From: Carsten Otto <carsten.otto@gmail.com>
To: bluez-devel@lists.sourceforge.net
Subject: [Bluez-devel] Acer BT900 Headset profile
Date: Fri, 22 Apr 2005 18:17:05 +0200 [thread overview]
Message-ID: <13e9886105042209171edb0fba@mail.gmail.com> (raw)
Hello!
I am quite unsure whether my USB adapter supports everything I need,
but with Class 1 and and higher number in the name (BT900) than I saw
elsewhere I don't think that is a problem.
I was able to setup everything, but can't manage to get more than
noise out of my headset. Whenevery I play sounds (or pipe something
into /dev/dsp1) the noise starts and stops just when the sound is
finished.
Please tell me where the problem could be.
Some information:
- The headset is a Logitech Mobile Bluetooth Headset
- headset info:
Requesting information ...
BD Address: 00:0D:44:02:02:85
Device Name: Logitech HS01
LMP Version: 1.1 (0x1) LMP Subversion: 0x3f0
Manufacturer: Cambridge Silicon Radio (10)
Features: 0xff 0xff 0x0f 0x00 0x00 0x00 0x00 0x00
<3-slot packets> <5-slot packets> <encryption> <slot offset=
>=20
<timing accuracy> <role switch> <hold mode> <sniff mode>=20
<park state> <RSSI> <channel quality> <SCO link> <HV2 packe=
ts>=20
<HV3 packets> <u-law log> <A-law log> <CVSD> <paging scheme=
>=20
<power control> <transparent SCO>=20
- Connections:
< ACL 00:0D:44:02:02:85 handle 6 state 1 lm MASTER=20
- Playing a sound:
btsco v0.4a
Device is 1:0
Voice setting: 0x0060
RFCOMM channel 1 connected
speaker volume: 15 mic volume: 15
driver is in use
connected SCO channel
Done setting sco fd
recieved AT+VGS=3D15
Sending up speaker change 15
- amixer:
Simple mixer control 'Master',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 15
Mono: 15 [100%]
Simple mixer control 'Mic',0
Capabilities: volume volume-joined
Playback channels: Mono
Limits: 0 - 15
Mono: 15 [100%]
Simple mixer control 'Loopback',0
Capabilities: pswitch pswitch-joined
Playback channels: Mono
Mono: Playback [on]
- /proc/bus/usb/devices
T: Bus=3D03 Lev=3D01 Prnt=3D01 Port=3D00 Cnt=3D01 Dev#=3D 2 Spd=3D12 MxC=
h=3D 0
D: Ver=3D 1.10 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 MxPS=3D64 #Cfgs=3D 1
P: Vendor=3D0a5c ProdID=3D200a Rev=3D 0.01
S: Manufacturer=3DBroadcom
S: Product=3DCCBT2035BDGP23-1
S: SerialNumber=3D000272C32BDA
C:* #Ifs=3D 3 Cfg#=3D 1 Atr=3Da0 MxPwr=3D100mA
I: If#=3D 0 Alt=3D 0 #EPs=3D 3 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3Dhci_usb
E: Ad=3D81(I) Atr=3D03(Int.) MxPS=3D 16 Ivl=3D1ms
E: Ad=3D82(I) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
E: Ad=3D02(O) Atr=3D02(Bulk) MxPS=3D 64 Ivl=3D0ms
I: If#=3D 1 Alt=3D 0 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 0 Ivl=3D1ms
I: If#=3D 1 Alt=3D 1 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 9 Ivl=3D1ms
I: If#=3D 1 Alt=3D 2 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 17 Ivl=3D1ms
I: If#=3D 1 Alt=3D 3 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 32 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 32 Ivl=3D1ms
I: If#=3D 1 Alt=3D 4 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
I: If#=3D 1 Alt=3D 5 #EPs=3D 2 Cls=3De0(unk. ) Sub=3D01 Prot=3D01 Driver=
=3D(none)
E: Ad=3D83(I) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
E: Ad=3D03(O) Atr=3D01(Isoc) MxPS=3D 64 Ivl=3D1ms
I: If#=3D 2 Alt=3D 0 #EPs=3D 2 Cls=3Dff(vend.) Sub=3Dff Prot=3Dff Driver=
=3D(none)
E: Ad=3D84(I) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms
E: Ad=3D04(O) Atr=3D02(Bulk) MxPS=3D 32 Ivl=3D0ms
Please write if you need more information.
Thanks for any hint,
--=20
Carsten Otto
carsten.otto@gmail.com
www.c-otto.de
-------------------------------------------------------
SF email is sponsored by - The IT Product Guide
Read honest & candid reviews on hundreds of IT Products from real users.
Discover which products truly live up to the hype. Start reading now.
http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click
_______________________________________________
Bluez-devel mailing list
Bluez-devel@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinfo/bluez-devel
next reply other threads:[~2005-04-22 16:17 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2005-04-22 16:17 Carsten Otto [this message]
2005-04-22 19:18 ` [Bluez-devel] Acer BT900 Headset profile Marcel Holtmann
2005-04-22 20:23 ` Brad Midgley
2005-04-22 21:36 ` Marcel Holtmann
2005-04-22 22:53 ` Brad Midgley
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=13e9886105042209171edb0fba@mail.gmail.com \
--to=carsten.otto@gmail.com \
--cc=bluez-devel@lists.sourceforge.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox