linux-bluetooth.vger.kernel.org archive mirror
 help / color / mirror / Atom feed
From: Alexander Aring <alex.aring@gmail.com>
To: linux-zigbee-devel@lists.sourceforge.net
Cc: werner@almesberger.net, linux-bluetooth@vger.kernel.org,
	Alexander Aring <alex.aring@gmail.com>
Subject: [PATCH v3 bluetooth-next 4/8] 6lowpan: fix udp byte ordering
Date: Tue, 17 Dec 2013 14:21:24 +0100	[thread overview]
Message-ID: <1387286488-29382-5-git-send-email-alex.aring@gmail.com> (raw)
In-Reply-To: <1387286488-29382-1-git-send-email-alex.aring@gmail.com>

The incoming udp header in lowpan_compress_udp_header function is
already in network byte order.

Everytime we read this values for source and destination port we need
to convert this value to host byte order.

In the outcoming header we need to set this value in network byte order
which the upcoming process assumes.

Signed-off-by: Alexander Aring <alex.aring@gmail.com>
---
 net/ieee802154/6lowpan_iphc.c | 39 ++++++++++++++++++++-------------------
 1 file changed, 20 insertions(+), 19 deletions(-)

diff --git a/net/ieee802154/6lowpan_iphc.c b/net/ieee802154/6lowpan_iphc.c
index 1933f5b..02bf74d 100644
--- a/net/ieee802154/6lowpan_iphc.c
+++ b/net/ieee802154/6lowpan_iphc.c
@@ -283,20 +283,21 @@ uncompress_udp_header(struct sk_buff *skb, struct udphdr *uh)
 			break;
 		case LOWPAN_NHC_UDP_CS_P_01:
 			memcpy(&uh->source, &skb->data[0], 2);
-			uh->dest =
-			   skb->data[2] + LOWPAN_NHC_UDP_8BIT_PORT;
+			uh->dest = htons(skb->data[2] +
+					 LOWPAN_NHC_UDP_8BIT_PORT);
 			skb_pull(skb, 3);
 			break;
 		case LOWPAN_NHC_UDP_CS_P_10:
-			uh->source = skb->data[0] + LOWPAN_NHC_UDP_8BIT_PORT;
+			uh->source = htons(skb->data[0] +
+					   LOWPAN_NHC_UDP_8BIT_PORT);
 			memcpy(&uh->dest, &skb->data[1], 2);
 			skb_pull(skb, 3);
 			break;
 		case LOWPAN_NHC_UDP_CS_P_11:
-			uh->source =
-			   LOWPAN_NHC_UDP_4BIT_PORT + (skb->data[0] >> 4);
-			uh->dest =
-			   LOWPAN_NHC_UDP_4BIT_PORT + (skb->data[0] & 0x0f);
+			uh->source = htons(LOWPAN_NHC_UDP_4BIT_PORT +
+					   (skb->data[0] >> 4));
+			uh->dest = htons(LOWPAN_NHC_UDP_4BIT_PORT +
+					 (skb->data[0] & 0x0f));
 			skb_pull(skb, 1);
 			break;
 		default:
@@ -306,7 +307,7 @@ uncompress_udp_header(struct sk_buff *skb, struct udphdr *uh)
 		}
 
 		pr_debug("uncompressed UDP ports: src = %d, dst = %d\n",
-			 uh->source, uh->dest);
+			 ntohs(uh->source), ntohs(uh->dest));
 
 		/* copy checksum */
 		memcpy(&uh->check, &skb->data[0], 2);
@@ -318,7 +319,7 @@ uncompress_udp_header(struct sk_buff *skb, struct udphdr *uh)
 		 * frame
 		 */
 		uh->len = htons(skb->len + sizeof(struct udphdr));
-		pr_debug("uncompressed UDP length: src = %d", uh->len);
+		pr_debug("uncompressed UDP length: src = %d", ntohs(uh->len));
 	} else {
 		pr_debug("ERROR: unsupported NH format\n");
 		goto err;
@@ -543,31 +544,31 @@ static void compress_udp_header(u8 **hc06_ptr, struct sk_buff *skb)
 	struct udphdr *uh = udp_hdr(skb);
 	u8 tmp;
 
