From mboxrd@z Thu Jan 1 00:00:00 1970 Return-Path: From: David Lechner To: devicetree@vger.kernel.org, linux-bluetooth@vger.kernel.org Cc: David Lechner , Rob Herring , Mark Rutland , Marcel Holtmann , Gustavo Padovan , Johan Hedberg , netdev@vger.kernel.org, linux-kernel@vger.kernel.org Subject: [PATCH v2 2/3] dt-bindings: Add optional nvmem BD address bindings to ti,wlink-st Date: Thu, 7 Dec 2017 20:57:39 -0600 Message-Id: <1512701860-8321-3-git-send-email-david@lechnology.com> In-Reply-To: <1512701860-8321-1-git-send-email-david@lechnology.com> References: <1512701860-8321-1-git-send-email-david@lechnology.com> List-ID: This adds optional nvmem consumer properties to the ti,wlink-st device tree bindings to allow specifying the BD address. Signed-off-by: David Lechner --- v2 changes: * Renamed "mac-address" to "bd-address" * Fixed typos in example * Specify byte order of "bd-address" Documentation/devicetree/bindings/net/ti,wilink-st.txt | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/Documentation/devicetree/bindings/net/ti,wilink-st.txt b/Documentation/devicetree/bindings/net/ti,wilink-st.txt index 1649c1f..a45a508 100644 --- a/Documentation/devicetree/bindings/net/ti,wilink-st.txt +++ b/Documentation/devicetree/bindings/net/ti,wilink-st.txt @@ -32,6 +32,9 @@ Optional properties: See ../clocks/clock-bindings.txt for details. - clock-names : Must include the following entry: "ext_clock" (External clock provided to the TI combo chip). + - nvmem-cells: phandle to nvmem data cell that contains a 6 byte BD address + with the most significant byte first (big-endian). + - nvmem-cell-names: "bd-address" (required when nvmem-cells is specified) Example: @@ -43,5 +46,7 @@ Example: enable-gpios = <&gpio1 7 GPIO_ACTIVE_HIGH>; clocks = <&clk32k_wl18xx>; clock-names = "ext_clock"; + nvmem-cells = <&bd_address>; + nvmem-cell-names = "bd-address"; }; }; -- 2.7.4