From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: Szymon Janc To: linux-bluetooth@vger.kernel.org Cc: Szymon Janc Subject: [PATCH 5/5] rfcomm: Remove bogus manual entry Date: Fri, 31 May 2013 00:01:57 +0200 Message-Id: <1369951317-16789-5-git-send-email-szymon.janc@gmail.com> In-Reply-To: <1369951317-16789-1-git-send-email-szymon.janc@gmail.com> References: <1369951317-16789-1-git-send-email-szymon.janc@gmail.com> Sender: linux-bluetooth-owner@vger.kernel.org List-ID: This was introduced in commit b1b5f09d40 "Include security parameters" back in 2007. Those options are already descibed few lines below. --- tools/rfcomm.1 | 17 +++-------------- 1 file changed, 3 insertions(+), 14 deletions(-) diff --git a/tools/rfcomm.1 b/tools/rfcomm.1 index 51df284..a108609 100644 --- a/tools/rfcomm.1 +++ b/tools/rfcomm.1 @@ -49,20 +49,9 @@ Prints information about all configured RFCOMM devices. Switch TTY into raw mode (doesn't work with "bind"). .TP .BI -i " | " -The command is applied to device -.BI -A -Enable authentication. -.BI -E -Enable encryption. -.BI -S -Secure connection. -.BI -M -Become the master of a piconet. -.I -hciX -, which must be the name or the address of an installed Bluetooth -device. If not specified, the command will be use the first -available Bluetooth device. +The command is applied to device hciX, which must be the name or the address of +an installed Bluetooth device. If not specified, the command will be use the +first available Bluetooth device. .TP .BI -A Enable authentification -- 1.7.10.4