From: Jukka Rissanen <jukka.rissanen@linux.intel.com>
To: linux-bluetooth@vger.kernel.org
Subject: [RFC v5 0/5] Bluetooth LE 6LoWPAN
Date: Wed, 20 Nov 2013 14:07:18 +0200 [thread overview]
Message-ID: <1384949243-829-1-git-send-email-jukka.rissanen@linux.intel.com> (raw)
Hi,
this is 6LoWPAN code for BT LE as described in
http://tools.ietf.org/html/draft-ietf-6lo-btle-00
v5:
- Moved the header compression functionality to net/core/6lowpan.c
and rebased both BT and IEEE 802154 code to use it in patch 1.
I will send a separate patch to net-next for comments.
- locking fixes
- debugfs handling moved to hci_core.c
- misc changes according to Marcel's comments
v4:
- removed the route setting code, neighbour discovery
should allow the devices to discover each other
- fix the uncompression of Traffic Class in IPv6 header,
this makes ssh to work between devices over a BT 6lowpan link
- removed setting of /proc conf options, they were useless
and not to be done in kernel module anyway
v3:
- misc changes according to Marcel's comments
- supports multiple connections / interface
- removed unused fragmentation code
- setup 6lowpan connection automatically if enabled via debugfs
The automatic 6lowpan enabling is done by setting
echo 1 > /sys/kernel/debug/bluetooth/hci0/6lowpan
before devices are connected.
v2:
- Change ARPHRD_IEEE802154 to ARPHRD_RAWIP. The generic code
in patches 1 and 2 is also sent to netdev mailing list.
- Sending route exporting patch 5 to netdev ml
- Check private/public BT address and toggle universal/local bit
accordingly in patch 3.
- The virtual interface template name is now shorter (bt%d)
- Various function name renames
- devtype of the interface set to "bluetooth"
v1:
- initial release
TODO:
- Discovery of 6LoWPAN service needs be automatic (UUID support)
- Enable/disable header compression for easier debugging
Known issues:
- no UUID handling yet
Cheers,
Jukka
Jukka Rissanen (5):
6lowpan: Moving generic parts into net/core/6lowpan.c
net: if_arp: add ARPHRD_RAWIP type
ipv6: Add checks for RAWIP ARP type
Bluetooth: Enable 6LoWPAN support for BT LE devices
Bluetooth: Manually enable or disable 6LoWPAN between devices
include/net/bluetooth/hci.h | 1 +
include/net/bluetooth/hci_core.h | 1 +
include/net/bluetooth/l2cap.h | 1 +
include/uapi/linux/if_arp.h | 1 +
net/bluetooth/6lowpan.c | 880 +++++++++++++++++++++++++++++++++++++++
net/bluetooth/6lowpan.h | 26 ++
net/bluetooth/Makefile | 2 +-
net/bluetooth/hci_core.c | 93 +++++
net/bluetooth/hci_event.c | 3 +
net/bluetooth/l2cap_core.c | 14 +-
net/core/6lowpan.c | 812 ++++++++++++++++++++++++++++++++++++
net/core/6lowpan.h | 279 +++++++++++++
net/core/Makefile | 8 +
net/ieee802154/6lowpan.c | 708 +------------------------------
net/ieee802154/6lowpan.h | 247 -----------
net/ipv6/addrconf.c | 4 +-
16 files changed, 2135 insertions(+), 945 deletions(-)
create mode 100644 net/bluetooth/6lowpan.c
create mode 100644 net/bluetooth/6lowpan.h
create mode 100644 net/core/6lowpan.c
create mode 100644 net/core/6lowpan.h
delete mode 100644 net/ieee802154/6lowpan.h
--
1.8.3.1
next reply other threads:[~2013-11-20 12:07 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-11-20 12:07 Jukka Rissanen [this message]
2013-11-20 12:07 ` [RFC v5 1/5] 6lowpan: Moving generic parts into net/core/6lowpan.c Jukka Rissanen
2013-11-20 12:07 ` [RFC v5 2/5] net: if_arp: add ARPHRD_RAWIP type Jukka Rissanen
2013-11-20 12:07 ` [RFC v5 3/5] ipv6: Add checks for RAWIP ARP type Jukka Rissanen
2013-11-20 12:07 ` [RFC v5 4/5] Bluetooth: Enable 6LoWPAN support for BT LE devices Jukka Rissanen
2013-11-20 12:07 ` [RFC v5 5/5] Bluetooth: Manually enable or disable 6LoWPAN between devices Jukka Rissanen
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1384949243-829-1-git-send-email-jukka.rissanen@linux.intel.com \
--to=jukka.rissanen@linux.intel.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox