From: johan.hedberg@gmail.com
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH v2 15/32] Bluetooth: Add LE L2CAP flow control mode
Date: Thu, 5 Dec 2013 15:11:13 +0200 [thread overview]
Message-ID: <1386249090-10236-16-git-send-email-johan.hedberg@gmail.com> (raw)
In-Reply-To: <1386249090-10236-1-git-send-email-johan.hedberg@gmail.com>
From: Johan Hedberg <johan.hedberg@intel.com>
The LE connection oriented channels have their own mode with its own
data transfer rules. In order to implement this properly we need to
distinguish L2CAP channels operating in this mode from other modes.
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
---
include/net/bluetooth/l2cap.h | 7 +++++++
net/bluetooth/l2cap_core.c | 13 +++++++++++++
net/bluetooth/l2cap_sock.c | 21 ++++++++++++++++++---
3 files changed, 38 insertions(+), 3 deletions(-)
diff --git a/include/net/bluetooth/l2cap.h b/include/net/bluetooth/l2cap.h
index b622ccc0ab64..c60498907180 100644
--- a/include/net/bluetooth/l2cap.h
+++ b/include/net/bluetooth/l2cap.h
@@ -328,6 +328,12 @@ struct l2cap_conf_rfc {
#define L2CAP_MODE_ERTM 0x03
#define L2CAP_MODE_STREAMING 0x04
+/* Unlike the above this one doesn't actually map to anything that would
+ * ever be sent over the air. Therefore, use a value that's unlikely to
+ * ever be used in the BR/EDR configuration phase.
+ */
+#define L2CAP_MODE_LE_FLOWCTL 0x80
+
struct l2cap_conf_efs {
__u8 id;
__u8 stype;
@@ -861,6 +867,7 @@ int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
void l2cap_chan_busy(struct l2cap_chan *chan, int busy);
int l2cap_chan_check_security(struct l2cap_chan *chan);
void l2cap_chan_set_defaults(struct l2cap_chan *chan);
+void l2cap_le_flowctl_init(struct l2cap_chan *chan);
int l2cap_ertm_init(struct l2cap_chan *chan);
void l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan);
void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan);
diff --git a/net/bluetooth/l2cap_core.c b/net/bluetooth/l2cap_core.c
index cc7421568c68..4ca6fbc777f0 100644
--- a/net/bluetooth/l2cap_core.c
+++ b/net/bluetooth/l2cap_core.c
@@ -490,6 +490,13 @@ void l2cap_chan_set_defaults(struct l2cap_chan *chan)
set_bit(FLAG_FORCE_ACTIVE, &chan->flags);
}
+void l2cap_le_flowctl_init(struct l2cap_chan *chan)
+{
+ chan->imtu = L2CAP_DEFAULT_MTU;
+ chan->omtu = L2CAP_LE_MIN_MTU;
+ chan->mode = L2CAP_MODE_LE_FLOWCTL;
+}
+
void __l2cap_chan_add(struct l2cap_conn *conn, struct l2cap_chan *chan)
{
BT_DBG("conn %p, psm 0x%2.2x, dcid 0x%4.4x", conn,
@@ -597,6 +604,9 @@ void l2cap_chan_del(struct l2cap_chan *chan, int err)
case L2CAP_MODE_BASIC:
break;
+ case L2CAP_MODE_LE_FLOWCTL:
+ break;
+
case L2CAP_MODE_ERTM:
__clear_retrans_timer(chan);
__clear_monitor_timer(chan);
@@ -1849,6 +1859,7 @@ int l2cap_chan_connect(struct l2cap_chan *chan, __le16 psm, u16 cid,
switch (chan->mode) {
case L2CAP_MODE_BASIC:
+ case L2CAP_MODE_LE_FLOWCTL:
break;
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
@@ -2530,6 +2541,7 @@ int l2cap_chan_send(struct l2cap_chan *chan, struct msghdr *msg, size_t len,
switch (chan->mode) {
case L2CAP_MODE_BASIC:
+ case L2CAP_MODE_LE_FLOWCTL:
/* Check outgoing MTU */
if (len > chan->omtu)
return -EMSGSIZE;
@@ -6619,6 +6631,7 @@ static void l2cap_data_channel(struct l2cap_conn *conn, u16 cid,
goto drop;
switch (chan->mode) {
+ case L2CAP_MODE_LE_FLOWCTL:
case L2CAP_MODE_BASIC:
/* If socket recv buffers overflows we drop data here
* which is *bad* because L2CAP has to be reliable.