-	if (((uh->source & LOWPAN_NHC_UDP_4BIT_MASK) ==
-				LOWPAN_NHC_UDP_4BIT_PORT) &&
-	    ((uh->dest & LOWPAN_NHC_UDP_4BIT_MASK) ==
-				LOWPAN_NHC_UDP_4BIT_PORT)) {
+	if (((ntohs(uh->source) & LOWPAN_NHC_UDP_4BIT_MASK) ==
+	     LOWPAN_NHC_UDP_4BIT_PORT) &&
+	    ((ntohs(uh->dest) & LOWPAN_NHC_UDP_4BIT_MASK) ==
+	     LOWPAN_NHC_UDP_4BIT_PORT)) {
 		pr_debug("UDP header: both ports compression to 4 bits\n");
 		tmp = LOWPAN_NHC_UDP_CS_P_11;
 		lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
 		tmp = /* subtraction is faster */
-		   (u8)((uh->dest - LOWPAN_NHC_UDP_4BIT_PORT) +
-		       ((uh->source & LOWPAN_NHC_UDP_4BIT_PORT) << 4));
+		   (u8)((ntohs(uh->dest) - LOWPAN_NHC_UDP_4BIT_PORT) +
+		       ((ntohs(uh->source) & LOWPAN_NHC_UDP_4BIT_PORT) << 4));
 		lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
-	} else if ((uh->dest & LOWPAN_NHC_UDP_8BIT_MASK) ==
+	} else if ((ntohs(uh->dest) & LOWPAN_NHC_UDP_8BIT_MASK) ==
 			LOWPAN_NHC_UDP_8BIT_PORT) {
 		pr_debug("UDP header: remove 8 bits of dest\n");
 		tmp = LOWPAN_NHC_UDP_CS_P_01;
 		lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
 		lowpan_push_hc_data(hc06_ptr, &uh->source, sizeof(uh->source));
-		tmp = (u8)(uh->dest - LOWPAN_NHC_UDP_8BIT_PORT);
+		tmp = (u8)(ntohs(uh->dest) - LOWPAN_NHC_UDP_8BIT_PORT);
 		lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
-	} else if ((uh->source & LOWPAN_NHC_UDP_8BIT_MASK) ==
+	} else if ((ntohs(uh->source) & LOWPAN_NHC_UDP_8BIT_MASK) ==
 			LOWPAN_NHC_UDP_8BIT_PORT) {
 		pr_debug("UDP header: remove 8 bits of source\n");
 		tmp = LOWPAN_NHC_UDP_CS_P_10;
 		lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
-		tmp = (u8)(uh->source - LOWPAN_NHC_UDP_8BIT_PORT);
+		tmp = (u8)(ntohs(uh->source) - LOWPAN_NHC_UDP_8BIT_PORT);
 		lowpan_push_hc_data(hc06_ptr, &tmp, sizeof(tmp));
 		lowpan_push_hc_data(hc06_ptr, &uh->dest, sizeof(uh->dest));
 	} else {
-- 
1.8.5.1


  parent reply	other threads:[~2013-12-17 13:21 UTC|newest]

Thread overview: 10+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2013-12-17 13:21 [PATCH v3 bluetooth-next 0/8] 6lowpan: udp compression/uncompression fix Alexander Aring
2013-12-17 13:21 ` [PATCH v3 bluetooth-next 1/8] 6lowpan: introduce lowpan_push_hc_data function Alexander Aring
2013-12-17 13:21 ` [PATCH v3 bluetooth-next 2/8] 6lowpan: udp use " Alexander Aring
2013-12-17 13:21 ` [PATCH v3 bluetooth-next 3/8] 6lowpan: fix udp compress ordering Alexander Aring
2013-12-17 13:21 ` Alexander Aring [this message]
2013-12-17 13:21 ` [PATCH v3 bluetooth-next 5/8] 6lowpan: add udp warning for elided checksum Alexander Aring
2013-12-17 13:21 ` [PATCH v3 bluetooth-next 6/8] 6lowpan: udp use lowpan_fetch_skb function Alexander Aring
2013-12-17 13:21 ` [PATCH v3 bluetooth-next 7/8] 6lowpan: udp use subtraction on both conditions Alexander Aring
2013-12-17 13:21 ` [PATCH v3 bluetooth-next 8/8] 6lowpan: cleanup udp compress function Alexander Aring
2013-12-17 14:18 ` [PATCH v3 bluetooth-next 0/8] 6lowpan: udp compression/uncompression fix Marcel Holtmann

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=1387286488-29382-5-git-send-email-alex.aring@gmail.com \
    --to=alex.aring@gmail.com \
    --cc=linux-bluetooth@vger.kernel.org \
    --cc=linux-zigbee-devel@lists.sourceforge.net \
    --cc=werner@almesberger.net \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).