* [PATCH] ath3k: Add support of AR3012 0cf3:817b device
@ 2015-10-16 8:45 Dmitry Tunin
2015-10-19 20:50 ` Marcel Holtmann
0 siblings, 1 reply; 2+ messages in thread
From: Dmitry Tunin @ 2015-10-16 8:45 UTC (permalink / raw)
To: Marcel Holtmann, Gustavo Padovan, Johan Hedberg
Cc: linux-bluetooth, linux-kernel, Dmitry Tunin, stable
T: Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
P: Vendor=0cf3 ProdID=817b Rev=00.02
C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
BugLink: https://bugs.launchpad.net/bugs/1506615
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Cc: stable@vger.kernel.org
---
drivers/bluetooth/ath3k.c | 2 ++
drivers/bluetooth/btusb.c | 1 +
2 files changed, 3 insertions(+)
diff --git a/drivers/bluetooth/ath3k.c b/drivers/bluetooth/ath3k.c
index e527a3e..5515b5b 100644
--- a/drivers/bluetooth/ath3k.c
+++ b/drivers/bluetooth/ath3k.c
@@ -104,6 +104,7 @@ static const struct usb_device_id ath3k_table[] = {
{ USB_DEVICE(0x0CF3, 0x311F) },
{ USB_DEVICE(0x0cf3, 0x3121) },
{ USB_DEVICE(0x0CF3, 0x817a) },
+ { USB_DEVICE(0x0CF3, 0x817b) },
{ USB_DEVICE(0x0cf3, 0xe003) },
{ USB_DEVICE(0x0CF3, 0xE004) },
{ USB_DEVICE(0x0CF3, 0xE005) },
@@ -164,6 +165,7 @@ static const struct usb_device_id ath3k_blist_tbl[] = {
{ USB_DEVICE(0x0cf3, 0x311F), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0CF3, 0x817a), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0CF3, 0x817b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe006), .driver_info = BTUSB_ATH3012 },
diff --git a/drivers/bluetooth/btusb.c b/drivers/bluetooth/btusb.c
index 27830da..a884c5a 100644
--- a/drivers/bluetooth/btusb.c
+++ b/drivers/bluetooth/btusb.c
@@ -206,6 +206,7 @@ static const struct usb_device_id blacklist_table[] = {
{ USB_DEVICE(0x0cf3, 0x311f), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x3121), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0x817a), .driver_info = BTUSB_ATH3012 },
+ { USB_DEVICE(0x0cf3, 0x817b), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe003), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe004), .driver_info = BTUSB_ATH3012 },
{ USB_DEVICE(0x0cf3, 0xe005), .driver_info = BTUSB_ATH3012 },
--
1.9.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] ath3k: Add support of AR3012 0cf3:817b device
2015-10-16 8:45 [PATCH] ath3k: Add support of AR3012 0cf3:817b device Dmitry Tunin
@ 2015-10-19 20:50 ` Marcel Holtmann
0 siblings, 0 replies; 2+ messages in thread
From: Marcel Holtmann @ 2015-10-19 20:50 UTC (permalink / raw)
To: Dmitry Tunin
Cc: Gustavo F. Padovan, Johan Hedberg, linux-bluetooth, linux-kernel,
stable
Hi Dmitry,
> T: Bus=04 Lev=02 Prnt=02 Port=04 Cnt=01 Dev#= 3 Spd=12 MxCh= 0
> D: Ver= 1.10 Cls=e0(wlcon) Sub=01 Prot=01 MxPS=64 #Cfgs= 1
> P: Vendor=0cf3 ProdID=817b Rev=00.02
> C: #Ifs= 2 Cfg#= 1 Atr=e0 MxPwr=100mA
> I: If#= 0 Alt= 0 #EPs= 3 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
> I: If#= 1 Alt= 0 #EPs= 2 Cls=e0(wlcon) Sub=01 Prot=01 Driver=btusb
>
> BugLink: https://bugs.launchpad.net/bugs/1506615
>
> Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
> Cc: stable@vger.kernel.org
> ---
> drivers/bluetooth/ath3k.c | 2 ++
> drivers/bluetooth/btusb.c | 1 +
> 2 files changed, 3 insertions(+)
patch has been applied to bluetooth-next tree.
Regards
Marcel
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2015-10-19 20:50 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2015-10-16 8:45 [PATCH] ath3k: Add support of AR3012 0cf3:817b device Dmitry Tunin
2015-10-19 20:50 ` Marcel Holtmann
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).