diff --git a/net/bluetooth/l2cap_sock.c b/net/bluetooth/l2cap_sock.c
index 5a1d0cb0b8d5..485ca349fed5 100644
--- a/net/bluetooth/l2cap_sock.c
+++ b/net/bluetooth/l2cap_sock.c
@@ -130,6 +130,9 @@ static int l2cap_sock_bind(struct socket *sock, struct sockaddr *addr, int alen)
bacpy(&chan->src, &la.l2_bdaddr);
chan->src_type = la.l2_bdaddr_type;
+ if (chan->psm && bdaddr_type_is_le(chan->src_type))
+ l2cap_le_flowctl_init(chan);
+
chan->state = BT_BOUND;
sk->sk_state = BT_BOUND;
@@ -200,6 +203,9 @@ static int l2cap_sock_connect(struct socket *sock, struct sockaddr *addr,
return -EINVAL;
}
+ if (chan->psm && bdaddr_type_is_le(chan->src_type))
+ l2cap_le_flowctl_init(chan);
+
err = l2cap_chan_connect(chan, la.l2_psm, __le16_to_cpu(la.l2_cid),
&la.l2_bdaddr, la.l2_bdaddr_type);
if (err)
@@ -237,6 +243,7 @@ static int l2cap_sock_listen(struct socket *sock, int backlog)
switch (chan->mode) {
case L2CAP_MODE_BASIC:
+ case L2CAP_MODE_LE_FLOWCTL:
break;
case L2CAP_MODE_ERTM:
case L2CAP_MODE_STREAMING:
@@ -588,6 +595,8 @@ static int l2cap_sock_setsockopt_old(struct socket *sock, int optname,
chan->mode = opts.mode;
switch (chan->mode) {
+ case L2CAP_MODE_LE_FLOWCTL:
+ break;
case L2CAP_MODE_BASIC:
clear_bit(CONF_STATE2_DEVICE, &chan->conf_state);
break;
@@ -862,10 +871,16 @@ static int l2cap_sock_recvmsg(struct kiocb *iocb, struct socket *sock,
if (sk->sk_state == BT_CONNECT2 && test_bit(BT_SK_DEFER_SETUP,
&bt_sk(sk)->flags)) {
- sk->sk_state = BT_CONFIG;
- pi->chan->state = BT_CONFIG;
+ if (bdaddr_type_is_le(pi->chan->src_type)) {
+ sk->sk_state = BT_CONNECTED;
+ pi->chan->state = BT_CONNECTED;
+ __l2cap_le_connect_rsp_defer(pi->chan);
+ } else {
+ sk->sk_state = BT_CONFIG;
+ pi->chan->state = BT_CONFIG;
+ __l2cap_connect_rsp_defer(pi->chan);
+ }
- __l2cap_connect_rsp_defer(pi->chan);
err = 0;
goto done;
}
--
1.8.4.2
next prev parent reply other threads:[~2013-12-05 13:11 UTC|newest]
Thread overview: 36+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-05 13:10 [PATCH v2 00/32] Bluetooth: LE CoC support johan.hedberg
2013-12-05 13:10 ` [PATCH v2 01/32] Bluetooth: Remove unnecessary braces from one-line if-statement johan.hedberg
2013-12-05 13:11 ` [PATCH v2 02/32] Bluetooth: Add module parameter to enable LE CoC support johan.hedberg
2013-12-05 13:11 ` [PATCH v2 03/32] Bluetooth: Update l2cap_global_chan_by_psm() to take a link type johan.hedberg
2013-12-05 13:11 ` [PATCH v2 04/32] Bluetooth: Allow l2cap_chan_check_security() to be used for LE links johan.hedberg
2013-12-05 13:11 ` [PATCH v2 05/32] Bluetooth: Pass command length to LE signaling channel handlers johan.hedberg
2013-12-05 13:11 ` [PATCH v2 06/32] Bluetooth: Move LE L2CAP initiator procedure to its own function johan.hedberg
2013-12-05 13:11 ` [PATCH v2 07/32] Bluetooth: Add definitions for LE connection oriented channels johan.hedberg
