Linux bluetooth development
 help / color / mirror / Atom feed
From: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To: linux-bluetooth@vger.kernel.org
Subject: [RFC v4 0/6] Bluetooth LE 6LoWPAN
Date: Wed, 13 Nov 2013 12:11:29 +0200	[thread overview]
Message-ID: <1384337495-9043-1-git-send-email-jukka.rissanen@linux.intel.com> (raw)

Hi,

this is 6LoWPAN code for BT LE as described in
http://tools.ietf.org/html/draft-ietf-6lowpan-btle-12

v4:
- removed the route setting code, neighbour discovery
  should allow the devices to discover each other
- fix the uncompression of Traffic Class in IPv6 header,
  this makes ssh to work between devices over a BT 6lowpan link
- removed setting of /proc conf options, they were useless
  and not to be done in kernel module anyway


v3:
- misc changes according to Marcel's comments
- supports multiple connections / interface
- removed unused fragmentation code
- setup 6lowpan connection automatically if enabled via debugfs

The automatic 6lowpan enabling is done by setting

echo 1 > /sys/kernel/debug/bluetooth/hci0/6lowpan

before devices are connected.


v2:
- Change ARPHRD_IEEE802154 to ARPHRD_RAWIP. The generic code
  in patches 1 and 2 is also sent to netdev mailing list.
- Sending route exporting patch 5 to netdev ml
- Check private/public BT address and toggle universal/local bit
  accordingly in patch 3.
- The virtual interface template name is now shorter (bt%d)
- Various function name renames
- devtype of the interface set to "bluetooth"


v1:
- initial release


TODO:
- Discovery of 6LoWPAN service needs be automatic (UUID support)
- Refactor compression and uncompression code after these are fixed
  in net/ieee802154/6lowpan.c. Bluetooth 6LoWPAN should be able to share
  that part of the code.

Known issues:
- no UUID handling yet


Cheers,
Jukka


Jukka Rissanen (6):
  net: if_arp: add ARPHRD_RAWIP type
  ipv6: Add checks for RAWIP ARP type
  Bluetooth: Initial skeleton code for BT 6LoWPAN
  Bluetooth: Enable 6LoWPAN support for BT LE devices
  Bluetooth: Enable 6LoWPAN if device supports it
  Bluetooth: Manually enable or disable 6LoWPAN between devices

 include/net/bluetooth/hci.h      |    1 +
 include/net/bluetooth/hci_core.h |    1 +
 include/net/bluetooth/l2cap.h    |    1 +
 include/uapi/linux/if_arp.h      |    1 +
 net/bluetooth/6lowpan.c          | 1687 ++++++++++++++++++++++++++++++++++++++
 net/bluetooth/6lowpan.h          |   27 +
 net/bluetooth/Makefile           |    2 +-
 net/bluetooth/hci_core.c         |    4 +
 net/bluetooth/hci_event.c        |    3 +
 net/bluetooth/l2cap_core.c       |   25 +-
 net/ipv6/addrconf.c              |    4 +-
 11 files changed, 1753 insertions(+), 3 deletions(-)
 create mode 100644 net/bluetooth/6lowpan.c
 create mode 100644 net/bluetooth/6lowpan.h

-- 
1.8.3.1


             reply	other threads:[~2013-11-13 10:11 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-11-13 10:11 Jukka Rissanen [this message]
2013-11-13 10:11 ` [RFC v4 1/6] net: if_arp: add ARPHRD_RAWIP type Jukka Rissanen
2013-11-13 10:11 ` [RFC v4 2/6] ipv6: Add checks for RAWIP ARP type Jukka Rissanen
2013-11-13 10:11 ` [RFC v4 3/6] Bluetooth: Initial skeleton code for BT 6LoWPAN Jukka Rissanen
2013-11-14  7:58   ` Marcel Holtmann
2013-11-13 10:11 ` [RFC v4 4/6] Bluetooth: Enable 6LoWPAN support for BT LE devices Jukka Rissanen
2013-11-13 10:11 ` [RFC v4 5/6] Bluetooth: Enable 6LoWPAN if device supports it Jukka Rissanen
2013-11-13 10:11 ` [RFC v4 6/6] Bluetooth: Manually enable or disable 6LoWPAN between devices Jukka Rissanen
2013-11-14  8:07   ` Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1384337495-9043-1-git-send-email-jukka.rissanen@linux.intel.com \
    --to=jukka.rissanen@linux.intel.com \
    --cc=linux-bluetooth@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox