From: Frederic Danis <frederic.danis@linux.intel.com>
To: linux-bluetooth@vger.kernel.org
Subject: [PATCH v2 4/5] Bluetooth: btbcm: Split setup() function
Date: Thu, 7 May 2015 16:24:58 +0200 [thread overview]
Message-ID: <1431008699-6419-4-git-send-email-frederic.danis@linux.intel.com> (raw)
In-Reply-To: <1431008699-6419-1-git-send-email-frederic.danis@linux.intel.com>
Split btbcm_setup_patchram in 3 functions : btbcm_setup_patchram,
btbcm_patchram (already existing) and btbcm_setup_post.
For UART controllers this will allow to reset speed to default one
after firmware loading, which will have reseted controller speed to
default one.
Signed-off-by: Frederic Danis <frederic.danis@linux.intel.com>
---
drivers/bluetooth/btbcm.c | 29 +++++++++++++++++------------
drivers/bluetooth/btbcm.h | 11 +++++++++--
drivers/bluetooth/btusb.c | 23 ++++++++++++++++++++++-
drivers/bluetooth/hci_bcm.c | 19 ++++++++++++++++++-
4 files changed, 66 insertions(+), 16 deletions(-)
diff --git a/drivers/bluetooth/btbcm.c b/drivers/bluetooth/btbcm.c
index b258454..f2efbbd 100644
--- a/drivers/bluetooth/btbcm.c
+++ b/drivers/bluetooth/btbcm.c
@@ -277,9 +277,8 @@ static const struct {
{ }
};
-int btbcm_setup_patchram(struct hci_dev *hdev)
+int btbcm_setup_patchram(struct hci_dev *hdev, char *fw_name, size_t len)
{
- char fw_name[64];
u16 subver, rev, pid, vid;
const char *hw_name = NULL;
struct sk_buff *skb;
@@ -319,8 +318,7 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
}
}
- snprintf(fw_name, sizeof(fw_name), "brcm/%s.hcd",
- hw_name ? : "BCM");
+ snprintf(fw_name, len, "brcm/%s.hcd", hw_name ? : "BCM");
break;
case 1:
case 2:
@@ -340,7 +338,7 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
}
}
- snprintf(fw_name, sizeof(fw_name), "brcm/%s-%4.4x-%4.4x.hcd",
+ snprintf(fw_name, len, "brcm/%s-%4.4x-%4.4x.hcd",
hw_name ? : "BCM", vid, pid);
break;
default:
@@ -351,9 +349,16 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
hw_name ? : "BCM", (subver & 0x7000) >> 13,
(subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
- err = btbcm_patchram(hdev, fw_name);
- if (err == -ENOENT)
- return 0;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
+
+int btbcm_setup_post(struct hci_dev *hdev)
+{
+ struct sk_buff *skb;
+ struct hci_rp_read_local_version *ver;
+ u16 subver, rev;
+ int err;
/* Reset */
err = btbcm_reset(hdev);
@@ -370,9 +375,9 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
subver = le16_to_cpu(ver->lmp_subver);
kfree_skb(skb);
- BT_INFO("%s: %s (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
- hw_name ? : "BCM", (subver & 0x7000) >> 13,
- (subver & 0x1f00) >> 8, (subver & 0x00ff), rev & 0x0fff);
+ BT_INFO("%s: BCM (%3.3u.%3.3u.%3.3u) build %4.4u", hdev->name,
+ (subver & 0x7000) >> 13, (subver & 0x1f00) >> 8,
+ (subver & 0x00ff), rev & 0x0fff);
btbcm_check_bdaddr(hdev);
@@ -380,7 +385,7 @@ int btbcm_setup_patchram(struct hci_dev *hdev)
return 0;
}
-EXPORT_SYMBOL_GPL(btbcm_setup_patchram);
+EXPORT_SYMBOL_GPL(btbcm_setup_post);
int btbcm_setup_apple(struct hci_dev *hdev)
{
diff --git a/drivers/bluetooth/btbcm.h b/drivers/bluetooth/btbcm.h
index eb6ab5f..73d92a2 100644
--- a/drivers/bluetooth/btbcm.h
+++ b/drivers/bluetooth/btbcm.h
@@ -27,7 +27,8 @@ int btbcm_check_bdaddr(struct hci_dev *hdev);
int btbcm_set_bdaddr(struct hci_dev *hdev, const bdaddr_t *bdaddr);
int btbcm_patchram(struct hci_dev *hdev, const char *firmware);
-int btbcm_setup_patchram(struct hci_dev *hdev);
+int btbcm_setup_patchram(struct hci_dev *hdev, char *fw_name, size_t len);
