From: Sunguk Lee <d3m3vilurr@gmail.com>
To: Marcel Holtmann <marcel@holtmann.org>,
Gustavo Padovan <gustavo@padovan.org>,
Johan Hedberg <johan.hedberg@gmail.com>
Cc: linux-bluetooth@vger.kernel.org, linux-kernel@vger.kernel.org,
Sunguk Lee <d3m3vilurr@gmail.com>
Subject: [PATCH] Bluetooth device 0cf3:3008 should map AR 3012
Date: Tue, 12 Mar 2013 04:41:58 +0900 [thread overview]
Message-ID: <1363030918-8186-1-git-send-email-d3m3vilurr@gmail.com> (raw)
T: Bus=01 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=3008 Rev= 0.01
S: Manufacturer=Atheros Communications
S: Product=Bluetooth USB Host Controller
S: SerialNumber=Alaska Day 2006
C:* #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I:* If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=81(I) Atr=03(Int.) MxPS= 16 Ivl=1ms
E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms
I:* If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 0 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 0 Ivl=1ms
I: If#= 1 Alt= 1 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 9 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 9 Ivl=1ms
I: If#= 1 Alt= 2 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 17 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 17 Ivl=1ms
I: If#= 1 Alt= 3 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 25 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 25 Ivl=1ms
I: If#= 1 Alt= 4 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 33 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 33 Ivl=1ms
I: If#= 1 Alt= 5 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
E: Ad=83(I) Atr=01(Isoc) MxPS= 49 Ivl=1ms
E: Ad=03(O) Atr=01(Isoc) MxPS= 49 Ivl=1ms
Signed-off-by: Sunguk Lee <d3m3vilurr@gmail.com>
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index b9908dd..3095d2e 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -74,6 +74,7 @@ static struct usb_device_id ath3k_table[] = {
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0CF3, 0x3004) },
+ { USB_DEVICE(0x0CF3, 0x3008) },
{ USB_DEVICE(0x0CF3, 0x311D) },
{ USB_DEVICE(0x13d3, 0x3375) },
{ USB_DEVICE(0x04CA, 0x3004) },
@@ -107,6 +108,7 @@ static struct usb_device_id ath3k_blist_tbl[] = {
/* Atheros AR3012 with sflash firmware*/
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311D), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 59cde8e..e547851 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -132,6 +132,7 @@ static struct usb_device_id blacklist_table[] = {
/* Atheros 3012 with sflash firmware */
{ USB_DEVICE(0x0cf3, 0x3004), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x3008), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x311d), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x13d3, 0x3375), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x04ca, 0x3004), .driver_info = BTUSB_ATH3012 },
--
1.7.10.4
next reply other threads:[~2013-03-11 19:41 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-11 19:41 Sunguk Lee [this message]
2013-03-11 19:55 ` [PATCH] Bluetooth device 0cf3:3008 should map AR 3012 Gustavo Padovan
-- strict thread matches above, loose matches on Subject: below --
2013-03-10 15:05 Sunguk Lee
2013-03-11 18:43 ` Gustavo Padovan
2013-03-11 19:45 ` d3m3vilurr
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363030918-8186-1-git-send-email-d3m3vilurr@gmail.com \
--to=d3m3vilurr@gmail.com \
--cc=gustavo@padovan.org \
--cc=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=marcel@holtmann.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox