From: Marcel Holtmann <marcel@holtmann.org>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH v2 1/3] Bluetooth: Add support for setting SSP debug mode
Date: Sat, 19 Oct 2013 07:09:11 -0700 [thread overview]
Message-ID: <1382191753-59287-1-git-send-email-marcel@holtmann.org> (raw)
Enabling and disabling SSP debug mode is useful for development. This
adds a debugfs entry that allows to configure the SSP debug mode.
On purpose this has been implemented as debugfs entry and not a public
API since it is really only useful during testing and development.
Signed-off-by: Marcel Holtmann <marcel@holtmann.org>
---
include/net/bluetooth/hci.h | 2 ++
include/net/bluetooth/hci_core.h | 1 +
net/bluetooth/hci_core.c | 54 +++++++++++++++++++++++++++++++++++++++-
net/bluetooth/hci_event.c | 2 ++
4 files changed, 58 insertions(+), 1 deletion(-)
diff --git a/include/net/bluetooth/hci.h b/include/net/bluetooth/hci.h
index 77a971a..ac9c4a7 100644
--- a/include/net/bluetooth/hci.h
+++ b/include/net/bluetooth/hci.h
@@ -1043,6 +1043,8 @@ struct hci_rp_write_remote_amp_assoc {
__u8 phy_handle;
} __packed;
+#define HCI_OP_WRITE_SSP_DEBUG_MODE 0x1804
+
#define HCI_OP_LE_SET_EVENT_MASK 0x2001
struct hci_cp_le_set_event_mask {
__u8 mask[8];
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index c689bcf..d50cc7a 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -169,6 +169,7 @@ struct hci_dev {
__u8 page_scan_type;
__u16 le_scan_interval;
__u16 le_scan_window;
+ __u8 ssp_debug_mode;
__u16 devid_source;
__u16 devid_vendor;
diff --git a/net/bluetooth/hci_core.c b/net/bluetooth/hci_core.c
index 384b9db..2a9e925 100644
--- a/net/bluetooth/hci_core.c
+++ b/net/bluetooth/hci_core.c
@@ -303,6 +303,55 @@ static int auto_accept_delay_get(void *data, u64 *val)
DEFINE_SIMPLE_ATTRIBUTE(auto_accept_delay_fops, auto_accept_delay_get,
auto_accept_delay_set, "%llu\n");
+static int ssp_debug_mode_set(void *data, u64 val)
+{
+ struct hci_dev *hdev = data;
+ struct sk_buff *skb;
+ __u8 mode;
+ int err;
+
+ if (val != 0 && val != 1)
+ return -EINVAL;
+
+ if (!test_bit(HCI_UP, &hdev->flags))
+ return -ENETDOWN;
+
+ hci_req_lock(hdev);
+ mode = val;
+ skb = __hci_cmd_sync(hdev, HCI_OP_WRITE_SSP_DEBUG_MODE, sizeof(mode),
+ &mode, HCI_CMD_TIMEOUT);
+ hci_req_unlock(hdev);
+
+ if (IS_ERR(skb))
+ return PTR_ERR(skb);
+
+ err = -bt_to_errno(skb->data[0]);
+ kfree_skb(skb);
+
+ if (err < 0)
+ return err;
+
+ hci_dev_lock(hdev);
+ hdev->ssp_debug_mode = val;
+ hci_dev_unlock(hdev);
+
+ return 0;
+}
+
+static int ssp_debug_mode_get(void *data, u64 *val)
+{
+ struct hci_dev *hdev = data;
+
+ hci_dev_lock(hdev);
+ *val = hdev->ssp_debug_mode;
+ hci_dev_unlock(hdev);
+
+ return 0;
+}
+
+DEFINE_SIMPLE_ATTRIBUTE(ssp_debug_mode_fops, ssp_debug_mode_get,
+ ssp_debug_mode_set, "%llu\n");
+
static int idle_timeout_set(void *data, u64 val)
{
struct hci_dev *hdev = data;
@@ -1199,9 +1248,12 @@ static int __hci_init(struct hci_dev *hdev)
hdev, &voice_setting_fops);
}
- if (lmp_ssp_capable(hdev))
+ if (lmp_ssp_capable(hdev)) {
debugfs_create_file("auto_accept_delay", 0644, hdev->debugfs,
hdev, &auto_accept_delay_fops);
+ debugfs_create_file("ssp_debug_mode", 0644, hdev->debugfs,
+ hdev, &ssp_debug_mode_fops);
+ }
if (lmp_sniff_capable(hdev)) {
debugfs_create_file("idle_timeout", 0644, hdev->debugfs,
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 1214d4b..5935f74 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -198,6 +198,8 @@ static void hci_cc_reset(struct hci_dev *hdev, struct sk_buff *skb)
memset(hdev->scan_rsp_data, 0, sizeof(hdev->scan_rsp_data));
hdev->scan_rsp_data_len = 0;
+
+ hdev->ssp_debug_mode = 0;
}
static void hci_cc_write_local_name(struct hci_dev *hdev, struct sk_buff *skb)
--
1.8.3.1
next reply other threads:[~2013-10-19 14:09 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-10-19 14:09 Marcel Holtmann [this message]
2013-10-19 16:07 ` [PATCH v2 1/3] Bluetooth: Add support for setting SSP debug mode Johan Hedberg
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1382191753-59287-1-git-send-email-marcel@holtmann.org \
--to=marcel@holtmann.org \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox