[PATCH v8 6/8] Bluetooth: Parameters for outgoing SCO connections

["Frédéric Dalleau" <frederic.dalleau@linux.intel.com>]

In order to establish a transparent SCO connection, the correct settings must
be specified in the Setup Synchronous Connection request. For that,
a setting field is added to ACL connection data to set up the desired
parameters.
Remove usage of hdev->voice_setting in CVSD connection.
Make use of T2 parameters for transparent data.

Signed-off-by: Frédéric Dalleau <frederic.dalleau@linux.intel.com>
---
 include/net/bluetooth/hci_core.h |    1 +
 net/bluetooth/hci_conn.c         |   22 ++++++++++++++++++----
 2 files changed, 19 insertions(+), 4 deletions(-)

diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index 69bdb67..61ca2ce 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -320,6 +320,7 @@ struct hci_conn {
 	__u32		passkey_notify;
 	__u8		passkey_entered;
 	__u16		disc_timeout;
+	__u16		setting;
 	unsigned long	flags;
 
 	__u8		remote_cap;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index d1d9919..6282c26 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -185,13 +185,25 @@ void hci_setup_sync(struct hci_conn *conn, __u16 handle)
 	conn->attempt++;
 
 	cp.handle   = cpu_to_le16(handle);
-	cp.pkt_type = cpu_to_le16(conn->pkt_type);
 
 	cp.tx_bandwidth   = __constant_cpu_to_le32(0x00001f40);
 	cp.rx_bandwidth   = __constant_cpu_to_le32(0x00001f40);
-	cp.max_latency    = __constant_cpu_to_le16(0xffff);
-	cp.voice_setting  = cpu_to_le16(hdev->voice_setting);
-	cp.retrans_effort = 0xff;
+
+	switch (conn->setting & SCO_AIRMODE_MASK) {
+	case SCO_AIRMODE_TRANSP:
+		cp.pkt_type       = __constant_cpu_to_le16(EDR_ESCO_MASK &
+							   ~ESCO_2EV3);
+		cp.max_latency    = __constant_cpu_to_le16(0x000d);
+		cp.voice_setting  = __constant_cpu_to_le16(SCO_AIRMODE_TRANSP);
+		cp.retrans_effort = 0x02;
+		break;
+	case SCO_AIRMODE_CVSD:
+		cp.pkt_type       = cpu_to_le16(conn->pkt_type);
+		cp.max_latency    = __constant_cpu_to_le16(0xffff);
+		cp.voice_setting  = cpu_to_le16(conn->setting);
+		cp.retrans_effort = 0xff;
+		break;
+	}
 
 	hci_send_cmd(hdev, HCI_OP_SETUP_SYNC_CONN, sizeof(cp), &cp);
 }
@@ -584,6 +596,8 @@ struct hci_conn *hci_connect_sco(struct hci_dev *hdev, int type, bdaddr_t *dst,
 
 	hci_conn_hold(sco);
 
+	sco->setting = setting;
+
 	if (acl->state == BT_CONNECTED &&
 	    (sco->state == BT_OPEN || sco->state == BT_CLOSED)) {
 		set_bit(HCI_CONN_POWER_SAVE, &acl->flags);
-- 
1.7.9.5