2013-12-05 13:11 ` [PATCH v2 08/32] Bluetooth: Add initial code for LE L2CAP Connect Request johan.hedberg
2013-12-05 13:11 ` [PATCH v2 09/32] Bluetooth: Add smp_sufficient_security helper function johan.hedberg
2013-12-05 13:11 ` [PATCH v2 10/32] Bluetooth: Refactor L2CAP connect rejection to its own function johan.hedberg
2013-12-05 13:11 ` [PATCH v2 11/32] Bluetooth: Add basic LE L2CAP connect request receiving support johan.hedberg
2013-12-05 13:11 ` [PATCH v2 12/32] Bluetooth: Fix L2CAP channel closing for LE connections johan.hedberg
2013-12-05 13:11 ` [PATCH v2 13/32] Bluetooth: Add L2CAP Disconnect suppport for LE johan.hedberg
2013-12-05 13:11 ` [PATCH v2 14/32] Bluetooth: Make l2cap_le_sig_cmd logic consistent johan.hedberg
2013-12-05 13:11 ` johan.hedberg [this message]
2013-12-05 13:11 ` [PATCH v2 16/32] Bluetooth: Track LE L2CAP credits in l2cap_chan johan.hedberg
2013-12-05 13:11 ` [PATCH v2 17/32] Bluetooth: Limit L2CAP_OPTIONS socket option usage with LE johan.hedberg
2013-12-05 13:11 ` [PATCH v2 18/32] Bluetooth: Add new BT_SNDMTU and BT_RCVMTU socket options johan.hedberg
2013-12-05 13:11 ` [PATCH v2 19/32] Bluetooth: Implement returning of LE L2CAP credits johan.hedberg
2013-12-05 13:11 ` [PATCH v2 20/32] Bluetooth: Add LE flow control discipline johan.hedberg
2013-12-05 13:11 ` [PATCH v2 21/32] Bluetooth: Reject LE CoC commands when the feature is not enabled johan.hedberg
2013-12-05 13:11 ` [PATCH v2 22/32] Bluetooth: Introduce L2CAP channel callback for suspending johan.hedberg
2013-12-05 13:11 ` [PATCH v2 23/32] Bluetooth: Add LE L2CAP segmentation support for outgoing data johan.hedberg
2013-12-05 13:11 ` [PATCH v2 24/32] Bluetooth: Implement LE L2CAP reassembly johan.hedberg
2013-12-05 13:11 ` [PATCH v2 25/32] Bluetooth: Fix LE L2CAP Connect Request handling together with SMP johan.hedberg
2013-12-05 13:11 ` [PATCH v2 26/32] Bluetooth: Fix suspending the L2CAP socket if we start with 0 credits johan.hedberg
2013-12-05 13:11 ` [PATCH v2 27/32] Bluetooth: Limit LE MPS to the MTU value johan.hedberg
2013-12-05 13:11 ` [PATCH v2 28/32] Bluetooth: Fix clearing of chan->omtu for LE CoC channels johan.hedberg
2013-12-05 13:11 ` [PATCH v2 29/32] Bluetooth: Fix CID ranges for LE CoC CID allocations johan.hedberg
2013-12-05 13:11 ` [PATCH v2 30/32] Bluetooth: Fix validating LE PSM values johan.hedberg
2013-12-06 0:02 ` Anderson Lizardo
2013-12-06 5:05 ` Johan Hedberg
2013-12-05 13:11 ` [PATCH v2 31/32] Bluetooth: Add debugfs controls for LE CoC MPS and Credits johan.hedberg
2013-12-05 13:11 ` [PATCH v2 32/32] Bluetooth: Simplify l2cap_chan initialization for LE CoC johan.hedberg
2013-12-05 15:06 ` [PATCH v2 00/32] Bluetooth: LE CoC support Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1386249090-10236-16-git-send-email-johan.hedberg@gmail.com \
--to=johan.hedberg@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).