+int btbcm_setup_post(struct hci_dev *hdev);
int btbcm_setup_apple(struct hci_dev *hdev);
#else
@@ -47,7 +48,13 @@ static inline int btbcm_patchram(struct hci_dev *hdev, const char *firmware)
return -EOPNOTSUPP;
}
-static inline int btbcm_setup_patchram(struct hci_dev *hdev)
+static inline int btbcm_setup_patchram(struct hci_dev *hdev, char *fw_name,
+ size_t len)
+{
+ return 0;
+}
+
+static int btbcm_setup_post(struct hci_dev *hdev)
{
return 0;
}
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 77c1f8c..15225d9 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -1333,6 +1333,27 @@ static int btusb_setup_bcm92035(struct hci_dev *hdev)
return 0;
}
+#ifdef CONFIG_BT_HCIBTUSB_BCM
+static int btusb_setup_bcm(struct hci_dev *hdev)
+{
+ char fw_name[64];
+ int err;
+
+ err = btbcm_setup_patchram(hdev, fw_name, sizeof(fw_name));
+ if (err)
+ return err;
+
+ err = btbcm_patchram(hdev, fw_name);
+ /* If there is no firmware (-ENOENT), discard the error and continue */
+ if (err == -ENOENT)
+ return 0;
+
+ err = btbcm_setup_post(hdev);
+
+ return err;
+}
+#endif
+
static int btusb_setup_csr(struct hci_dev *hdev)
{
struct hci_rp_read_local_version *rp;
@@ -3132,7 +3153,7 @@ static int btusb_probe(struct usb_interface *intf,
#ifdef CONFIG_BT_HCIBTUSB_BCM
if (id->driver_info & BTUSB_BCM_PATCHRAM) {
- hdev->setup = btbcm_setup_patchram;
+ hdev->setup = btusb_setup_bcm;
hdev->set_bdaddr = btbcm_set_bdaddr;
}
diff --git a/drivers/bluetooth/hci_bcm.c b/drivers/bluetooth/hci_bcm.c
index 1ec0b4a..0e77b9a 100644
--- a/drivers/bluetooth/hci_bcm.c
+++ b/drivers/bluetooth/hci_bcm.c
@@ -79,11 +79,28 @@ static int bcm_flush(struct hci_uart *hu)
static int bcm_setup(struct hci_uart *hu)
{
+ char fw_name[64];
+ int err;
+
BT_DBG("hu %p", hu);
hu->hdev->set_bdaddr = btbcm_set_bdaddr;
- return btbcm_setup_patchram(hu->hdev);
+ err = btbcm_setup_patchram(hu->hdev, fw_name, sizeof(fw_name));
+ if (err)
+ return err;
+
+ err = btbcm_patchram(hu->hdev, fw_name);
+ /* If there is no firmware (-ENOENT), discard the error and continue */
+ if (err == -ENOENT)
+ return 0;
+
+ if (hu->proto->default_speed)
+ hci_uart_set_baudrate(hu, hu->proto->default_speed);
+
+ err = btbcm_setup_post(hu->hdev);
+
+ return err;
}
static const struct h4_recv_pkt bcm_recv_pkts[] = {
--
1.9.1
next prev parent reply other threads:[~2015-05-07 14:24 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-05-07 14:24 [PATCH v2 1/5] Bluetooth: hci_core: return cmd status in __hci_cmd_sync() Frederic Danis
2015-05-07 14:24 ` [PATCH v2 2/5] Bluetooth: btbcm: Add BCM4324B3 UART device Frederic Danis
2015-05-07 16:19 ` Marcel Holtmann
2015-05-13 14:10 ` Frederic Danis
2015-05-07 14:24 ` [PATCH v2 3/5] Bluetooth: hci_uart: Support operational speed during setup Frederic Danis
2015-05-07 16:13 ` Marcel Holtmann
2015-05-07 14:24 ` Frederic Danis [this message]
2015-05-07 16:22 ` [PATCH v2 4/5] Bluetooth: btbcm: Split setup() function Marcel Holtmann
2015-05-15 14:11 ` Frederic Danis
2015-05-15 17:17 ` Marcel Holtmann
2015-05-07 14:24 ` [PATCH v2 5/5] Bluetooth: btbcm: Add bcm_set_baudrate() Frederic Danis
2015-05-07 16:16 ` Marcel Holtmann
2015-05-07 16:11 ` [PATCH v2 1/5] Bluetooth: hci_core: return cmd status in __hci_cmd_sync() Marcel Holtmann
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1431008699-6419-4-git-send-email-frederic.danis@linux.intel.com \
--to=frederic.danis@linux.intel.com \
--cc=linux-bluetooth@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).