From: Alexander Aring <alex.aring@gmail.com>
To: linux-zigbee-devel@lists.sourceforge.net
Cc: werner@almesberger.net, linux-bluetooth@vger.kernel.org,
Alexander Aring <alex.aring@gmail.com>
Subject: [PATCH v2 bluetooth-next 5/7] 6lowpan: udp use lowpan_fetch_skb function
Date: Tue, 17 Dec 2013 11:32:51 +0100 [thread overview]
Message-ID: <1387276373-23882-6-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1387276373-23882-1-git-send-email-alex.aring@gmail.com>
Cleanup the lowpan_uncompress_udp_header function to use the
lowpan_fetch_skb function.
Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
net/ieee802154/6lowpan_iphc.c | 37 ++++++++++++++++++-------------------
1 file changed, 18 insertions(+), 19 deletions(-)
diff --git a/net/ieee802154/6lowpan_iphc.c b/net/ieee802154/6lowpan_iphc.c
index 8303c93..ee6891f 100644
--- a/net/ieee802154/6lowpan_iphc.c
+++ b/net/ieee802154/6lowpan_iphc.c
@@ -265,40 +265,37 @@ lowpan_uncompress_multicast_daddr(struct sk_buff *skb,
static int
uncompress_udp_header(struct sk_buff *skb, struct udphdr *uh)
{
- u8 tmp;
+ bool fail;
+ u8 tmp = 0, val = 0;
if (!uh)
goto err;
- if (lowpan_fetch_skb_u8(skb, &tmp))
- goto err;
+ fail = lowpan_fetch_skb(skb, &tmp, 1);
if ((tmp & LOWPAN_NHC_UDP_MASK) == LOWPAN_NHC_UDP_ID) {
pr_debug("UDP header uncompression\n");
switch (tmp & LOWPAN_NHC_UDP_CS_P_11) {
case LOWPAN_NHC_UDP_CS_P_00:
- memcpy(&uh->source, &skb->data[0], 2);
- memcpy(&uh->dest, &skb->data[2], 2);
- skb_pull(skb, 4);
+ fail |= lowpan_fetch_skb(skb, &uh->source, 2);
+ fail |= lowpan_fetch_skb(skb, &uh->dest, 2);
break;
case LOWPAN_NHC_UDP_CS_P_01:
- memcpy(&uh->source, &skb->data[0], 2);
- uh->dest = htons(skb->data[2] +
- LOWPAN_NHC_UDP_8BIT_PORT);
- skb_pull(skb, 3);
+ fail |= lowpan_fetch_skb(skb, &uh->source, 2);
+ fail |= lowpan_fetch_skb(skb, &val, 1);
+ uh->dest = htons(val + LOWPAN_NHC_UDP_8BIT_PORT);
break;
case LOWPAN_NHC_UDP_CS_P_10:
- uh->source = htons(skb->data[0] +
- LOWPAN_NHC_UDP_8BIT_PORT);
- memcpy(&uh->dest, &skb->data[1], 2);
- skb_pull(skb, 3);
+ fail |= lowpan_fetch_skb(skb, &val, 1);
+ uh->source = htons(val + LOWPAN_NHC_UDP_8BIT_PORT);
+ fail |= lowpan_fetch_skb(skb, &uh->dest, 2);
break;
case LOWPAN_NHC_UDP_CS_P_11:
+ fail |= lowpan_fetch_skb(skb, &val, 1);
uh->source = htons(LOWPAN_NHC_UDP_4BIT_PORT +
- (skb->data[0] >> 4));
+ (val >> 4));
uh->dest = htons(LOWPAN_NHC_UDP_4BIT_PORT +
- (skb->data[0] & 0x0f));
- skb_pull(skb, 1);
+ (val & 0x0f));
break;
default:
pr_debug("ERROR: unknown UDP format\n");
@@ -314,8 +311,7 @@ uncompress_udp_header(struct sk_buff *skb, struct udphdr *uh)
pr_debug_ratelimited("checksum elided currently not supported");
goto err;
} else {
- memcpy(&uh->check, &skb->data[0], 2);
- skb_pull(skb, 2);
+ fail |= lowpan_fetch_skb(skb, &uh->check, 2);
}
/*
@@ -330,6 +326,9 @@ uncompress_udp_header(struct sk_buff *skb, struct udphdr *uh)
goto err;
}
+ if (fail)
+ goto err;
+
return 0;
err:
return -EINVAL;
--
1.8.5.1
next prev parent reply other threads:[~2013-12-17 10:32 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-12-17 10:32 [PATCH v2 bluetooth-next 0/7] 6lowpan: udp compression/uncompression fix Alexander Aring
2013-12-17 10:32 ` [PATCH v2 bluetooth-next 1/7] 6lowpan: fix udp nullpointer dereferencing Alexander Aring
2013-12-17 10:58 ` Anderson Lizardo
2013-12-17 11:06 ` Alexander Aring
2013-12-17 11:25 ` Alexander Aring
2013-12-17 10:32 ` [PATCH v2 bluetooth-next 2/7] 6lowpan: fix udp compress ordering Alexander Aring
2013-12-17 10:32 ` [PATCH v2 bluetooth-next 3/7] 6lowpan: fix udp byte ordering Alexander Aring
2013-12-17 10:32 ` [PATCH v2 bluetooth-next 4/7] 6lowpan: add udp warning for elided checksum Alexander Aring
2013-12-17 10:32 ` Alexander Aring [this message]
2013-12-17 10:32 ` [PATCH v2 bluetooth-next 6/7] 6lowpan: udp use subtraction on both conditions Alexander Aring
2013-12-17 10:32 ` [PATCH v2 bluetooth-next 7/7] 6lowpan: cleanup udp compress function Alexander Aring
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1387276373-23882-6-git-send-email-alex.aring@gmail.com \
--to=alex.aring@gmail.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=linux-zigbee-devel@lists.sourceforge.net \
--cc=werner@almesberger.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).