From: "Stotland, Inga" <inga.stotland@intel.com>
To: "sbrown@cortland.com" <sbrown@cortland.com>,
"linux-bluetooth@vger.kernel.org"
<linux-bluetooth@vger.kernel.org>
Subject: Re: [PATCH V2 1/8] mesh: meshctl: Change command names to <cmd>-<get/set>
Date: Thu, 14 Dec 2017 08:08:02 +0000 [thread overview]
Message-ID: <1513238880.3023.18.camel@intel.com> (raw)
In-Reply-To: <20171212125832.13440-2-sbrown@cortland.com>
[-- Attachment #1: Type: text/plain, Size: 6088 bytes --]
Hi Steve,
On Tue, 2017-12-12 at 12:58 +0000, sbrown@cortland.com wrote:
> From: Steve Brown <sbrown@cortland.com>
>
> Fix lines over 80 chars
> Move cmd_default()
> Add parameter to pub-set to control retransmit count
> ---
> mesh/config-client.c | 78 +++++++++++++++++++++++++++---------------
> ----------
> 1 file changed, 41 insertions(+), 37 deletions(-)
>
> diff --git a/mesh/config-client.c b/mesh/config-client.c
> index 3d618b6a6..51adf2c52 100644
> --- a/mesh/config-client.c
> +++ b/mesh/config-client.c
> @@ -170,9 +170,9 @@ static bool client_msg_recvd(uint16_t src,
> uint8_t *data,
> if (len != 12 && len != 14)
> return true;
>
> - bt_shell_printf("\nSet publication for node %4.4x
> status: %s\n", src,
> - data[0] == MESH_STATUS_SUCCESS ?
> "Success" :
> - mesh_status_str(data
> [0]));
> + bt_shell_printf("\nSet publication for node %4.4x
> status: %s\n",
> + src, data[0] == MESH_STATUS_SUCCESS
> ?
> + "Success" :
> mesh_status_str(data[0]));
>
> if (data[0] != MESH_STATUS_SUCCESS)
> return true;
> @@ -189,6 +189,7 @@ static bool client_msg_recvd(uint16_t src,
> uint8_t *data,
> pub.ttl = data[7];
> pub.period = data[8];
> n = (data[8] & 0x3f);
> + bt_shell_printf("Publication address: 0x%04x\n",
> pub.u.addr16);
> switch (data[8] >> 6) {
> case 0:
> bt_shell_printf("Period: %d ms\n", n * 100);
> @@ -206,7 +207,8 @@ static bool client_msg_recvd(uint16_t src,
> uint8_t *data,
>
> pub.retransmit = data[9];
> bt_shell_printf("Retransmit count: %d\n", data[9] >>
> 5);
> - bt_shell_printf("Retransmit Interval Steps: %d\n",
> data[9] & 0x1f);
> + bt_shell_printf("Retransmit Interval Steps: %d\n",
> + data[9] & 0x1f);
>
> ele_idx = ele_addr - node_get_primary(node);
>
> @@ -219,6 +221,7 @@ static bool client_msg_recvd(uint16_t src,
> uint8_t *data,
> node_model_pub_get(node,
> ele_idx, mod_id));
> break;
> }
> +
> return true;
> }
>
> @@ -287,6 +290,23 @@ static bool config_send(uint8_t *buf, uint16_t
> len)
>
> }
>
> +static void cmd_default(uint32_t opcode)
> +{
> + uint16_t n;
> + uint8_t msg[32];
> +
> + if (IS_UNASSIGNED(target)) {
> + bt_shell_printf("Destination not set\n");
> + return;
> + }
> +
> + n = mesh_opcode_set(opcode, msg);
> +
> + if (!config_send(msg, n))
> + bt_shell_printf("Failed to send command (opcode
> 0x%x)\n",
> + opco
> de);
> +}
> +
> static void cmd_get_composition(int argc, char *argv[])
> {
> uint16_t n;
> @@ -556,7 +576,7 @@ static void cmd_set_pub(int argc, char *argv[])
> n = mesh_opcode_set(OP_CONFIG_MODEL_PUB_SET, msg);
>
> parm_cnt = read_input_parameters(argc, argv);
> - if (parm_cnt != 5) {
> + if (parm_cnt != 6) {
> bt_shell_printf("Bad arguments\n");
> return;
> }
> @@ -574,14 +594,14 @@ static void cmd_set_pub(int argc, char *argv[])
> /* Publish period step count and step resolution */
> msg[n++] = parms[3];
> /* Publish retransmit count & interval steps */
> - msg[n++] = (1 << 5) + 2;
> + msg[n++] = parms[4];
> /* Model Id */
> - if (parms[4] > 0xffff) {
> - put_le16(parms[4] >> 16, msg + n);
> - put_le16(parms[4], msg + n + 2);
> + if (parms[5] > 0xffff) {
> + put_le16(parms[5] >> 16, msg + n);
> + put_le16(parms[5], msg + n + 2);
> n += 4;
> } else {
> - put_le16(parms[4], msg + n);
> + put_le16(parms[5], msg + n);
> n += 2;
> }
>
