* [PATCH] mesh: meshctl: Add set heartbeat subscription command
@ 2018-01-12 14:52 sbrown
2018-01-17 6:33 ` Stotland, Inga
0 siblings, 1 reply; 2+ messages in thread
From: sbrown @ 2018-01-12 14:52 UTC (permalink / raw)
To: linux-bluetooth; +Cc: sbrown
From: Steve Brown <sbrown@cortland.com>
[config: Target = 0100]# hb-sub-set 0077 0100 2
Heartbeat subscription status for node 0100 status: Success
Source: 0077
Destination: 0100
Period: 01
Count: 00
Min Hops: 7f
Max Hops: 00
---
mesh/config-client.c | 60 +++++++++++++++++++++++++++++++++++++++++++++++++---
1 file changed, 57 insertions(+), 3 deletions(-)
diff --git a/mesh/config-client.c b/mesh/config-client.c
index f280441cc..e6a2e6e93 100644
--- a/mesh/config-client.c
+++ b/mesh/config-client.c
@@ -318,6 +318,25 @@ static bool client_msg_recvd(uint16_t src, uint8_t *data,
bt_shell_printf("Features:\t%4.4x\n", get_le16(data + 6));
bt_shell_printf("Net_Idx:\t%4.4x\n", get_le16(data + 8));
break;
+
+ /* Per Mesh Profile 4.3.2.66 */
+ case OP_CONFIG_HEARTBEAT_SUB_STATUS:
+ bt_shell_printf("\nHeartbeat subscription status for "
+ "node %4.4x status: %s\n",
+ src,
+ data[0] == MESH_STATUS_SUCCESS ? "Success" :
+ mesh_status_str(data[0]));
+
+ if (data[0] != MESH_STATUS_SUCCESS)
+ return true;
+
+ bt_shell_printf("Source:\t\t%4.4x\n", get_le16(data + 1));
+ bt_shell_printf("Destination:\t%4.4x\n", get_le16(data + 3));
+ bt_shell_printf("Period:\t\t%2.2x\n", data[5]);
+ bt_shell_printf("Count:\t\t%2.2x\n", data[6]);
+ bt_shell_printf("Min Hops:\t%2.2x\n", data[7]);
+ bt_shell_printf("Max Hops:\t%2.2x\n", data[8]);
+ break;
}
return true;
@@ -946,7 +965,7 @@ static void cmd_get_app(int argc, char *argv[])
bt_shell_printf("Failed to send \"GET APP GET\"\n");
}
-static void cmd_set_hb(int argc, char *argv[])
+static void cmd_hb_pub_set(int argc, char *argv[])
{
uint16_t n;
uint8_t msg[32];
@@ -983,7 +1002,40 @@ static void cmd_set_hb(int argc, char *argv[])
n += 2;
if (!config_send(msg, n))
- bt_shell_printf("Failed to send \"SET HEARTBEAT PUBLICATION\"\n");
+ bt_shell_printf("Failed to send \"SET HEARTBEAT PUBLISH\"\n");
+}
+
+static void cmd_hb_sub_set(int argc, char *argv[])
+{
+ uint16_t n;
+ uint8_t msg[32];
+ int parm_cnt;
+
+ if (IS_UNASSIGNED(target)) {
+ bt_shell_printf("Destination not set\n");
+ return;
+ }
+
+ n = mesh_opcode_set(OP_CONFIG_HEARTBEAT_SUB_SET, msg);
+
+ parm_cnt = read_input_parameters(argc, argv);
+ if (parm_cnt != 3) {
+ bt_shell_printf("Bad arguments: %s\n", argv[1]);
+ return;
+ }
+
+ /* Per Mesh Profile 4.3.2.65 */
+ /* Source address */
+ put_le16(parms[0], msg + n);
+ n += 2;
+ /* Destination address */
+ put_le16(parms[1], msg + n);
+ n += 2;
+ /* Period log */
+ msg[n++] = parms[2];
+
+ if (!config_send(msg, n))
+ bt_shell_printf("Failed to send \"SET HEARTBEAT SUBSCRIBE\"\n");
}
static void cmd_get_ttl(int argc, char *argv[])
@@ -1033,7 +1085,9 @@ static const struct bt_shell_menu cfg_menu = {
{"relay-get", NULL, cmd_get_relay,
"Get relay"},
{"hb-pub-set", "<pub_addr> <count> <period> <features> <net_idx>",
- cmd_set_hb, "Set heartbeati publish"},
+ cmd_hb_pub_set, "Set heartbeat publish"},
+ {"hb-sub-set", "<src_addr> <dst_addr> <period>",
+ cmd_hb_sub_set, "Set heartbeat subscribe"},
{"sub-add", "<ele_addr> <sub_addr> <model id>",
cmd_sub_add, "Subscription add"},
{"sub-get", "<ele_addr> <model id>",
--
2.14.1
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH] mesh: meshctl: Add set heartbeat subscription command
2018-01-12 14:52 [PATCH] mesh: meshctl: Add set heartbeat subscription command sbrown
@ 2018-01-17 6:33 ` Stotland, Inga
0 siblings, 0 replies; 2+ messages in thread
From: Stotland, Inga @ 2018-01-17 6:33 UTC (permalink / raw)
To: sbrown@cortland.com, linux-bluetooth@vger.kernel.org
[-- Attachment #1: Type: text/plain, Size: 3941 bytes --]
Hi Steve,
On Fri, 2018-01-12 at 09:52 -0500, sbrown@cortland.com wrote:
> From: Steve Brown <sbrown@cortland.com>
>
> [config: Target = 0100]# hb-sub-set 0077 0100 2
>
> Heartbeat subscription status for node 0100 status: Success
> Source: 0077
> Destination: 0100
> Period: 01
> Count: 00
> Min Hops: 7f
> Max Hops: 00
> ---
> mesh/config-client.c | 60
> +++++++++++++++++++++++++++++++++++++++++++++++++---
> 1 file changed, 57 insertions(+), 3 deletions(-)
>
> diff --git a/mesh/config-client.c b/mesh/config-client.c
> index f280441cc..e6a2e6e93 100644
> --- a/mesh/config-client.c
> +++ b/mesh/config-client.c
> @@ -318,6 +318,25 @@ static bool client_msg_recvd(uint16_t src,
> uint8_t *data,
> bt_shell_printf("Features:\t%4.4x\n", get_le16(data
> + 6));
> bt_shell_printf("Net_Idx:\t%4.4x\n", get_le16(data +
> 8));
> break;
Just one minor suggestion.
