From: Marcel Holtmann <marcel@holtmann.org>
To: "Frédéric Dalleau" <frederic.dalleau@linux.intel.com>
Cc: linux-bluetooth@vger.kernel.org
Subject: Re: [PATCH v4 11/16] sbc: Add SBC_MSBC flag to enable 15 block encoding
Date: Wed, 14 Nov 2012 23:49:37 +0900 [thread overview]
Message-ID: <1352904577.20338.10.camel@aeonflux> (raw)
In-Reply-To: <1351589975-22640-12-git-send-email-frederic.dalleau@linux.intel.com>
Hi Fred,
> ---
> sbc/sbc.c | 23 +++++++++++++++--------
> sbc/sbc.h | 3 +++
> 2 files changed, 18 insertions(+), 8 deletions(-)
>
> diff --git a/sbc/sbc.c b/sbc/sbc.c
> index ffdf05d..22fa898 100644
> --- a/sbc/sbc.c
> +++ b/sbc/sbc.c
> @@ -52,6 +52,9 @@
>
> #define SBC_SYNCWORD 0x9C
>
> +#define MSBC_SYNCWORD 0xAD
> +#define MSBC_BLOCKS 15
> +
> /* This structure contains an unpacked SBC frame.
> Yes, there is probably quite some unused space herein */
> struct sbc_frame {
> @@ -903,12 +906,12 @@ static ssize_t sbc_pack_frame(uint8_t *data, struct sbc_frame *frame, size_t len
> }
> }
>
> -static void sbc_encoder_init(struct sbc_encoder_state *state,
> - const struct sbc_frame *frame)
> +static void sbc_encoder_init(unsigned long flags,
> + struct sbc_encoder_state *state, const struct sbc_frame *frame)
> {
> memset(&state->X, 0, sizeof(state->X));
> state->position = (SBC_X_BUFFER_SIZE - frame->subbands * 9) & ~7;
> - state->increment = 4;
> + state->increment = flags & SBC_MSBC ? 1 : 4;
just for pure cosmetics, use an if statement.
>
> sbc_init_primitives(state);
> }
> @@ -922,6 +925,7 @@ struct sbc_priv {
>
> static void sbc_set_defaults(sbc_t *sbc, unsigned long flags)
> {
> + sbc->flags = flags;
> sbc->frequency = SBC_FREQ_44100;
> sbc->mode = SBC_MODE_STEREO;
> sbc->subbands = SBC_SB_8;
> @@ -1057,12 +1061,13 @@ SBC_EXPORT ssize_t sbc_encode(sbc_t *sbc, const void *input, size_t input_len,
> priv->frame.subband_mode = sbc->subbands;
> priv->frame.subbands = sbc->subbands ? 8 : 4;
> priv->frame.block_mode = sbc->blocks;
> - priv->frame.blocks = 4 + (sbc->blocks * 4);
> + priv->frame.blocks = sbc->flags & SBC_MSBC ?
> + MSBC_BLOCKS : 4 + (sbc->blocks * 4);
Same here.
> priv->frame.bitpool = sbc->bitpool;
> priv->frame.codesize = sbc_get_codesize(sbc);
> priv->frame.length = sbc_get_frame_length(sbc);
>
> - sbc_encoder_init(&priv->enc_state, &priv->frame);
> + sbc_encoder_init(sbc->flags, &priv->enc_state, &priv->frame);
> priv->init = 1;
> } else if (priv->frame.bitpool != sbc->bitpool) {
> priv->frame.length = sbc_get_frame_length(sbc);
> @@ -1141,7 +1146,7 @@ SBC_EXPORT size_t sbc_get_frame_length(sbc_t *sbc)
> return priv->frame.length;
>
> subbands = sbc->subbands ? 8 : 4;
> - blocks = 4 + (sbc->blocks * 4);
> + blocks = sbc->flags & SBC_MSBC ? MSBC_BLOCKS : 4 + (sbc->blocks * 4);
And for this one as well.