> @@ -589,23 +609,6 @@ static void cmd_set_pub(int argc, char *argv[])
> bt_shell_printf("Failed to send \"SET MODEL
> PUBLICATION\"\n");
> }
>
> -static void cmd_default(uint32_t opcode)
> -{
> - uint16_t n;
> - uint8_t msg[32];
> -
> - if (IS_UNASSIGNED(target)) {
> - bt_shell_printf("Destination not set\n");
> - return;
> - }
> -
> - n = mesh_opcode_set(opcode, msg);
> -
> - if (!config_send(msg, n))
> - bt_shell_printf("Failed to send command (opcode
> 0x%x)\n",
> - opco
> de);
> -}
> -
> static void cmd_get_ttl(int argc, char *argv[])
> {
> cmd_default(OP_CONFIG_DEFAULT_TTL_GET);
> @@ -614,27 +617,28 @@ static void cmd_get_ttl(int argc, char *argv[])
> static const struct bt_shell_menu cfg_menu = {
> .name = "config",
> .entries = {
> - {"target", "<unicast>",
> cmd_set_node,
> + {"target", "<unicast>", cmd_se
> t_node,
> "Set target node to
> configure"},
> - {"get-composition", "[<page_num>]", cm
> d_get_composition,
> + {"composition-get", "[<page_num>]", cm
> d_get_composition,
> "Get Composition
> Data"},
> - {"add-netkey", "<net_idx>",
> cmd_add_net_key,
> + {"netkey-add", "<net_idx>", cm
> d_add_net_key,
> "Add network key"},
> - {"del-netkey", "<net_idx>",
> cmd_del_net_key,
> + {"netkey-del", "<net_idx>", cm
> d_del_net_key,
> "Delete network
> key"},
> - {"add-appkey", "<app_idx>",
> cmd_add_app_key,
> + {"appkey-add", "<app_idx>", cm
> d_add_app_key,
> "Add application
> key"},
> - {"del-appkey", "<app_idx>",
> cmd_del_app_key,
> + {"appkey-del", "<app_idx>", cm
> d_del_app_key,
> "Delete application
> key"},
> {"bind", "<ele_idx> <app_idx> <mod_id>
> [cid]",
> cmd_bind, "Bind app key to a
> model"},
> - {"set-ttl", "<ttl>", c
> md_set_ttl,
> + {"ttl-set", "<ttl>", cmd_set_t
> tl,
> "Set default TTL"},
> - {"get-ttl", NULL, cmd_
> get_ttl,
> + {"ttl-get", NULL, cmd_
> get_ttl,
> "Get default TTL"},
> - {"set-pub", "<ele_addr> <pub_addr> <app_idx> "
> - "<period (step|res)>
> <model>",
> + {"pub-set", "<ele_addr> <pub_addr> <app_idx> "
> + "<period (step|res)> <re-xmt (count|per)>
> <model>",
> cmd_set_pub, "Set
> publication"},
> +
> {} },
> };
>
Since you are modifying pub-set command, could you please fix it to
correctly indicate SIG and vendor models, similarly to "bind" command
(adding an optional "cid" parameter for vendor models).
Regards,
Inga Stotland
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3266 bytes --]
next prev parent reply other threads:[~2017-12-14 8:08 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-12 12:58 [PATCH V2 0/8] mesh: Add configuration commands to meshctl sbrown
2017-12-12 12:58 ` [PATCH V2 1/8] mesh: meshctl: Change command names to <cmd>-<get/set> sbrown
2017-12-14 8:08 ` Stotland, Inga [this message]
2017-12-14 9:12 ` Steve Brown
2017-12-15 2:14 ` Stotland, Inga
2017-12-15 6:57 ` Steve Brown
2017-12-12 12:58 ` [PATCH V2 2/8] mesh: meshctl: Add add/get Subscribe sbrown
2017-12-12 12:58 ` [PATCH V2 3/8] mesh: meshctl: Add set heartbeat command sbrown
2017-12-14 8:20 ` Stotland, Inga
2017-12-12 12:58 ` [PATCH V2 4/8] mesh: meshctl: Add get app keys command sbrown
2017-12-12 12:58 ` [PATCH V2 5/8] mesh: meshctl: Add get publish command sbrown
2017-12-12 12:58 ` [PATCH V2 6/8] mesh: meshctl: Add set/get proxy command sbrown
2017-12-12 12:58 ` [PATCH V2 7/8] mesh: meshctl: Add get/set identity sbrown
2017-12-12 12:58 ` [PATCH V2 8/8] mesh: meshctl: Add get/set relay command sbrown
2017-12-13 12:27 ` [PATCH V2 0/8] mesh: Add configuration commands to meshctl Luiz Augusto von Dentz
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1513238880.3023.18.camel@intel.com \
--to=inga.stotland@intel.com \
--cc=linux-bluetooth@vger.kernel.org \
--cc=sbrown@cortland.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).