PATCHv5 07/18] Bluetooth: Add move channel confirm handling
Date: Tue, 23 Oct 2012 15:24:12 -0700 [thread overview]
Message-ID: <1351031063-11791-8-git-send-email-mathewm@codeaurora.org> (raw)
In-Reply-To: <1351031063-11791-1-git-send-email-mathewm@codeaurora.org>
After sending a move channel response, a move responder waits for a
move channel confirm command. If the received command has a
"confirmed" result the move is proceeding, and "unconfirmed" means the
move has failed and the channel will not change controllers.
Signed-off-by: Mat Martineau <mathewm@codeaurora.org>
Acked-by: Andrei Emeltchenko <andrei.emeltchenko@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
---
net/bluetooth/l2cap_core.c | 58 +++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 55 insertions(+), 3 deletions(-)
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index b9a91bf..fef0394 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -1037,6 +1037,28 @@ static void l2cap_move_setup(struct l2cap_chan *chan)
set_bit(CONN_REMOTE_BUSY, &chan->conn_state);
}
+static void l2cap_move_done(struct l2cap_chan *chan)
+{
+ u8 move_role = chan->move_role;
+ BT_DBG("chan %p", chan);
+
+ chan->move_state = L2CAP_MOVE_STABLE;
+ chan->move_role = L2CAP_MOVE_ROLE_NONE;
+
+ if (chan->mode != L2CAP_MODE_ERTM)
+ return;
+
+ switch (move_role) {
+ case L2CAP_MOVE_ROLE_INITIATOR:
+ l2cap_tx(chan, NULL, NULL, L2CAP_EV_EXPLICIT_POLL);
+ chan->rx_state = L2CAP_RX_STATE_WAIT_F;
+ break;
+ case L2CAP_MOVE_ROLE_RESPONDER:
+ chan->rx_state = L2CAP_RX_STATE_WAIT_P;
+ break;
+ }
+}
+
static void l2cap_chan_ready(struct l2cap_chan *chan)
{
/* This clears all conf flags, including CONF_NOT_COMPLETE */
@@ -4193,6 +4215,14 @@ static void l2cap_send_move_chan_cfm_rsp(struct l2cap_conn *conn, u8 ident,
l2cap_send_cmd(conn, ident, L2CAP_MOVE_CHAN_CFM_RSP, sizeof(rsp), &rsp);
}
+static void __release_logical_link(struct l2cap_chan *chan)
+{
+ chan->hs_hchan = NULL;
+ chan->hs_hcon = NULL;
+
+ /* Placeholder - release the logical link */
+}
+
static inline int l2cap_move_channel_req(struct l2cap_conn *conn,
struct l2cap_cmd_hdr *cmd,
u16 cmd_len, void *data)
@@ -4308,11 +4338,12 @@ static inline int l2cap_move_channel_rsp(struct l2cap_conn *conn,
return 0;
}
-static inline int l2cap_move_channel_confirm(struct l2cap_conn *conn,
- struct l2cap_cmd_hdr *cmd,
- u16 cmd_len, void *data)
+static int l2cap_move_channel_confirm(struct l2cap_conn *conn,
+ struct l2cap_cmd_hdr *cmd,
+ u16 cmd_len, void *data)
{
struct l2cap_move_chan_cfm *cfm = data;
+ struct l2cap_chan *chan;
u16 icid, result;
if (cmd_len != sizeof(*cfm))
@@ -4323,8 +4354,29 @@ static inline int l2cap_move_channel_confirm(struct l2cap_conn *conn,
BT_DBG("icid 0x%4.4x, result 0x%4.4x", icid, result);
+ chan = l2cap_get_chan_by_dcid(conn, icid);
+ if (!chan) {
+ /* Spec requires a response even if the icid was not found */
+ l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
+ return 0;
+ }
+
+ if (chan->move_state == L2CAP_MOVE_WAIT_CONFIRM) {
+ if (result == L2CAP_MC_CONFIRMED) {
+ chan->local_amp_id = chan->move_id;
+ if (!chan->local_amp_id)
+ __release_logical_link(chan);
+ } else {
+ chan->move_id = chan->local_amp_id;
+ }
+
+ l2cap_move_done(chan);
+ }
+
l2cap_send_move_chan_cfm_rsp(conn, cmd->ident, icid);
+ l2cap_chan_unlock(chan);
+
return 0;
}
--
1.8.0
--
Mat Martineau
Employee of Qualcomm Innovation Center, Inc.
The Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, hosted by The Linux Foundation
next prev parent reply other threads:[~2012-10-23 22:24 UTC|newest]
Thread overview: 23+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-23 22:24 [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Mat Martineau
2012-10-23 22:24 ` [PATCHv5 01/18] Bluetooth: Add new l2cap_chan struct members for high speed channels Mat Martineau
2012-10-23 22:24 ` [PATCHv5 02/18] Bluetooth: Add L2CAP create channel request handling Mat Martineau
2012-10-23 22:24 ` [PATCHv5 03/18] Bluetooth: Remove unnecessary intermediate function Mat Martineau
2012-10-23 22:24 ` [PATCHv5 04/18] Bluetooth: Lookup channel structure based on DCID Mat Martineau
2012-10-23 22:24 ` [PATCHv5 05/18] Bluetooth: Channel move request handling Mat Martineau
2012-10-23 22:24 ` [PATCHv5 06/18] Bluetooth: Add new ERTM receive states for channel move Mat Martineau
2012-10-23 22:24 ` Mat Martineau [this message]
2012-10-23 22:24 ` [PATCHv5 08/18] Bluetooth: Add state to hci_chan Mat Martineau
2012-10-23 22:24 ` [PATCHv5 09/18] Bluetooth: Move channel response Mat Martineau
2012-10-23 22:24 ` [PATCHv5 10/18] Bluetooth: Add logical link confirm Mat Martineau
2012-10-23 22:36 ` Marcel Holtmann
2012-10-23 22:24 ` [PATCHv5 11/18] Bluetooth: Add move confirm response handling Mat Martineau
2012-10-23 22:24 ` [PATCHv5 12/18] Bluetooth: Handle physical link completion Mat Martineau
2012-10-23 22:24 ` [PATCHv5 13/18] Bluetooth: Flag ACL frames as complete for AMP controllers Mat Martineau
2012-10-23 22:24 ` [PATCHv5 14/18] Bluetooth: Do not send data during channel move Mat Martineau
2012-10-23 22:24 ` [PATCHv5 15/18] Bluetooth: Configure appropriate timeouts for AMP controllers Mat Martineau
2012-10-23 22:24 ` [PATCHv5 16/18] Bluetooth: Ignore BR/EDR packet size constraints when fragmenting for AMP Mat Martineau
2012-10-23 22:24 ` [PATCHv5 17/18] Bluetooth: Do not retransmit data during a channel move Mat Martineau
2012-10-23 22:24 ` [PATCHv5 18/18] Bluetooth: Start channel move when socket option is changed Mat Martineau
2012-10-24 2:45 ` Gustavo Padovan
2012-10-23 22:38 ` [PATCHv5 00/18] L2CAP signaling for AMP channel create/move Marcel Holtmann
2012-10-24 4:58 ` Andrei Emeltchenko
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1351031063-11791-8-git-send-email-mathewm@codeaurora.org \
--to=mathewm@codeaurora.org \
--cc=andrei.emeltchenko.news@gmail.com \
--cc=gustavo@padovan.org \
--cc=linux-bluetooth@vger.kernel.org \
--cc=marcel@holtmann.org \
--cc=sunnyk@codeaurora.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).