> channels = sbc->mode == SBC_MODE_MONO ? 1 : 2;
> joint = sbc->mode == SBC_MODE_JOINT_STEREO ? 1 : 0;
> bitpool = sbc->bitpool;
> @@ -1165,7 +1170,8 @@ SBC_EXPORT unsigned sbc_get_frame_duration(sbc_t *sbc)
> priv = sbc->priv;
> if (!priv->init) {
> subbands = sbc->subbands ? 8 : 4;
> - blocks = 4 + (sbc->blocks * 4);
> + blocks = sbc->flags & SBC_MSBC ?
> + MSBC_BLOCKS : 4 + (sbc->blocks * 4);
Even here it is better cosmetics.
> } else {
> subbands = priv->frame.subbands;
> blocks = priv->frame.blocks;
> @@ -1202,7 +1208,8 @@ SBC_EXPORT size_t sbc_get_codesize(sbc_t *sbc)
> priv = sbc->priv;
> if (!priv->init) {
> subbands = sbc->subbands ? 8 : 4;
> - blocks = 4 + (sbc->blocks * 4);
> + blocks = sbc->flags & SBC_MSBC ?
> + MSBC_BLOCKS : 4 + (sbc->blocks * 4);
Here as well.
> channels = sbc->mode == SBC_MODE_MONO ? 1 : 2;
> } else {
> subbands = priv->frame.subbands;
> diff --git a/sbc/sbc.h b/sbc/sbc.h
> index bbd45da..3511119 100644
> --- a/sbc/sbc.h
> +++ b/sbc/sbc.h
> @@ -64,6 +64,9 @@ extern "C" {
> #define SBC_LE 0x00
> #define SBC_BE 0x01
>
> +/* Additional features */
> +#define SBC_MSBC 0x01
> +
I am debating to actually call this SBC_FLAG_MSBC instead of just
SBC_MSBC. Anyone any comments?
Regards
Marcel
next prev parent reply other threads:[~2012-11-14 14:49 UTC|newest]
Thread overview: 29+ messages / expand[flat|nested] mbox.gz Atom feed top
2012-10-30 9:39 [PATCH v4 00/16] mSBC tests Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 01/16] sbc: Add encoder_state to analysis functions Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 02/16] sbc: Break 4 blocks processing to variable steps Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 03/16] sbc: Rename sbc_analyze_4b_xx to sbc_analyze_xx Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 04/16] sbc: add odd member variable to sbc_encoder_state Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 05/16] sbc: Add mmx primitive for 1b 8s analysis Frédéric Dalleau
2012-11-14 15:43 ` Frédéric Dalleau
2012-11-14 20:23 ` Siarhei Siamashka
2012-10-30 9:39 ` [PATCH v4 06/16] sbc: Add armv6 " Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 07/16] sbc: Add iwmmxt primitive for 1b 8s encoding Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 08/16] sbc: Add simd primitive for 1b 8s analysis Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 09/16] sbc: Use simd primitive if doing msbc on neon Frédéric Dalleau
2012-11-14 19:27 ` Siarhei Siamashka
2012-11-15 10:23 ` Frédéric Dalleau
2012-11-18 23:46 ` Siarhei Siamashka
2012-10-30 9:39 ` [PATCH v4 10/16] sbc: simd support for 8 multiples block size Frédéric Dalleau
2012-11-14 19:09 ` Siarhei Siamashka
2012-10-30 9:39 ` [PATCH v4 11/16] sbc: Add SBC_MSBC flag to enable 15 block encoding Frédéric Dalleau
2012-11-14 14:49 ` Marcel Holtmann [this message]
2012-11-14 15:34 ` Frédéric Dalleau
2012-11-14 23:20 ` Marcel Holtmann
2012-10-30 9:39 ` [PATCH v4 12/16] sbc: Add support for mSBC frame header Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 13/16] sbc: Update sbcdec for msbc Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 14/16] sbc: Update sbcenc " Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 15/16] sbc: Update sbcinfo " Frédéric Dalleau
2012-10-30 9:39 ` [PATCH v4 16/16] sbc: Update copyrights Frédéric Dalleau
2012-11-14 10:00 ` [PATCH v4 00/16] mSBC tests Frédéric Dalleau
2012-11-14 14:50 ` Marcel Holtmann
2012-11-14 19:57 ` Siarhei Siamashka
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1352904577.20338.10.camel@aeonflux \
--to=marcel@holtmann.org \
--cc=frederic.dalleau@linux.intel.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).