Since now you have support for both HB pub and sub, could you please
add a change for the printf of HB publication status to make it
publication specific (currently it prints "Set heartbeat for node"?
> +
> + /* Per Mesh Profile 4.3.2.66 */
> + case OP_CONFIG_HEARTBEAT_SUB_STATUS:
> + bt_shell_printf("\nHeartbeat subscription status for
> "
> + "node %4.4x status: %s\n",
> + src,
> + data[0] == MESH_STATUS_SUCCESS ?
> "Success" :
> + mesh_status_str(data
> [0]));
> +
> + if (data[0] != MESH_STATUS_SUCCESS)
> + return true;
> +
> + bt_shell_printf("Source:\t\t%4.4x\n", get_le16(data
> + 1));
> + bt_shell_printf("Destination:\t%4.4x\n",
> get_le16(data + 3));
> + bt_shell_printf("Period:\t\t%2.2x\n", data[5]);
> + bt_shell_printf("Count:\t\t%2.2x\n", data[6]);
> + bt_shell_printf("Min Hops:\t%2.2x\n", data[7]);
> + bt_shell_printf("Max Hops:\t%2.2x\n", data[8]);
> + break;
> }
>
> return true;
> @@ -946,7 +965,7 @@ static void cmd_get_app(int argc, char *argv[])
> bt_shell_printf("Failed to send \"GET APP GET\"\n");
> }
>
> -static void cmd_set_hb(int argc, char *argv[])
> +static void cmd_hb_pub_set(int argc, char *argv[])
> {
> uint16_t n;
> uint8_t msg[32];
> @@ -983,7 +1002,40 @@ static void cmd_set_hb(int argc, char *argv[])
> n += 2;
>
> if (!config_send(msg, n))
> - bt_shell_printf("Failed to send \"SET HEARTBEAT
> PUBLICATION\"\n");
> + bt_shell_printf("Failed to send \"SET HEARTBEAT
> PUBLISH\"\n");
> +}
> +
> +static void cmd_hb_sub_set(int argc, char *argv[])
> +{
> + uint16_t n;
> + uint8_t msg[32];
> + int parm_cnt;
> +
> + if (IS_UNASSIGNED(target)) {
> + bt_shell_printf("Destination not set\n");
> + return;
> + }
> +
> + n = mesh_opcode_set(OP_CONFIG_HEARTBEAT_SUB_SET, msg);
> +
> + parm_cnt = read_input_parameters(argc, argv);
> + if (parm_cnt != 3) {
> + bt_shell_printf("Bad arguments: %s\n", argv[1]);
> + return;
> + }
> +
> + /* Per Mesh Profile 4.3.2.65 */
> + /* Source address */
> + put_le16(parms[0], msg + n);
> + n += 2;
> + /* Destination address */
> + put_le16(parms[1], msg + n);
> + n += 2;
> + /* Period log */
> + msg[n++] = parms[2];
> +
> + if (!config_send(msg, n))
> + bt_shell_printf("Failed to send \"SET HEARTBEAT
> SUBSCRIBE\"\n");
> }
>
> static void cmd_get_ttl(int argc, char *argv[])
> @@ -1033,7 +1085,9 @@ static const struct bt_shell_menu cfg_menu = {
> {"relay-
> get", NULL, cmd_get_relay,
> "Get relay"},
> {"hb-pub-set", "<pub_addr> <count> <period> <features>
> <net_idx>",
> - cmd_set_hb, "Set heartbeati
> publish"},
> + cmd_hb_pub_set, "Set heartbeat
> publish"},
> + {"hb-sub-set", "<src_addr> <dst_addr> <period>",
> + cmd_hb_sub_set, "Set heartbeat
> subscribe"},
> {"sub-add", "<ele_addr> <sub_addr> <model id>",
> cmd_sub_add, "Subscription add"},
> {"sub-get", "<ele_addr> <model id>",
Regards,
Inga
[-- Attachment #2: smime.p7s --]
[-- Type: application/x-pkcs7-signature, Size: 3266 bytes --]
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2018-01-17 6:33 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2018-01-12 14:52 [PATCH] mesh: meshctl: Add set heartbeat subscription command sbrown
2018-01-17 6:33 ` Stotland, Inga
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).